Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [761 - 780 of 2698]

Punch Press

Ebu HK 80 FR

Germany

2016

used

on request

INNO30150

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

Extruder Line

Battenfeld/gloenco PS-Schaum

Germany

1998

used

on request

INNO30149

A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe.

CNC Lathe

Emag VL 2

Germany

2018

used

on request

INNO30148

A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible.

CNC Machining Center

Micromill Challenger MM430

Germany

2012

used

on request

INNO30147

Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.

Double Mitre Saw

Mange Jixie MG-841

Germany

2012

used

on request

INNO30146

A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.

Robot

Franka Robotics Panda

Germany

2018

used

on request

INNO30145

Three identical Franka Robotics robots are available. Axes: 7, max. payload: 3kg, max. reach: 855mm, repeatability: +/-0.1mm, max. acceleration: 15m/s², weight: approx. 25kg. Documentation available. An on-site inspection is possible.

Lathe

Weiler MDU 260

Germany

1977

used

on request

INNO30143

A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible.

Network Analyzer

Hp 8753D/3325A

Germany

unknown

used

on request

INNO30142

Several vector network analyzers and one synthesizer-based HP function generator are available. 1) 3x HP 8753D, frequency range: 30kHz-6GHz, option: 006, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 2) 6x HP 8753D, frequency range: 30kHz-3GHz, option: Standard, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 3) HP 3325A, max. frequency range: 21MHz, resolution: 1µHz, max. amplitude: 10V. Machine dimensions X/Y/Z: approx. 450mm/150mm/450mm, weight: approx. 15kg. All devices were calibrated in 2019. Documentation available. On-site inspection possible.

Filling and Capping Line

Alwid Superior 48HV/10PP

Germany

2019

used

on request

INNO30141

A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.

Upright Drilling Machine

Snow TA-3-S/TA-3

Germany

unknown

used

on request

INNO30139

Two similar Snow column drilling machines are available. 1) Snow TA-3, speed: 700rpm, table dimensions X/Y: 460mm/270mm, vertical table adjustment: 255mm, spindle taper: MK1. 2) Snow TA-3-S, speed: 1000rpm, table dimensions X/Y: 460mm/270mm, spindle taper: MK1. An on-site inspection is possible.

Winding Machine

Blume & Redecker AM 100/AM150

Germany

1980

used

on request

INNO30137

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

Mixing System

Khs Paramix CMX 28

Germany

1992

used

on request

INNO30135

A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Empty Bottle Inspection Machine

Heuft InLine II IR/ HBBIP II//

Germany

2013

used

on request

INNO30134

A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

Cold Glue Labeling Machine

Krones Ergomatic

Germany

2011

used

on request

INNO30133

A cold glue labeling machine by Krones is available. Concept: rotary type, label type: cut paper labels, max. label width: 180mm, labeling capacity: approx. 6000 bottles/h, machine dimensions X/Y: approx. 3000mm/3000mm, weight: approx. 3500kg. Documentation available. On-site inspection possible.

Water Jet Cutting Machine

Water Jet Sweden NCH30B

Germany

2017

used

on request

INNO30132

Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible.

CNC Machining Center

Tbi MVC 1890

Germany

2013

used

on request

INNO30131

Travel X/Y/Z: 1800mm/900mm/900mm, table dimensions X/Y: 1950mm/900mm, max. table load: 3000kg, tool holder: SK40, max. spindle speed: 12000rpm, feed rate: 12m/min, repeatability: +/-0.003mm, positioning accuracy: +/-0.005mm, weight: approx. 17000kg, control: Heidenhain. Documentation available. An on-site inspection is possible.

CNC Profile Drilling Machine

Voortman V600

Germany

2007

used

on request

INNO30130

A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible.

Burner

Weishaupt WM-G10/3-A monarch

Germany

2017

used

on request

INNO30128

Fuel: Natural gas, power range: 100kW-1000kW, connection pressure range: 15mbar-500mbar, NOx class: 2. An on-site inspection is possible.

Robot Welding Plant

Kuka KR 15/2

Germany

1998

used

on request

INNO30127

A welding system with a KUKA robot and a rotary device is available. Payload: 15kg, repeatability: ±0.1mm, reach: 1570mm, axes: 6, weight: approx. 225kg. An on-site inspection is possible.

Chamber Furnace

Germany

unknown

used

on request

INNO30126

A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible.