Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [421 - 440 of 2599]

Twin Screw Extruders

Weber CE5K

Germany

1989

used

on request

INNO29411

A conical twin-screw extruder Weber for PVC profile extrusion including cooling water basin, pull-out machine and a saw is available. Extrusion capacity: approx. 90kg/h, drive: 30kW, injection height: 100mm, temperature range: 0°C-300°C, motor power: approx. 20kW, controller: Philips Pastomatic, weight: approx. 1000kg. Documentation available. On-site inspection is possible.

Binding Machine

Horizon Perfect Binder BQ-270

Germany

2006

used

on request

INNO29410

A Horizon binder is available. Book block thickness range: 1mm-50mm, min. book format: 135mm/105mm, max. book format: 320mm/320mm, min. cover format: 135mm/230mm, max. cover format: 320mm/660mm, paper thickness range: 80g-300g/m², max. cover stack height: 70mm, trimming depth: 0mm-3mm, output: 500 cycles/h. Machine dimensions X/Y/Z: approx. 2300mm/900mm/1250mm, weight: approx. 900kg, counter reading: 358000. An on-site inspection is possible.

Glass Frame Saw

Schüco PGZ 45 90

Germany

2004

used

on request

INNO29409

A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible.

Centerless Grinding Machine

Herminghausen SR 3

Germany

1994

used

on request

INNO29408

Workpiece diameter min./max.: 1mm/100mm, max. grinding length through-feed grinding/penetration grinding: 300mm/180mm, grinding wheel dimensions: 400mm/180mm/203mm, wheel wear grinding wheel/control wheel: 100mm/80mm, speed: 600rpm. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Krauss-maffei KM 1300-12000 MC

Germany

2002

used

on request

INNO29407

A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026.

Injection Moulding Machine

Ferromatik E100

Germany

1995

used

on request

INNO29406

A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.

Screen Printing Line

Tic SFM-800E

Germany

unknown

used

on request

INNO29403

A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible.

Bead Mill

Carl Kurt Walther

Germany

unknown

used

on request

INNO29401

An old rectangular ball mill for barrel and dip finishing of mass-produced articles is available. Process: Deslagging/deburring, filling weight range: approx. 30kg-50kg, drive: belt-driven, machine length: approx. 1200mm. On-site inspection is possible.

Pellet Press

La Meccanica CLM 630 N RB

Germany

2002

used

on request

INNO29400

A horizontal La Meccanica pellet press for animal feed, wood pellets or cellulose-containing products without motor and sensors is available. Production capacity chicken feed: approx. 8t-12t/h, production capacity turkey feed: approx. 4t-8t/h, die inner diameter: 630mm, working width: 240mm, machine dimensions X/Y/Z: approx. 2500mm/3500mm/2500mm, weight: approx. 6500kg, operating hours (estimated): approx. 130000h. Documentation available. On-site inspection is possible.

Airpad Machine

Fromm AP 502

Germany

2012

used

on request

INNO29398

Output: 25-49 cycles/min, film material: PA/PE composite film or polyethylene film, cushion length range: 40mm-160mm, film width range: 420mm/767mm, max. roll diameter: 280mm, machine dimensions X/Y/Z: approx. 1600mm/800mm/1300mm, weight: approx. 230kg. Documentation available. On-site inspection is possible.

Labelling Machine

Gm DC 330

Germany

unknown

used

on request

INNO29395

A Grafisk Maskinfabrik roll-fed labeling machine with integrated printing system is available. Web width: 330mm, web speed: 100m/min, rewind reel min./max.: 25mm/73mm, substrate thickness min./max.: 40g/300g/m², torque: 10Nm-100Nm, max. reel diameter: 250mm, machine weight: approx. 1300kg. Documentation available. On-site inspection is possible.

Motor

Weg 37kW 2P 200M/L WFX2

Germany

2021

used

on request

INNO29391

An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible.

Robot

Stäubli TX60

Germany

2017

used

on request

INNO29390

Two Stäubli robots including control units are available. 1) 2x Stäubli TX60 robots, year of manufacture: 2017, axes: 6, load capacity: 3.5kg, reach: 670mm, repeat accuracy: +/-0.02mm, weight: approx. 50kg, operating hours 1/2: approx. 46000h/52000h. 2) 2x Stäubli CS8C-TX60 controller, year of manufacture: 2017, documentation available. On-site inspection is possible.

Robot

Stäubli RX160L

Germany

2017

used

on request

INNO29389

Two Stäubli robots including controller and stand are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, payload nominal/maximum: 14kg/28kg, reach: 2010mm, repeat accuracy: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation available. On-site inspection is possible.

Center Lathe

Pinacho L-1/180

Germany

1990

used

on request

INNO29388

Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.

Wire Drawing Plant

Niehoff MZE 201.16.1.A

Germany

unknown

used

on request

INNO29387

A Niehoff multiple drawing machine is available. Graduations: 21% DV, wire draws: 21/wire. Drawing cone pairs: 16, drawing cone diameters: 200mm/139mm/96.5mm/67mm/46.5mm, drawing wheels: 8, wires per operating side: 4. Machine dimensions X/Y/Z: approx. 2050mm/2500mm/2250mm, weight: approx. 5800kg. Documentation available. On-site inspection is possible.

Wire Drawing Plant

Niehoff MZE 201.16.1.A

Germany

unknown

used

on request

INNO29386

A Niehoff multiple drawing machine is available. Graduations: 21% DV, wire draws: 21/wire, wire material: copper, max. wire inlet diameter: 2mm, wire outlet diameter min./max.: 0.15mm/0.4mm, max. drawing speed: 25m/s, motor power: 150kW, max. drawing die diameter: 28mm, max. drawing die length: 22mm. Drawing cone pairs: 16, drawing cone diameters: 200mm/139mm/96.5mm/67mm/46.5mm, drawing wheels: 8, wires per operating side: 4. Machine dimensions X/Y/Z: approx. 2050mm/2500mm/2250mm, weight: approx. 5800kg. Documentation available. On-site inspection is possible.

Bar Loader Magazine

Breuning Irco ILS RBK 10012

Germany

2005

used

on request

INNO29385

Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.

Honing Machine

Nagel VA 2-100

Germany

unknown

used

on request

INNO29384

Working diameter min./max.: 25mm/250mm, max. honing length: 800mm, speed: 50U-250U/min, vertical stroke: 40mm-1000mm, stroke speed: 12m/min, throat depth: 870mm, tool holder: MK4, table: fixed table. Machine dimensions X/Y/Z: approx. 2650mm/1400mm/3000mm, weight: approx. 2000kg. Including coolant system with 100l tank. Documentation available. On-site inspection is possible. Expected to be available from December 2025.

Circular Mitre Saw

Kaltenbach/adige SC 425

Germany

unknown

used

on request

INNO29383

A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible.