Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1401 - 1420 of 3028]

Blasting System

Agtos

Germany

2018

used

on request

INNO30205

Components: control cabinets, machine body (cabin, turbines, outlet, inlet), platform with processing unit and bunker, sound insulation cabin, impact box, bucket elevator, gratings, ladder, pre-impact box, small parts, piping, cable ducts, blasting media and refill silo, compressed air connection: 1/2 inch at 4–6bar, compressed air consumption: approx. 1.5m³/h, processed according to DIN ISO 8573-1, solid particle size: 1µm, density: 1mg/m³, water content: pressure dew point 3°C, oil content: 1mg/m³, length: 11,000mm, height: 5907mm. An on-site inspection is possible.

Center Lathe

Graziano sag 210

Germany

1980

used

on request

INNO30202

Center height: 210mm, distance between centers: 1500mm, swing over bed: 420mm, spindle bore: 57mm, speed range: 38–2000/min, main drive: 7.5kW, weight: 2t. Equipment: 3-jaw chuck, tailstock, steady rest, quick-change tool holder, coolant system, lighting, year of manufacture: approx. 1980–1985. No data sheet, fully functional, well maintained, ready for immediate use. Only slight oil moisture in the lower area due to age, without relevant oil loss. An on-site inspection is possible.

Needle Loom

Dilo UD-II/25

Germany

1978

used

on request

INNO30201

Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible.

Band Saw

Kasto KASTOtwin A2

Germany

2005

used

on request

INNO30200

A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment.

Cap Removing Machine

Krones

Germany

1999

used

on request

INNO30196

A Krones cap remover from a complete filling line is available. Total line capacity: 30000bottles/h, container volume range: 500ml-1000ml, container types: Euro/GDB long-neck/NRW/GDB bulb-neck/GDB mineral water/Gastro/Gourmet SV/GDB N2 SV. Documentation available. On-site inspection possible. Only the cap remover, not the complete line, is offered.

Compressor

Blitz Monsun 22

Germany

2001

used

on request

INNO30195

Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Roller Coater

Bürkle e.a.sy-Coater RCL-M 700

Germany

2016

used

on request

INNO30194

A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible.

Belt Conveyor

Technipes

Germany

unknown

used

on request

INNO30193

A Technipes conveyor belt from a mill is available. Belt width: 500mm, width: 600mm, length: approx. 3500mm. Machine dimensions: approx. 600mm/3500mm. An on-site inspection is possible.

Storage Tank

C. F. Maier KK

Germany

2004

used

on request

INNO30192

Various barrels are available. 1) 12x as-new Speidel barrels with accessories. 2) 3x stackable tanks C. F. Maier KK, year of manufacture: 2004, capacity: 650l. An on-site inspection is possible.

Traysealer

Mondini Trave 340 VG

Germany

2012

used

on request

INNO30191

A tray packaging machine Monidin is available. Tray dimensions X/Y: 340mm/280mm, film width: 270mm, performance: 4-5 cycles/min, vacuum pump: Busch R5, pump capacity: 300m³/h, material: stainless steel, packaging type: MAP (Modified Atmosphere Packaging). Machine dimensions X/Y/Z: approx. 3300mm/900mm/2000mm, control: Siemens PLC. Tooling equipment: 2-impression MAP tool for 1825 trays (250mm/180mm) and 1-impression MAP tool for 2427 trays (240mm/270mm). Documentation available. An on-site inspection is possible.

Traysealer

Sealpac SP 750

Germany

unknown

used

on request

INNO30190

Tray dimensions X/Y 1: 250mm/180mm, tray dimensions X/Y 2: 357mm/265mm, max. film width: 400mm, packaging output: approx. 6–8 cycles/min. Machine dimensions X/Y/Z: approx. 5000mm/900mm/2000mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Hydraulic Double-Sided Press

Weingarten HQR 315

Germany

1994

used

on request

INNO30188

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

Central Winding Machine

Euromac CB 500S

Germany

2018

used

on request

INNO30187

A Euromac doctor rewinder for unwinding and rewinding web materials on rolls is available. Web width: 450mm, max. speed: 400m/min, materials: paper/aluminum/composite materials, material thickness range: 30µm-100µm, max. parent roll diameter: 520mm, max. roll weight: 100kg, max. rewind diameter: 520mm, max. core/adapter inner diameter: 76mm/120mm. Including Häwa water cooling, floor scanner, and side safety fence. Documentation available. An on-site inspection is possible.

Chiller

Daikin EWQ009ACW1P

Germany

2010

used

on request

INNO30186

A small Daikin chiller with inverter is available. Refrigerant: R410A, refrigerant charge: 2.95kg, max. operating pressure high/low side: 4MPa/3MPa, max. water pressure: 3bar, weight: approx. 180kg. Documentation available. An on-site inspection is possible.

Refrigerating plant

Hyfra Alpha 34-2-W-S

Germany

2021

used

on request

INNO30185

Two identical Hyfra refrigeration units are available. Cooling capacity: 25kW, refrigerant: R410A, refrigerant charge: 4kg, max. operating pressure: 42bar, medium: water, pumps process/standard: 2/2, pump type: CM3-4/CM5-5. Machine dimensions X/Y/Z: approx. 1650mm/750mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Chiller

Ers SC 22.0 VS

Germany

2014

used

on request

INNO30184

A refrigeration unit ERS is available. Refrigerant: R407C, refrigerant quantity: 13kg, heat inlet/outlet temperature: 15°C/20°C, cooling capacity: 25580W, tank volume: 360l, pump capacity at 390kPa: 4.4m³/h, max. operating pressure low/high: 22bar/29bar. Machine dimensions: approx. 1650mm/900mm/2000mm, weight: approx. 930kg. Documentation available. An on-site inspection is possible.

Projetion Welding Machine

Dalex PMS 32-5

Germany

2012

used

on request

INNO30183

A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible.

Sleeving Line

Berning BS

Germany

2018

used

on request

INNO30181

A complete Berning sleeve packaging line for the automated labeling and packaging of bottles or cups in shrink sleeves is available. 1) Berning Maschinenbau sleeve machine, year of manufacture: 2018, cycle rate: 100cycles/min, max. product passage height: 320mm, product width range: 10mm–190mm, operating hours: approx. 3562h. 2) Franz Tölke bottle unscrambler, year of manufacture: 2018, output capacity: 240pieces/min. Includes aligner and cup inserter. 3) Ropack counting unit with automatic carton changer. Documentation available. An on-site inspection is possible.

CNC Cycle Lathe

Microcut Challenger BNC

Germany

unknown

used

on request

INNO30178

A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.

CNC Lathe

Style 650/3000

Germany

unknown

used

on request

INNO30177

Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible.