Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [641 - 660 of 2579]

Vent Fittings Assemly Table

Schüco FPM 350 AV

Germany

2012

used

on request

INNO29435

A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.

Corner Jointing Machine

Schüco CC 120 A

Germany

2008

used

on request

INNO29434

Zwei Eckverbindungsmaschinen Schüco für den Fensterbau stehen zur Verfügung. 1) Schüco CC 120 A, Baujahr: 2008, max. Profilhöhe: 120mm, max. Stanzhöhe: 105mm, min. Rahmen-Innendimensionen X/Y: 400mm/400mm, Maschinendimensionen X/Y/Z: ca. 1450mm/1500mm/1000mm, Gewicht: ca. 700kg. 2) Eckverbindungsmaschine Schüco, Baujahr: 1997, Nenndruck: 0,7MPa, Luftverbrauch: 100l/Ecke, Gewicht: ca. 650kg. Eine Besichtigung vor Ort ist möglich.

Dual-Fuel Burner

Weishaupt RGL 70/1-A

Germany

1990

used

on request

INNO29433

A Weishaupt dual-fuel burner is available. Fuel: gas/fuel oil, gas type: N, category: I, set pressure min./max.: 30bar/180bar, heat output: 850kW-8550kW, oil throughput: 150kg-720kg/h, fuel oil: EL, engine output: 14kW, machine dimensions X/Y/Z: approx. 2100mm/1400mm/900mm. On-site inspection is possible.

Pipe Bending Machine

Wafios/kuka RB20/KR 16-2 KRC 2

Germany

unknown

used

on request

INNO29431

An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible.

Plotter

Lasercomb FSP 1613

Germany

unknown

used

on request

INNO29430

Working range X/Y: 1600mm/1300mm, max. material thickness: 7mm, machine dimensions X/Y/Z: approx. 2300mm/2250mm/850mm, weight: approx. 650kg. The control board of the head has a faulty circuit and is defective. Documentation available. On-site inspection is possible.

Rotary Transfer Machine

Pfiffner Hydromat HW25

Germany

1999

used

on request

INNO29427

There are 4 almost identical Pfiffner CNC rotary transfer machines available. Years of construction: approx. 1999, control: Siemens S5/Siemens HME, stations: 12, process: sawing/feed/turning, operating hours: approx. 8500 hours: Sawing/feed/turning, operating hours: approx. 85383. Including loader, switch cabinet, chip conveyor, cooling lubricant system and a total of approx. 35 processing units. Documentation available. On-site inspection is possible. The machines are dismantled and stored, but it is possible to see similar machines in operation. One machine is incomplete and suitable as a spare parts carrier.

Multi-Blade Saw

Cml SCA 320R T350

Germany

1998

used

on request

INNO29426

A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible.

High-Speed Mixer

Henschel FM1000

Germany

1994

used

on request

INNO29425

A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible.

CNC Lathe

Miyano BNE-51S

Germany

1998

used

on request

INNO29424

Bar diameter: 51mm, collet diameter (counter spindle): 41mm, turning diameter: 120mm, turning length: 90mm, spindle speed: 4000rpm, power main spindle/counter spindle: 11kW/5.5kW, travel X1/Z1/X2/Z2: 150mm/380mm/115mm/125mm, turret: 2, tool positions top/bottom: 12/10. Machine dimensions X/Y/Z: approx. 2600mm/1900mm/1950mm, weight: approx. 6300kg. The Fuji part (see picture 5) is defective. Documentation available. On-site inspection is possible.

CNC Lathe

Okuma LB4000 EX

Germany

2008

used

on request

INNO29423

Turning diameter: 480mm, turning length: 1500mm, orbital diameter over bed: 670mm, spindle speed: 4200rpm, spindle bore: 91mm, tool positions: 12, tool speed: 6000rpm, C-axis: 360°, C-axis resolution: 0.001°, travel X/Z: 300mm/1590mm, rapid traverse X/Z: 25m/30m/min. Machine dimensions X/Y/Z: approx. 4200mm/2400mm/2200mm, weight: approx. 8200kg. Documentation available. On-site inspection is possible.

