Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [441 - 460 of 2716]

Dough Mixer

Eberhardt Universal C

Germany

2008

used

on request

INNO30544

A round and long moulding machine Eberhardt is available. Moulding length: 1450mm, dough piece weight range: 150g-1500g, moulding capacity: approx. 650-1000pieces/h, machine weight: approx. 650kg. Including additional moulding bell (650g-1750g) and touch panel control. Documentation available. An on-site inspection is possible.

Bread Roll Press

Twa Erika Record Automat

Germany

1996

used

on request

INNO30543

A bread roll machine TWA Erika is available. Dough system range: 750g-2550g, product weight range: 20g-85g, machine dimensions X/Y/Z: approx. 700mm/600mm/1700mm. Including three rounding plates. An on-site inspection is possible.

Remaining Stock

Bwt/weishaupt Bewados/L1Z-B

Germany

2008

used

on request

INNO30542

Some small equipment is available. 1) Water treatment system BWT, year of manufacture: 2006, tanks: 2, max. operating pressure: 10bar, max. test pressure: 11bar, max. operating temperature: 50°C, volume: 48l, control system: BWT Soft-Control II. 2) Weishaupt burner L1Z-B, year of manufacture: 2008, power range: 70kW-415kW. 3) Wet cooler. An on-site inspection is possible.

CNC Machining Center

Dmg Mori DMC 835 V

Germany

unknown

used

on request

INNO30541

A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.

Universal Dishwasher

Hobart UXLS-11

Germany

2008

used

on request

INNO30540

A universal commercial dishwasher Hobart is available. Basket inner dimensions X/Y: 570mm/675mm, machine dimensions X/Y/Z: approx. 800mm/950mm/2050mm, weight: approx. 200kg. On-site inspection is possible.

Dough Rolling Machine

Fritsch Rollfix 3WK/630

Germany

1991

used

on request

INNO30539

Working width: 630mm, table length: 1600mm, max. dough belt thickness: 30mm, machine dimensions X/Y/Z: approx. 2250mm/1200mm/1200mm, weight: approx. 250kg. On-site inspection is possible.

Pancake Machine

Jufeba WW-GW 10

Germany

2002

used

on request

INNO30538

A Jufeba pancake machine is available. Tilting troughs: 10, trough capacity: 48, output: approx. 480pcs/h, grease pan internal dimensions X/Y: 580mm/780mm. Machine dimensions X/Y/Z: approx. 1250mm/850mm/1250mm, weight: approx. 250kg. An on-site inspection is possible.

Dough Kneading Machine

Eberhardt Maximat N80

Germany

1996

used

on request

INNO30536

Kneading capacity dough/flour: approx. 80kg/50kg, bowl capacity: 120l, machine dimensions X/Y/Z: approx. 1600mm/700mm/1200mm, weight: approx. 500kg. Including stainless steel bowl. The control system was renewed in the year 2022. Documentation available. An on-site inspection is possible.

CNC Machining Center

Deckel-maho DMU 80 T

Germany

1998

used

on request

INNO30535

A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.

Silo

Cepi Mehl

Germany

2009

used

on request

INNO30534

A Cepi flour silo is available. Containers: 2. Container capacity 1: 4000kg, container capacity 2: 4500kg. Including electrical control and weighing hopper. Documentation available. An on-site inspection is possible.

Bread Roll Machine

Eberhardt Primo-Star/Mono-Star/Vario-Star-S

Germany

1989

used

on request

INNO30533

An Eberhardt bread roll line is available. Head machine: Primo-Star, depositor: Mono-Star, rounding unit: Vario-Star-S, production capacity: approx. 4000 rolls/h, product weight range: 20g-85g, line length: approx. 2750mm. An on-site inspection is possible.

Wagon Oven

Werner & Pfleiderer Green Line REC Green II

Germany

2023

used

on request

INNO30532

A recirculating rack oven WP is available. Tray dimensions X/Y: 600mm/800mm, max. rack trolley diagonal: 1070mm, max. rack trolley height: 1800mm, baking area: 10m², max. tray load: 350kg. Machine dimensions X/Y/Z: approx. 1550mm/1650mm/2550mm, weight: approx. 2000kg, controls: Navigo 3. Documentation available. An on-site inspection is possible.

Multi-Deck Oven

Werner & Pfleiderer Matador MD 125 C 52

Germany

2003

used

on request

INNO30531

Baking area: 12m², decks: 5, deck dimensions X/Y: 1200mm/2000mm, loading guideline with 1kg bread: 30x5, heating type: oil, heating capacity: 90kW, version: Combitherm. Machine dimensions X/Y/Z: approx. 1900mm/3100mm/2450mm, weight: approx. 3000kg. Including lifting table. Documentation available. On-site inspection is possible.

Multi-Deck Oven

Miwe Ideal 4000/4

Germany

1993

used

on request

INNO30530

A Miwe deck oven is available. Decks: 4, heating type: oil, heating circuits: 2, usable baking area: approx. 8m², oven width: 1200mm, oven depth: 1600mm, max. temperature: 300°C, machine dimensions X/Y/Z: approx. 1600mm/3350mm/2350mm, weight: approx. 2000kg. Including lifting table Unimetall SH 101. An on-site inspection is possible.

Compressor

Atlas Copco/schneider/donaldson GA 18/DK 3000 N/Ultrasep plus 30

Germany

1994

used

on request

INNO30529

A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

Water Jet Cutting Machine

Soitaab Thesis 2040

Germany

2014

used

on request

INNO30528

A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.

Glass Rail Saw

Striffler 2733

Germany

unknown

used

on request

INNO30527

A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible.

Universal Tool Milling Machine

Wmw FUW 315/III

Germany

1981

used

on request

INNO30526

Travel X/Y/Z: 500mm/280mm/330mm, table dimensions X/Y: 710mm/400mm, max. table load: 150kg, speed: 1800rpm, tool holder: SK40, feed rate: 1250mm/min, milling head swivel: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/2200mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.

CNC Machining Center

Mazak VTC-800/30SR

Germany

2015

used

on request

INNO30524

A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.

Shaping Machine

Hahndorf REWK 86/14

Germany

2007

used

on request

INNO30522

A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible.