Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email

A reliable partner at your side for used machinery from Germany

More
Innovac used-machines Latest Offers  [1 - 20 of 2635]
CNC-Multi-Spindle-Lathe-Index-MS-22-C used
CNC Multi Spindle Lathe
Index MS 22 C
Germany
2011
used
on request
INNO30486
A defective CNC 6-spindle lathe Index is available: Speed: 10000rpm, main spindle power: 8.7kW/15kW, max. bar diameter: 22mm, tool stations: 10, travel X/Z: 62mm/85mm, travel Y: +/-12mm, max. clamping diameter: 22mm, machine dimensions X/Y/Z: approx. 3350mm/1850mm/2900mm, weight: approx. 6000kg, control: Siemens 840C. Includes tool holders, Knoll coolant system, Iemca SIR MS 22 P bar loader, HandlingTech robot cell. One spindle must be refitted with new bearings and the synchron spindle must be replaced. Documentation available. An on-site inspection is possible.
more
Labelling-Machine-Krones-Bonamatic-728 used
Labelling Machine
Krones Bonamatic 728
Germany
2006
used
on request
INNO30485
A Krones labeling system with three labeling units is available. Labeling type: variable, wet glue units: 2, self-adhesive units: 1, max. labeling capacity: 72000 containers/h, gripper bore: 150mm, threaded bore: M8, pitch circle: 195mm. Machine dimensions X/Y/Z: approx. 2550mm/2550mm/2500mm. Documentation available. An on-site inspection is possible.
more
Punching-and-Cutting-Machine-Mubea-KBLH-500 used
Punching and Cutting Machine
Mubea KBLH 500
Germany
unknown
used
on request
INNO30484
A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible.
more
Injection-Moulding-Machine-Arburg-Allrounder-420C-1000-290 used
Injection Moulding Machine
Arburg Allrounder 420C 1000/290
Germany
2006
used
on request
INNO30483
Screw diameter: 40mm, clamping force: 1000kN, tie bar distance: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, ejector force: 40kN, ejector stroke: 175mm, shot volume: 188cm3, injection pressure: 1530bar. Machine dimensions X/Y/Z: approx. 4300mm/4200mm/2100mm, weight: approx. 3750kg, operating hours: approx. 73000h. Documentation available. An on-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-Allrounder-470C-1500-400 used
Injection Moulding Machine
Arburg Allrounder 470C 1500/400
Germany
2012
used
on request
INNO30482
Screw diameter: 40mm, screw stroke: 160mm, displacement volume: 201cm³, shot weight: 184g, injection pressure: 2000bar, shot volume: 168cm³, clamping force: 1500kN, opening force: 350kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, tie bar distance: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, weight: approx. 5000kg, operating hours: approx. 46000h. Documentation available. An on site inspection is possible.
more
Injection-Moulding-Machine-Arburg-Allrounder-470C-1500-400 used
Injection Moulding Machine
Arburg Allrounder 470C 1500/400
Germany
2009
used
on request
INNO30481
Screw diameter: 40mm, screw stroke: 160mm, displacement volume: 201cm³, shot weight: 184g, injection pressure: 2000bar, shot volume: 168cm³, clamping force: 1500kN, opening force: 350kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, tie bar distance: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, weight: approx. 5000kg, operating hours: approx. 60000h. Documentation available. An on site inspection is possible.
more
Injection-Moulding-Machine-Arburg-Allrounder-220S-180-70 used
Injection Moulding Machine
Arburg Allrounder 220S 180/70
Germany
2018
used
on request
INNO30480
A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-Allrounder-270C-400-70 used
Injection Moulding Machine
Arburg Allrounder 270C 400/70
Germany
2020
used
on request
INNO30479
Clamping force: 400kN, max. opening force: 130kN, max. opening stroke: 350mm, min. mold height: 200mm, max. platen distance: 550mm, tie bar distance: 270mm/270mm, max. moving mold half: 180kg, ejector stroke: 125mm, ejector force: 30kN, injection unit: Euromap 70, screw diameter: 22mm, injection pressure: 2500bar, weight: approx. 2200kg, operating hours: approx. 12400h. Documentation available. An on site inspection is possible.
more
Injection-Moulding-Machine-Arburg-Allrounder-270C-400-70 used
Injection Moulding Machine
Arburg Allrounder 270C 400/70
Germany
2024
used
on request
INNO30478
An Arburg injection molding machine is available. Clamping force: 400kN, max. opening force: 130kN, max. opening stroke: 350mm, min. mold height: 200mm, max. platen distance: 550mm, tie bar distance: 270mm/270mm, max. moving mold half: 180kg, ejector stroke: 125mm, ejector force: 30kN, injection unit: Euromap 70, screw diameter: 18mm, injection pressure: 2500bar, weight: approx. 2200kg, operating hours: approx. 4100h. Documentation available. An on site inspection is possible.
