Innovac GmbH Used machines from Germany
Innovac used-machines Latest Offers  [2381 - 2400 of 3119]
Decanter-Centrifuge-Gea-CD-350-00-00 used
Decanter Centrifuge
Gea CD 350-00-00
Germany
2002
used
on request
INNO28032
Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible.
Water-Cooled-Liquid-Chiller-Carrier-30RW-30RWA-210 used
Water-Cooled Liquid Chiller
Carrier 30RW/30RWA-210
Germany
2004
used
on request
INNO28028
Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects.
Lathe-Wmw-DLZ-630-IV-x2000 used
Lathe
Wmw DLZ 630 IV x2000
Germany
1983
used
on request
INNO28026
Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.
Pick-And-Place-Machine-Mechatronika-M10V used
Pick-And-Place Machine
Mechatronika M10V
Germany
2022
used
on request
INNO28008
A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible.
UV-Dryer-Esc-special used
UV Dryer
Esc special
Germany
2005
used
on request
INNO28007
Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible.
Slitting-and-Winding-System-Calator-weiss-bastian-SEM-SRE used
Slitting and Winding System
Calator/weiss/bastian SEM-SRE
Germany
1988
used
on request
INNO28005
A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible.
CNC-Machining-Center-Hurco-VMX-50 used
CNC Machining Center
Hurco VMX 50
Germany
2006
used
on request
INNO28004
Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.
Continuous-Baking-Oven-Silex-DB-SF-410-1150 used
Continuous Baking Oven
Silex DB SF-410/1150
Germany
2010
used
on request
INNO28000
A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible.
Mobile-Crane-Demag-LK-910-483-V used
Mobile Crane
Demag LK 910/483-V
Germany
1972
used
on request
INNO27996
Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible.
Electric-Pedestrian-Forklift-Truck-Genkinger-EGG-20-31-I used
Electric Pedestrian Forklift Truck
Genkinger EGG 20/31 I
Germany
2019
used
on request
INNO27994
Load dimensions: 1200x800mm, max. load capacity: 2t, fork lift: 46-3120mm, fork tine dimensions: 1000x100x40mm, travel speed: 5km/h, motor power: 2kW, length: 2930mm, width: 940mm, operational hours counter: 41h. With documentation, no defects known, an on-site inspection is possible.
Cross-Belt-Grinding-Machine-Linden-Machines-B.v.-MC-QB-900 used
Cross Belt Grinding Machine
Linden Machines B.v. MC/QB-900
Germany
1990
used
on request
INNO27986
Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.
Bulldozer-Liebherr-PR-722-BL used
Bulldozer
Liebherr PR 722 BL
Germany
1995
used
on request
INNO27985
A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.
CNC-Profile-Machining-Center-Tekna-TK-426-3 used
CNC Profile Machining Center
Tekna TK 426/3
Germany
1998
used
on request
INNO27975
Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.
Ultrasonic-Welding-System-Telsonic-Amtek-Gmbh used
Ultrasonic Welding System
Telsonic/ Amtek Gmbh
Germany
2014
used
on request
INNO27967
An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.
Compressed-Air-Tank-Atlas-Copco used
Compressed Air Tank
Atlas Copco
Germany
2020
used
on request
INNO27966
Volume: 250l, max. operating pressure: 11bar, outer diameter: 450mm, stand height: 1800mm, medium temperature min./max.: -10°C/120°C. Documentation available. On-site inspection is possible. The machine is unused and as good as new.
Ultrasonic-Welding-System-Telsonic-Maschinenbau-Raab-TSP-3000-1P used
Ultrasonic Welding System
Telsonic/ Maschinenbau Raab TSP-3000-1P
Germany
2010
used
on request
INNO27965
An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.
Ultrasonic-Welding-System-Telsonic-Ansotec-ULTRASONIC-USP-3000 used
Ultrasonic Welding System
Telsonic/ Ansotec ULTRASONIC USP 3000
Germany
2009
used
on request
INNO27963
Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible.
Hot-Stamping-Machine-Baier-32-SV used
Hot Stamping Machine
Baier 32/SV
Germany
2014
used
on request
INNO27948
A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible.
CNC-Keyseating-Machine-Balzat-32-300 used
CNC Keyseating Machine
Balzat 32/300
Germany
1991
used
on request
INNO27947
Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible.
CNC-Spark-EDM-Machine-Matra-fanuc-TAPE-CUT-W1 used
CNC Spark EDM-Machine
Matra-fanuc TAPE-CUT-W1
Germany
unknown
used
on request
INNO27939
Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.