Used machines Germany - Innovac GmbH

Guillotine Shear

Ed. Paskowsky S.a. ECLAIR ASS 4MM

Germany

1980

used

on request

INNO30403

Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.

more

UV Digital Printing Machine

Durst Tau 330

Germany

2014

used

on request

INNO30402

Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible.

more

Optical Inspection Machine

Göpel OptiCon Basic Line X30

Germany

2009

used

on request

INNO18578

Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013.

more

Stencil Printer

Tws Automation SR3100

Germany

2010

used

on request

INNO30396

Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment.

more

Measuring Device

Man 200KN/9606

Germany

1984

used

on request

INNO30394

Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment.

more

Measuring Device

Amsler Wolpert 40 THZ – 400KN

Germany

1979

used

on request

INNO30392

Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement.

more

Wire Straightening Machine

Germany

1990

used

on request

INNO30390

Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement.

more

Wetbench-System

Robotechnik Europe OPTIwet ST30

Germany

unknown

used

on request

INNO30389

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

more

Rotating Punch Press

Kocher + Beck

Germany

unknown

used

on request

INNO30388

Offered is a Kocher + Beck rotary die cutter/rotary die cutting technology. SKK: scale front stop 5, scale on cylinder 9, 10bar, Mini B (pressure downward): scale front stop 11, scale on cylinder 5, 20bar, Memobox carton: scale front stop 3, scale on cylinder 11, 40bar, Memobox insert: scale front stop 5, scale on cylinder 5 & 2mm, 10bar. Inspection by appointment possible.

more

Metal 3D printing system

Nikon Slm Solutions SLM280 2.0 Single 700W

Germany

2022

used

on request

INNO30386

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement.

more

Coffee Grinder

Mazzer/schärf Stark/XMill-Protect

Germany

unknown

used

on request

INNO30384

A total of 23 Mazzer Luigi/Schärf coffee grinders are available. Grinding system: conical, grinding diameter: 71mm, motor power: 900W, speed: approx. 430rpm. Machine dimensions X/Y/Z: approx. 285mm/820mm/400mm, weight: approx. 25kg. Some grinders come with a separate key that will be provided. One grinder is defective. Documentation vorhanden. An on-site inspection is possible.

more

Infeed Turntable

Seema

Germany

unknown

used

on request

INNO30382

Offered is a feed turntable for bottle infeed/collection table, diameter 1000mm, motor drive clockwise. Viewing is possible by arrangement.

more

Fully Automatic Strapping Machine

Strapex SMA 30

Germany

2016

used

on request

INNO30381

Offered is a fully automatic strapping machine for PP strap, year 2006. The machine has defects. Electronic strap tension control 50-450N, polypropylene (PP) strapping band width: 12mm, core diameter X/Y 200mm/280mm, heat-seal joint, cycle performance 30 strappings/min, package dimensions X/Y: min approx. 100mm/30mm, machine dimensions X/Y: 1450mm/600mm, working height: 800mm, weight: approx. 220kg. Inspection possible by arrangement.

more

Plate Filter

Seitz Orion 60A-100

Germany

1988

used

on request

INNO30380

A sheet filter (EK filter) Seitz Orion is available. Plate dimensions X/Y: 600mm/600mm, number of plates: 80, filter area: approx. 22m², filtration capacity: 45hl/h, connection: DN50. Machine dimensions X/Y/Z: approx. 3300mm/1000mm/1500mm, weight: approx. 1250kg. An on site inspection is possible.

more

Carton Packaging Machine

Uhlmann C130

Germany

2001

used

on request

INNO30377

A horizontal, intermittently operating cartoning machine Uhlmann is available. Pitch: 5inch, closure types tuck-in flaps/hot glue, cartoning output: approx. 12-150 folding cartons/min, min. format dimensions X/Y/Z: 70mm/30mm/15mm, max. format dimensions X/Y/Z: 150mm/100mm/85mm. Machine dimensions X/Y/Z: approx. 1500mm/3100mm/900mm, weight: approx. 1000kg, control: Siemens HMI. The control of the machine is defective. Documentation vorhanden. An on-site inspection is possible.

more

Stretchwrapper

Pester Pac Pewo-pack 250 K

Germany

2000

used

on request

INNO30376

A fully automatic Pester Pac strapping banding machine for folding boxes is available. Unit output: 40/min, min. carton dimensions X/Y/Z: 30mm/15mm/60mm, max. carton dimensions X/Y/Z: 150mm/90mm/180mm, min. bundle dimensions X/Y/Z: 60mm/30mm/60mm, max. bundle dimensions X/Y/Z: 360mm/180mm/250mm. Film width range: 50mm-250mm, film thickness range: 25m-80µm, max. film roll diameter: 300mm, max. insertion dimensions X/Y/Z: 180mm/400mm/200mm, max. sealing width: 250mm. Machine dimensions X/Y/Z: approx. 2100mm/1100mm/2100mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

more

Cartoner

Uhlmann C130

Germany

2000

used

on request

INNO30375

A horizontal, intermittently operating cartoning machine Uhlmann is available. Pitch: 5inch, closing types tuck-in flaps/hot glue, cartoning output: 12-150cartons/min, min. format dimensions X/Y/Z: 70mm/30mm/15mm, max. format dimensions X/Y/Z: 150mm/100mm/85mm. Machine dimensions X/Y/Z: approx. 1500mm/3100mm/900mm, weight: approx. 1000kg. Dokumentation vorhanden. A visit on site is possible.

more

Milling machine

Maho MH 800

Germany

unknown

used

on request

INNO30374

Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment.

more

Blister Packaging Machine

Uhlmann UPS 600/106

Germany

2000

used

on request

INNO30373

A Uhlmann blister machine including new Scanware for fill-good inspection Spectra CL is available. Index length: 160mm, max. forming capacity: 80cycles/min, packaging capacity: 240blisters/min, forming film materials: plastics/aluminium, lidding film materials: composite films/aluminium, max. forming depth: 25mm, max. film width: 300mm, film core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 6500kg. Including a defective HAPA 216 blister printer. Dokumentation vorhanden. An on-site inspection is possible.

more

Vertical Milling Machine

Deckel Typ FP4NC

Germany

1987

used

on request

INNO30372

Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.

more