Water Jet Cutting Machine

Abb IRB 6600 M2004

Germany

2005

used

on request

INNO29421

A robot-based waterjet cutting system without a high-pressure pump is available. 1) Industrial robot ABB IRB 6600 M2004, axes: 6, load capacity: 175kg, reach: approx. 2800mm, repeat accuracy: +/-0.05mm, robot weight: approx. 1750kg. 2) Water basin catcher TF3020, working area X/Y: 3000mm/2000mm, basin dimensions X/Y/Z: approx. 3150mm/2150mm/700mm. 3) High-pressure cutting head, reaction time: 0.1s, operating pressure: 400MPa (4000bar), weight including collimation tube: approx. 1500g. 4) 3D collimation tube extension for pure water operation. 5) 1/4 inch HD filter MF4-56, filter insert: 56µm, connection type: HP4, operating pressure: 450MPa (4500bar). 6) Complete high-pressure piping of the robot. 7) Pneumatic components for controlling the cutting valves and metering slides. 8) High-speed motor. 9) Protective housing for the entire robot system, parapet height: 1090mm, wall thickness: 45mm, sound insulation: approx. 25dB(A), internal dimensions X/Y/Z: approx. 3955mm/3955mm/3470mm, external dimensions X/Y/Z: approx. 4050mm/4050mm/3600mm. Total system dimensions X/Y/Z: approx. 4500mm/4000mm/3700mm, total system weight: approx. 3500kg. Documentation available. On-site inspection is possible.

Bag Forming, Filling and Sealing Machine

Rcm Engineering topcut 207/Heisskeil 411

Germany

2010

used

on request

INNO29420

A semi-automatic tubular bag processing and sealing station RCM Engineering GmbH is available. Belt width: 108mm, machine dimensions X/Y/Z: approx. 520mm/310mm/450mm, weight: approx. 45kg. Documentation available. On-site inspection is possible.

Sewing Machine

Brother/adler/mauser/brother LS2/K767/MA335/KE403

Germany

2017

used

on request

INNO29419

A total of 5 sewing machines from various manufacturers are available. 1) Brother LS2-B837. 2) Adler K767 990001. 3) Mauser MA335-G-6/01-BLN. 4) Brother KE-430 FX-05, year of manufacture: 2017, needle: 135x172 Nm110. 5) Dürkopp Adler. On-site inspection is possible.

Injection Moulding Machine

Demag/wittmann Extra 50-200

Germany

2006

used

on request

INNO29418

A Demag Ergotech injection molding machine including Wittmann robot and machine housing is available. 1) Injection molding machine Demag Ergotech 50/355-200, year of construction: 2006, tie bar distance X/Y: 355mm/355mm, min. installation height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, injection weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control: CDIAS. 2) Handling robot Wittmann W721, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Cage. Documentation available. On-site inspection is possible.

CNC Cycle Lathe

Boehringer VDF DUS 800

Germany

1995

used

on request

INNO29417

A Boehringer cycle-controlled CNC lathe is available. Turning diameter over bed/face slide: 820mm/520mm, turning length: 1000mm, spindle bore: 128mm, quill diameter: 125mm, quill stroke: 280mm, max. workpiece weight: 5000kg. Machine dimensions X/Y/Z: approx. 3700mm/2400mm/2500mm, weight: approx. 6500kg, operating hours: 39814h. On-site inspection is possible.

Glazing Press

Polzer C-VKS 3502

Germany

unknown

used

on request

INNO29416

A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible.

Single Screw Extruder

Weber/ide ET 45/MEB 30-25D

Germany

1987

used

on request

INNO29413

A Weber single-screw extruder including an IDE coextruder and a cooling water basin is available. 1) Weber ET 45, year of manufacture: 1970, screw diameter: 45mm. 2) IDE MEB 30-25D, year of manufacture: 1987, drive: 3.8kW, screw speed: 6U-64U/min, screw diameter: 30mm, process length: 25D. On-site inspection is possible.

Single Screw Extruder

Weber ET45

Germany

1968

used

on request

INNO29412

A Weber extruder including cooling water basin is available. Screw diameter: 45mm. Documentation available. On-site inspection is possible.

Twin Screw Extruders

Weber CE5K

Germany

1989

used

on request

INNO29411

A conical twin-screw extruder Weber for PVC profile extrusion including cooling water basin, pull-out machine and a saw is available. Extrusion capacity: approx. 90kg/h, drive: 30kW, injection height: 100mm, temperature range: 0°C-300°C, motor power: approx. 20kW, controller: Philips Pastomatic, weight: approx. 1000kg. Documentation available. On-site inspection is possible.

Binding Machine

Horizon Perfect Binder BQ-270

Germany

2006

used

on request

INNO29410

A Horizon binder is available. Book block thickness range: 1mm-50mm, min. book format: 135mm/105mm, max. book format: 320mm/320mm, min. cover format: 135mm/230mm, max. cover format: 320mm/660mm, paper thickness range: 80g-300g/m², max. cover stack height: 70mm, trimming depth: 0mm-3mm, output: 500 cycles/h. Machine dimensions X/Y/Z: approx. 2300mm/900mm/1250mm, weight: approx. 900kg, counter reading: 358000. An on-site inspection is possible.