Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [301 - 320 of 2462]

Spring Coiling Machine

Schenker 15E

Germany

1995

used

on request

INNO28783

A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple lifting device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, outer spring diameter: 2mm-30mm, connected load: 3.1kW, production output: 400 springs/min, machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible.

Fork Lift

Mitsubishi FG20NT

Germany

2019

used

on request

INNO28782

Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible.

Semi Automatic Strapping Machine

Mosca MOM-8

Germany

unknown

used

on request

INNO28781

Several Mosca strapping machines are available. Table dimensions X/Y: 980mm/540mm, working height: 820mm/900mm, strapping: polypropylene (PP), strap width: 5mm/8mm/12mm, strap thickness: 0.4mm/0.8mm, strap coil core diameter: 200mm, core width: 190mm, weight: approx. 120kg. Documentation available. On-site inspection is possible.

Refrigerant Dryer

Kaeser TB 26

Germany

2007

used

on request

INNO28780

Air volume flow: 2.55m³/min, pressure dew point: 3°C, operating pressure: 16bar, refrigerant: R134a, refrigerant capacity: 670g. Documentation available. On-site inspection is possible.

CO2 Laser Cutting Machine

Amada LC-2415 Alpha II/Resonator C-1500

Germany

1998

used

on request

INNO28779

Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Stork N-2500-1400

Germany

2005

used

on request

INNO28778

Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible.

Powder Coating Plant

Itw Gema MagicCenter

Germany

2010

used

on request

INNO28777

A complete and automated ITW Gema powder coating system is available. Baffle plate diameter: 16mm/24mm/32mm, powder hose inner diameter: 11mm, cable length: 6000mm. Positioning accuracy: +/-5mm, lifting speed: 0.6m/s, max. load: 50kg, max. cable length: 20m, lifting device dimensions X/Y/Z: approx. 460mm/750mm/2900mm. Travel distance: 1400mm, height allowance: 227mm, air consumption: 1400m³/h. Components: 1) ITW Gema powder coating unit 10P, ITW Gema axis system, ITW Gema control unit, ITW Gema MagicCenter. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Arburg Allrounder 520C 2000-675

Germany

1998

used

on request

INNO28776

Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

CNC Universal Milling Machine

Maho MH 1000 C

Germany

1984

used

on request

INNO28775

A Maho CNC universal tool milling machine is available. Travel X/Y/Z: 1000mm/560mm/800mm, table dimensions X/Y: 1150mm/800mm, tool holder: ISO50, speed: 2000rpm, feed: 3m/min, rapid traverse: 6m/min, max. table load: 800kg. Machine dimensions X/Y/Z: approx. 4600mm/2300mm/3000mm, weight: approx. 7500kg. The control system was overhauled and renewed in 2007. An on-site inspection is possible.

Retracting Belt

Verbufa

Germany

unknown

used

on request

INNO28774

A VSB Verbufa for the positioning of minced meat, hamburgers, cookies, balls and sticks with high cycle output in packaging and packaging machines is available. Output: 110 portions/min, machine dimensions X/Y/Z: approx. 1700mm/950mm/1650mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Slicer

Holac Sect

Germany

unknown

used

on request

INNO28773

A Holac cutting machine for the food industry is available. Magazine cross-section X/Y: 225mm/230mm, insertion length: 740mm, cut-off length range: 1mm/165mm, cutting capacity: 93/186 cuts/min (372 cuts with S-knife), belt speed range: 3.5m/min/33mm/min, machine weight: approx. 600kg. Documentation available. On-site inspection is possible.

Buffer Stand

Intray Smart Buffer

Germany

unknown

used

on request

INNO28772

A Smart Buffer Stand (destacker) Intray for tray packaging is available. Tray dimensions X/Y: 325mm/265mm, max. tray stack height: 500mm, lifting fittings: 4, belt width: 500mm, machine width: 770mm. Documentation available. On-site inspection is possible.

Agitator Vessel

Germany

unknown

used

on request

INNO28771

A total of 4 storage tanks with integrated agitator are available. Volume: approx. 2800l, stirring capacity: 2kW. On-site inspection is possible.

Cutting Table

Asco PS 50

Germany

2010

used

on request

INNO28770

Working height: 900mm (+/-50mm), max. roll weight: 70kg, max. roll width: 3200mm, cutting width: 3900mm/5000mm, cutting length: 5000mm, cutting speed: 1m/s, machine dimensions X/Y: approx. 7000mm/4500mm. Documentation available. On-site inspection is possible.

Universal Milling Machine

Correa F 2 UE

Germany

1980

used

on request

INNO28769

Travel X/Y/Z: 440mm/1200mm, table dimensions X/Y: 440mm/1200mm, spindle mount: ISA 40, speed: 1800rpm, feed X/Y: 630mm/min, feed Z: 224mm/min, machine dimensions X/Y/Z: approx. 2150mm/2000mm/2100mm, weight: approx. 2400kg. Documentation available. On-site inspection is possible.

Smelting Furnace

Rauch ZSO 700 B

Germany

1995

used

on request

INNO28768

A smoke melting system is available. Components: Furnace, conveyor belt, electric stacker, melting container, ingot casting belt. Total plant dimensions X/Y/Z: approx. 6000mm/3500mm/3800mm, total plant weight: approx. 4500kg. Documentation available. On-site inspection is possible.

CNC Tool Grinding Machine

Schütte WU405

Germany

1999

used

on request

INNO28767

Travel X/Y/Z: 540mm/280mm/260mm, W-axis: 360°, A-axis: 330°, speed: 12000rpm, tool holder: HSK 50E, sanding length: 500mm, sanding diameter: 300mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D. Including a new spindle and a paper belt filter Polo SB-A0.4-0600, year of manufacture: 1998, flow rate: 220l/min. Documentation available. On-site inspection is possible.

Powder Mixing Plant

Georg Stein

Germany

2004

used

on request

INNO28766

A powder mixing machine including weighing system, filter unit and all necessary equipment is available. Screw capacity: 5.3m³/h, length: 1000mm, inlet diameter: 250mm, outlet diameter: 120mm, power: 1.5kW. Sartorius scales, weighing range: 0kg/10kg, numerals: 2g. Filter unit Dustjet FPHTU07, filter area: 6m². Fan capacity: approx. 2000m³/h, cylinder height: 1450mm, cylinder diameter: 840mm, cylinder volume: approx. 0.8m³. Documentation available. On-site inspection is possible.

Dry Kiln

Vötsch VTL 125/200

Germany

2006

used

on request

INNO28765

Internal dimensions X/Y/Z: 1250mm/2000mm/1250mm, useful chamber volume: 3.215m³, nominal temperature: 250°C, minimum exhaust air flow: 480m³/h, connected load: 40kW, machine dimensions X/Y/Z: approx. 2200mm/3050mm/1700mm, weight: approx. 1150kg. Documentation available. On-site inspection is possible.

Screen Printing Machine

Svecia SPC

Germany

1987

used

on request

INNO28764

Print dimensions X/Y: 880mm/1250mm, max. material thickness: 5mm, max. material weight: 3000g/m², max. frame dimensions X/Y: 1350mm/1590mm, max. frame profile height: 50mm, fine register adjustment: +/-16mm. Gripper edge: 4mm, squeegee and flood speed: 1.5m/s, squeegee angle adjustment: 60°/90°, cycle speed: 1050 cycles/h, infeed height: 965mm, outfeed height: 780mm, machine weight: approx. 800kg. On-site inspection is possible.