Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [501 - 520 of 2648]

Central Winding Machine

Euromac CB 500S

Germany

2018

used

on request

INNO30187

A Euromac doctor rewinder for unwinding and rewinding web materials on rolls is available. Web width: 450mm, max. speed: 400m/min, materials: paper/aluminum/composite materials, material thickness range: 30µm-100µm, max. parent roll diameter: 520mm, max. roll weight: 100kg, max. rewind diameter: 520mm, max. core/adapter inner diameter: 76mm/120mm. Including Häwa water cooling, floor scanner, and side safety fence. Documentation available. An on-site inspection is possible.

Chiller

Daikin EWQ009ACW1P

Germany

2010

used

on request

INNO30186

A small Daikin chiller with inverter is available. Refrigerant: R410A, refrigerant charge: 2.95kg, max. operating pressure high/low side: 4MPa/3MPa, max. water pressure: 3bar, weight: approx. 180kg. Documentation available. An on-site inspection is possible.

Refrigerating plant

Hyfra Alpha 34-2-W-S

Germany

2021

used

on request

INNO30185

Two identical Hyfra refrigeration units are available. Cooling capacity: 25kW, refrigerant: R410A, refrigerant charge: 4kg, max. operating pressure: 42bar, medium: water, pumps process/standard: 2/2, pump type: CM3-4/CM5-5. Machine dimensions X/Y/Z: approx. 1650mm/750mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Chiller

Ers SC 22.0 VS

Germany

2014

used

on request

INNO30184

A refrigeration unit ERS is available. Refrigerant: R407C, refrigerant quantity: 13kg, heat inlet/outlet temperature: 15°C/20°C, cooling capacity: 25580W, tank volume: 360l, pump capacity at 390kPa: 4.4m³/h, max. operating pressure low/high: 22bar/29bar. Machine dimensions: approx. 1650mm/900mm/2000mm, weight: approx. 930kg. Documentation available. An on-site inspection is possible.

Projetion Welding Machine

Dalex PMS 32-5

Germany

2012

used

on request

INNO30183

A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible.

Sleeving Line

Berning BS

Germany

2018

used

on request

INNO30181

A complete Berning sleeve packaging line for the automated labeling and packaging of bottles or cups in shrink sleeves is available. 1) Berning Maschinenbau sleeve machine, year of manufacture: 2018, cycle rate: 100cycles/min, max. product passage height: 320mm, product width range: 10mm–190mm, operating hours: approx. 3562h. 2) Franz Tölke bottle unscrambler, year of manufacture: 2018, output capacity: 240pieces/min. Includes aligner and cup inserter. 3) Ropack counting unit with automatic carton changer. Documentation available. An on-site inspection is possible.

Stretchwrapper

Pester Pac PEWO-pack Therm 450/Compact 450

Germany

2009

used

on request

INNO30180

A banding machine Pester-Pac is available. Working height range: 900mm-950mm, capacity: 25cycles/min, bottom carton infeed conveyor length: 3000mm, max. product height: 195mm, max. product diameter: 48mm, max. product dimensions X/Y: 41mm/66mm. Machine dimensions X/Y: approx. 4950mm/2450mm, weight: approx. 2200kg, operating hours: 2744h. Documentation available. On-site inspection possible.

Steam Boiler

Jumag DG260

Germany

2017

used

on request

INNO30179

A Jumag steam generator including burner is available. Volume: 45l, max. operating pressure: 13bar, max. test pressure: 23bar, max. temperature: 220°C, heating capacity: 175kW. Weight: approx. 810kg, boiler hours: 3013h, burner hours: 2652h. Documentation available. On-site inspection is possible.

CNC Cycle Lathe

Microcut Challenger BNC

Germany

unknown

used

on request

INNO30178

A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.

CNC Lathe

Style 650/3000

Germany

unknown

used

on request

INNO30177

Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible.

Ultrasonic Welding Machine

Rinco UGH70-100P-230

Germany

unknown

used

on request

INNO28223

A small Rinco ultrasonic welder is available. Frequency: 70kHz, peak power: 120W, continuous operating power: 100W, generator dimensions X/Y/Z: 424mm/148mm/282mm, hand welder length and diameter: 163mm/48mm, operating temperature: 10°C-50°C, storage temperature: -20°C to +70°C, protective measures: Short circuit/overload/overtemperature protection, Weight: approx. 12kg. Documentation available. On-site inspection is possible.

Rheometer

Alpha Technologies RPA 2000

Germany

unknown

used

on request

INNO30176

An Alpha rubber process analyzer for testing the rheological and dynamic properties of elastomers and rubber compounds is available. Frequency range: 0.1-3000cpm, max. temperature: 230°C, max. heating rate: 1°C/s, max. cooling rate: 0.5°C/s, max. strain: +/-90°, test standards: ASTM D5289/D6048/D6204/D6601/D7050/D7605/D8059. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Including PC with Eclipse software and spare parts. Documentation available. On-site inspection possible.

Mooney Viscometer

Alpha Technologies MV2000

Germany

unknown

used

on request

INNO30175

An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.

Rheometer

Alpha Technologies MDR 2000

Germany

unknown

used

on request

INNO30174

A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.

CNC Machining Center

Chiron Mill 2000 350-10

Germany

2013

used

on request

INNO30172

Travel X/Y/Z: 2000mm/610mm/630mm, tool holder: SK40, spindle speed: 9000rpm, tool stations: 40, rapid traverse: 60m/min, table dimensions X/Y: 2100mm/720mm, max. table load: 1000kg. Control: Siemens Sinumerik 840D, operating hours: 18272h. Including conveyor and coolant system. Documentation available. An on-site inspection is possible.

CNC Vertical Machining Center

Dmg DMC 1035 V eco

Germany

2009

used

on request

INNO30171

Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible.

CNC Lathe

Dmg NEF 600

Germany

2011

used

on request

INNO30170

Swing diameter over bed/cross slide: 600mm/410mm, turning length: 1190mm, travel X/Z: 320mm/1250mm, speed: 3000rpm, spindle bore: 75mm, torque: 785Nm, tailstock taper: MK5, tool stations: 8, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5500kg, control: Siemens Sinumerik 840D powerline, operating hours: 22407h. Including conveyor and chip breaker. Documentation available. An on-site inspection is possible.

Filter Centrifuge

Alfa Naval IFB 303X-73

Germany

2001

used

on request

INNO30169

An Alfa Naval disc stack centrifuge module for separating foreign oil from water-based coolants is available. Speed: 7500rpm, throughput with water-based coolant: approx. 480l/h, max. medium temperature: 70°C. Machine dimensions X/Y/Z: approx. 650mm/550mm/1200mm, weight: approx. 60kg. An on-site inspection is possible.

Injection Moulding Machine

Arburg/demag/engel 270M/420C/370C/320M/viva/ES

Germany

2003

used

on request

INNO30168

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible.

Injection Moulding Machine

Arburg Allrounder 375 V 500-100

Germany

2016

used

on request

INNO30167

An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.