Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1981 - 2000 of 3074]

Destacker

Nutek NTM 220 DSXL-FW

Germany

2007

used

on request

INNO29122

A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Water Cooling Machine

Hyfra VWK 50/1-S

Germany

2005

used

on request

INNO29119

A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.

CNC Woodworking Machines

Cms Avant

Germany

1999

used

on request

INNO29117

A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.

Reach Truck

Gangcha CQDB16

Germany

2023

used

on request

INNO29115

Load capacity: 1600kg, load center: 500mm, drive: electric, mast: Triplex, lifting height: 3600mm, fork length: 1200mm, fork carriage width: 902mm, turning radius: 1800mm, machine dimensions X/Y: approx. 2450mm/1050mm, operating hours: 62h. Documentation available. On-site inspection is possible.

Vacuum Pump

Rietschle Twister VSB 120

Germany

2006

used

on request

INNO29114

Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.

Mandrel Bending Machine

Transfluid DB2060BK

Germany

2017

used

on request

INNO29111

Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Glueing Machine

Barberan MEN-H-1600

Germany

2017

used

on request

INNO29103

A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible.

Profile Projector

Mitutoyo/nikon PJ321F/V-12

Germany

unknown

used

on request

INNO29093

Two old Mitutoyo and Nikon projectors are available. 1) Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. 2) Nikon V-12, projection screen: 305mm, rotation range: 360°, lens compatibility: 10x/20x/50x/100x, resolution: +/-0.1%, max. workpiece height: 100mm, weight: approx. 80kg. On-site inspection is possible.

Table Trolley

Germany

unknown

used

on request

INNO29092

A total of 37 table trolleys are available. On-site viewing is possible.

Boxmaker

Solarco BMC 17 DCP

Germany

2008

used

on request

INNO29089

A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Screen Printing Machine

Kammann K15R (4.15.09)

Germany

1998

used

on request

INNO29086

A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.

Placement System

I-pulse (yamaha) M20

Germany

2012

used

on request

INNO29080

An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible.

High-Bay Warehouse

Stopa

Germany

2005

used

on request

INNO29079

A Stopa heavy-duty high-bay racking system for panel storage is available. Total loading capacity: 51t, storage units: 17, max. storage unit load: 3t, max. panel dimensions X/Y: 1525mm/4050mm. Documentation available. On-site inspection is possible.

Servo Motor

Siemens Simotics M-1 PH8

Germany

unknown

used

on request

INNO29077

Axle height: 80mm, power: 5.4kW, torque: 22.4Nm, speed: 2300rpm, moment of inertia: 98.3kg/cm², weight: approx. 50kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

Servo Motor

Siemens Simotics M-1 PH8

Germany

unknown

used

on request

INNO29072

An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

CNC Punch Laser Machine

Trumpf Trumatic 600L

Germany

1995

used

on request

INNO29071

A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.

CNC Lathe

Pinacho Smart Turn 6/180-100

Germany

2006

used

on request

INNO29067

A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible

Blast System

Gutmann 1250

Germany

1995

used

on request

INNO29066

A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible.

Hardening Oven

Stahlmann Schienen-Härteofen

Germany

2018

used

on request

INNO29065

A rail hardening furnace for the production of shears is available. Working length: 3400mm, heating zones: 2, heating power: 34kW, useful space separation: SiC plates, temperature-controlled zones: 2, conveying direction: free, machine dimensions X/Y/Z: approx. 4000mm/1250mm/2100mm. Including automatic conveyor system and separate blower. Documentation available. On-site inspection is possible.

Panel Saw

Holz-her Super Cut 1215

Germany

unknown

used

on request

INNO29063

A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.