Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [721 - 740 of 2524]

CNC Table Drilling Machine

Tos WHN 10 TNC

Germany

1989

used

on request

INNO28598

Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible.

Hand Screw Press

Metalwag YB-1

Germany

unknown

used

on request

INNO28597

An old Metalwag manual spindle press is available. Pressing force: 10000kg, stand distance: 320mm, stroke: 120mm, balancing diameter: 1200mm, table dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1700mm, weight: approx. 250kg. On-site inspection is possible.

CNC Drilling and Milling Machine

Busch FB 1-150

Germany

1992

used

on request

INNO28595

Travel X/Y/Z: 1000mm/150mm/200mm, table dimensions X/Y: 1300mm/300mm, speed: 6000rpm, tool positions: 8, control: Siemens Sinumerik 810, weight: approx. 3200kg. Coolant system included. Documentation available. On-site inspection is possible.

Single Column Press

Neff T 6.3/EP10

Germany

1989

used

on request

INNO28594

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

CNC Travelling Column Milling Machine

Matec 30 HV

Germany

2003

used

on request

INNO28593

Travel X/Y/Z: 3000mm/800mm/1100mm, rapid traverse X/Y/Z: 30m/min, feed X/Y/Z: 30m/min, spindle type: DMS 112, speed: 12000rpm, power: 30kW, torque: 190Nm, tool holder: HSK 63 A, tool positions: 48. Drilling capacity steel: approx. 60mm, milling capacity: approx. 500cm³, tapping capacity: M30, head tilt: +/-90°, table dimensions X/Y: 3500mm/835mm, face plate diameter: 630mm. Machine dimensions X/Y/Z: approx. 7000mm/6000mm/4000mm, weight: approx. 15000kg, control: Bosch type 3 Osa. Including 70bar internal coolant supply, chip conveyor, loading doors for crane loading, 3D radio measuring probe, direct measuring systems for X/Y/Z, cooling unit and other accessories. Documentation available. On-site inspection is possible.

Drilling Machine

Alzmetall Abomat 30

Germany

1982

used

on request

INNO28592

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

Cylindrical Grinding Machine

Studer RHU 1000/125-DR

Germany

1979

used

on request

INNO28591

Center height: 125mm, center width: 1025mm, longitudinal slide travel: 1020mm, table speed: 5.5m/min, rotary table tilt: 8°, workhead swivel: 90°, speed: 675rpm, 3-jaw chuck diameter: 160mm. Documentation available. On-site inspection is possible.

Band Saw

Mep Shark 281

Germany

unknown

used

on request

INNO28590

Cutting capacity 0°: round material: 250mm, square material: 230mm/230mm, flat material: 280mm/200mm. Cutting capacity 45°: round material: 190mm, square material: 180mm/180mm, flat material: 180mm/180mm. Cutting capacity 60°: round material: 120mm, square material: 110mm/110mm, flat material: 110mm/110mm. Sawing speed: 72m/min, saw blade dimensions X/Y/Z: 2950mm/27mm/0.9mm, weight: approx. 370kg. On-site inspection is possible.

Welding Fume Extraction

Teka Filtercube 4H

Germany

2014

used

on request

INNO28589

Motor power: 7.5kW, air volume flow: 8000m³/h, negative pressure: 4600Pa, filter area: 100m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 800mm/900mm/3200mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

CNC Laser Cutting Machine

Bystronic ByStar Fiber 10kW

Germany

2017

used

on request

INNO28587

Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

Punching Machine

Raster HR 60/700 NL-4S

Germany

1981

used

on request

INNO28585

Press force: 600kN, accuracy: 0.1mm, stroke rate: 300 strokes/min, feed: 150mm, clamping plate dimensions X/Y: 650mm/420mm, opening dimensions X/Y: 550mm/120mm, tool installation height min./max.: 190mm/350mm, weight: approx. 8000kg. Without coil and straightening unit. In continuous operation, the machine switches off after 1-2 strokes. Documentation available. On-site inspection is possible.

Stirring and Whipping Machine

Lips

Germany

unknown

used

on request

INNO27513

A Lips mixer, beater and roller grater is available. Mixer: bowl volume: 40 l, dough hook, mixing blades and whisk. Whipping unit: 2x 4-finger whisks, dough hooks, 5x whisk blades, 6x whisks and 9x bowl (volume: 10l-35l). Roller unit: hopper, round bowl, square stainless steel bowl, scraper and gripper guard. Machine dimensions X/Y/Z: approx. 2350mm/900mm/1350mm, weight: approx. 900kg. Including various accessories. The wood hopper of the roller must be replaced. If required, the gas burners must be retrofitted.

Hardness Testing Machine

Zwick 3202

Germany

1969

used

on request

INNO27522

Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.

Moulder

Bongard Majur Manu

Germany

unknown

used

on request

INNO27512

Dough weight min./max.: 80g/1000g, max. output: 1500 pieces/h, motor power: 0.55kW, loading height: 1360mm, output height: 850mm. Machine dimensions X/Y/Z: approx. 1010mm/850mm/690mm, weight: approx. 132kg. Overhauled: revised, new belts, new felt in infeed hopper and outfeed belt. Documentation available. On-site inspection is possible.

Drill Grinding Machine

Haarmann HSP 50

Germany

1978

used

on request

INNO27511

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

Planetary Mixer

Artofex RG 10

Germany

unknown

used

on request

INNO27506

Two identical Artofex planetary mixers with a total of 7 mixing bowls are available. Stirring capacity: 100l, container volume: 100l/120l, machine dimensions X/Y/Z: approx. 800mm/1550mm/2250mm, weight: approx. 1350kg. Including 6x bowl trolleys, mass whisk, whisk, agitator blades used and new. Machine overhaul: electrics in 2021, mechanics in 2024 and oil change. On-site inspection is possible.

Band Saw

Jaespa Concept 260/630S

Germany

2010

used

on request

INNO28582

Motor power: 4kW, cutting speed: 15m-90m/min, saw blade dimensions X/Y/Z: 5150mm/13mm/0.9mm, saw blade type: M42/4ZpZ, material support height: 720mm, angle: +/-30°, machine dimensions X/Y/Z: approx. 2850mm/1400mm/1850mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Dispensing Cell

Camelot Systems CAM/ALOT System 5000

Germany

1998

used

on request

INNO28581

A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible.

CNC Tool Milling Machine

Mikron WF 31D/TNC355

Germany

1990

used

on request

INNO28580

Travel X/Y/Z: 560mm/500mm/400mm, feed X/Y/Z: 3m/min, table dimensions X/Y: 900mm/530mm, tool holder: ISO40, speed: 4000rpm, machine dimensions X/Y/Z: approx. 2600mm/1800mm/2200mm, weight: approx. 2600kg, control: Heidenhain TNC 355, operating hours: 57765h. Including 3D probe, 20x holders, spray protection cabin and coolant pump. Documentation available. On-site inspection is possible.

CNC Travelling Column Maching Center

Soraluce FL 6000

Germany

2011

used

on request

INNO28578

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.