more
Cooling-Track-Pennekamp used
Cooling Track
Pennekamp
Germany
2004
used
on request
INNO30477
A continuous Pennekamp cooling line/belt cooling section is available. Belt width: 3800mm, pass through height: 400mm, zones: 8, burner: Pennekamp. Includes a partially existing spray system with mixing tank. Some control components have been removed. Documentation available. An on site inspection is possible.
more
Cooling-Track-Pennekamp used
Cooling Track
Pennekamp
Germany
2012
used
on request
INNO30476
A continuous cooling line/band cooling section Pennekamp is available. Belt width: 4500mm, pass-through height: 400mm, zones: 7, total length: approx. 23750mm. Some control components have been removed. Documentation available. An on-site inspection is possible.
more
Testing-System-Spitzenberger-Spies-EMV-D-30000-PAS used
Testing System
Spitzenberger Spies EMV D 30000/PAS
Germany
unknown
used
on request
INNO30475
Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.
more
PET-Press-Strautmann-BP-900 used
PET Press
Strautmann BP 900
Germany
2008
used
on request
INNO30474
A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible.
more
Fuel-Oil-Tank-Tankschutz-Philipp-Doppelwand used
Fuel Oil Tank
Tankschutz Philipp Doppelwand
Germany
2018
used
on request
INNO30473
An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible.
more
Sheet-Metal-Shear-Schneider used
Sheet Metal Shear
Schneider
Germany
unknown
used
on request
INNO30472
A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible.
more
Table-Drilling-Machine-J.-Neu-BA.A2.AC used
Table Drilling Machine
J. Neu BA.A2.AC
Germany
2010
used
on request
INNO30471
Drilling unit / profile drilling machine Alzmetall AC32, drill head. The maintenance work includes: new disc spring set in the drill head (11/2025), new servo motor for speed adjustment (09/2025), new disc set for shaft 2 (approx. 09/2023) and a complete belt replacement (11/2024). Note: V ribbed belt is 1.4mm before the wear limit. Inspection by appointment possible.
more
Dowel-Drilling-Machine-Ayen-DB-1200-B-39 used
Dowel Drilling Machine
Ayen DB 1200 B 39
Germany
1977
used
on request
INNO30470
Precision dowel boring machine. Pneumatic clamping, 2 drilling units, swivelling (0-90 degrees). Working width approx. 1200mm. Inspection possible by appointment.
more
CNC-Vertical-Machining-Center-Brother-TC-225 used
CNC Vertical Machining Center
Brother TC-225
Germany
unknown
used
on request
INNO30468
A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment.
more
Soldering-System-Dr.-Fritsch-SLM-523 used
Soldering System
Dr. Fritsch SLM 523
Germany
1997
used
on request
INNO30467
A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible.
more
Refrigerating-Machine-Wöhr-D20V-D30V used
Refrigerating Machine
Wöhr D20V / D30V
Germany
1998
used
on request
INNO30466
2 oil coolers - through-flow oil coolers: year of construction 1998. Refrigerant: R404A, circulation pump, LAE controller MTR11, suitable for clean oil. Documentation available. 1) Type D 20 V, cooling capacity: 2kW, Walter Procon connector plug, total power consumption 1.7kW. 2) Type D 30 V, cooling capacity: 3.3kW, CEE connector plug, total power consumption 2kW. Dimensions X/Y/Z: approx. 800mm/750mm/1100mm. Inspection possible by appointment.
more
Innovac Gebrauchtmaschinen Our Program
Agricultural-machines 2
Automation-technology 64
Beverage-filling-technology 33
Complete-production-lines 1
Construction-machinery 26
Energy-management 133
Food-processing-and-beverage 127
Material-storage 67
Materials-handling-technology 66
Measurement-and-testing 72
Medical-equipment 9
Metal-processing-machines 1018
Mining 3
Office-equipment 2
Other-machines 63
Packaging-machines 232
Pharmaceutical-and-cosmetics 16
Plastics-processing-machines 178
Printing-machines 70
Process-equipment-and-chemistry 164
Packaging-material-machinery 72
Robotics 37
Surplus-goods 5
Textile-machinery 89
Utility-vehicles 6
Woodworking-machines 80