Innovac GmbH Used machines from Germany
Innovac used-machines Latest Offers  [2721 - 2740 of 3119]
Granulation-Mill-Herbold used
Granulation Mill
Herbold
Germany
unknown
used
on request
INNO25800
Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022.
Double-Screw-Bunker used
Double-Screw Bunker
Germany
unknown
used
on request
INNO25801
Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional design with bunker walking elevation, an inspection is possible, year of construction unknown, was overhauled in 2022.
Smoke-Chamber-Schich-Gmbh-KS1 used
Smoke Chamber
Schich Gmbh KS1
Germany
unknown
used
on request
INNO25781
Trolley dimensions: 920x910x1950mm, connected load: 24kW, length: 1560mm, height: 2560mm, with documentation, a few years ago the electrics were completely overhauled.
CNC-Router-Cnc-step-E.-K.-High-Z-S-1000 used
CNC-Router
Cnc-step E. K. High-Z/ S-1000
Germany
2016
used
on request
INNO25783
With documentation, an inspection is possible.
Resistance-Annealing-Machine-Tecno-Induction used
Resistance Annealing Machine
Tecno Induction
Germany
2016
used
on request
INNO25790
Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.
Winding-Machine-Schmidt-SD20-30-7 used
Winding Machine
Schmidt SD20-30/7
Germany
1993
used
on request
INNO25776
Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.
Selective-Soldering-System-Seho-Power-Selective-PO-SEL used
Selective Soldering System
Seho Power Selective PO SEL
Germany
2009
used
on request
INNO25769
Connected load: 18kW, was overhauled in 2017, an inspection is possible.
Metal-Band-Saw-Forte-F-250 used
Metal Band Saw
Forte F 250
Germany
1996
used
on request
INNO25748
Length: 2200mm, width: 1200mm, height: 535mm, weight: 385kg.
Screw-Compressor-Atlas-Copco-GA30 used
Screw Compressor
Atlas Copco GA30
Germany
unknown
used
on request
INNO25749
An inspection is possible.
Electric-Convection-Oven-David-and-Baader-Gmbh-Kandel-ITHU used
Electric Convection Oven
David & Baader Gmbh Kandel ITHU
Germany
1988
used
on request
INNO25750
Max. operating temperature: 200°C, usable space: 4.42m³, steam room volume: 5.6m³, volume flow: 9.87m³/min, heating output: 30kW, nominal output: 32.2kW.
Rock-Drill-Sandvik-Tamrock-PANTERA-900 used
Rock Drill
Sandvik Tamrock PANTERA 900
Germany
2001
used
on request
INNO25723
Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation.
Grinding-Plant-Neumannn-and-Esser-Gmbh-PM-00-O1 used
Grinding Plant
Neumannn & Esser Gmbh PM 00 O1
Germany
2018
used
on request
INNO25731
Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years.
Four-Roller-Bending-Machine-Haeusler-VRM-hy-3500x65-55 used
Four-Roller Bending Machine
Haeusler VRM-hy 3500x65/55
Germany
1981
used
on request
INNO25713
Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012.
Clamping-and-Welding-Machine-Haeusler-Krokodil used
Clamping and Welding Machine
Haeusler Krokodil
Germany
2002
used
on request
INNO25717
Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.
Clamping-and-Welding-Machine-Haeusler-Clamp-Standard used
Clamping and Welding Machine
Haeusler Clamp Standard
Germany
2007
used
on request
INNO25718
Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm.
Radial-Drilling-Machine-Kone-KR-60 used
Radial Drilling Machine
Kone KR 60
Germany
1992
used
on request
INNO25721
Rotational speed: 45-1750/min, connected load: 8.36kW.
Single-Column-Eccentric-Press-Müller-ExP-100R used
Single-Column Eccentric Press
Müller ExP 100R
Germany
unknown
used
on request
INNO25722
Pressing force: 100t, throat depth: 300mm, stroke speed: 60/min, stroke adjustment: 10-100mm, motor power: 7,5hp.
Glass-Drilling-Machine-Lattuda--TP-1000.1H used
Glass Drilling Machine
Lattuda TP 1000.1H
Germany
2023
used
on request
INNO25681
Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used.
Impact-Crusher-Pozatto-FL-35 used
Impact Crusher
Pozatto FL 35
Germany
unknown
used
on request
INNO25668
Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar.
Vertical-Crusher-Krupp used
Vertical Crusher
Krupp
Germany
unknown
used
on request
INNO25670
Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.