Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [2301 - 2320 of 3071]

Tipping and Sorting System

Skako/ventzki 50D/NEE 511-111-S

Germany

2013

used

on request

INNO27909

A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.

Dry Evaporator

Pp-tec 3000M

Germany

2023

used

on request

INNO27907

Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging.

Liquid Gas Tank

Kadatec

Germany

2022

used

on request

INNO27906

Volume: 2900kg/6400l, length: 6000mm, diameter: 1250mm, height: 1400mm, filling: liquid gas according to DIN 51622/EN589, max. filling level: 85%, test pressure: 22.3bar, max. permissible pressure: 15.6bar, permissible temperature min./max.: +20°C/40°C, storage: above ground. Including foundation plates (2400mm/1200mm/120mm) and steel frame. Documentation available. On-site inspection is possible.

Stirrup Bending Machine

Mep Macchine Elettroniche Piegatrici System N

Germany

1997

used

on request

INNO27902

Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.

Flame Cutting Machine

Esab SUPRAREX SXE-P (D)

Germany

1999

used

on request

INNO27891

Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible.

Spindle Moulder

Casadei FM5C

Germany

1994

used

on request

INNO27889

There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible.

Circular Saw Bench

Avola GAMA 75R

Germany

2001

used

on request

INNO27888

Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible.

Precision Circular Saw

Maka KS 3000

Germany

2000

used

on request

INNO27887

Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible.

Welding Machine

Heberle/hbs/lorch/mig O Mat/castolin+eutectic cd System 2010/SEW 200N/MIG O MAT WIGSTAR 250i

Germany

unknown

used

on request

INNO27872

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

Air Conditioning and Ventilation System

Wolf WK-101

Germany

2008

used

on request

INNO27871

A Wolf air conditioning and ventilation system, consisting of a supply air unit, an extract air unit and a heater, is available. 1) Wolf WK-101 supply air unit, nominal volume flow: 8500m³/h or 2.36m³/s, total/exact delivery pressure: 675Pa/250Pa, fan efficiency: 75.3%, fan speed: 2131rpm, fan power: 2.4kW, differential pressure: 1861Pa, motor power: 3kW, motor speed: 1420rpm. 2) Wolf WK-101 exhaust air unit, nominal volume flow: 8500m³/h or 2.36m³/s, number of filters: 4, filter class: F5, filter type: Biost. Pocket filter TK F5 PVC, initial pressure difference: 69Pa, final pressure difference: 200Pa. 3) Wolf WK-101 heater, nominal volume flow: 8500m³/h or 2.36m³/s, nominal heat output: 51.4kW, air inlet and air outlet temperature: -14°C/4°C, heating medium: water-glycol, flow temperature: 12.8°C, return temperature: 0.7°C, medium flow rate: 4240l/h, glycol content: 30%, max. operating temperature: 120°C, pressure difference air/water: 0Pa/29.5Pa. On-site inspection is possible.

Strapping Machine

Humboldt Verpackungstechnik HS 560

Germany

2006

used

on request

INNO27870

Strapping capacity: 28/h, strap width: 12mm, strap tension: 100N-3500N, frame dimensions X/Y: 800mm/800mm, working height: 810mm, machine dimensions X/Y/Z: 1430mm/620mm/1540mm. On-site inspection is possible.

Strapping Machine

Cyklop CI SOY

Germany

1993

used

on request

INNO27869

Strap width range: 9mm-12mm, strapping capacity: 35rpm, max. package width: 600mm, max. package height: 1200mm, strap tension range: 7kg-70kg. On-site inspection is possible.

Mitre Saw

Eisele VMSII PV PROD

Germany

1982

used

on request

INNO27868

Saw blade diameter: 275mm, cutting range round (90°): 100mm, cutting range flat (90°): 160mm/80mm, speed: 40rpm - 80rpm. On-site inspection is possible.

Envelope Printing Machine

Winkler + Dünnebier 527 GS

Germany

1993

used

on request

INNO27866

Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible.

Brushing Machine

Boere ELITE 1650 BM TB

Germany

2013

used

on request

INNO27865

Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible.

CNC EDM-Machine

Charmilles Robofil 310

Germany

unknown

used

on request

INNO27862

Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible.

Circular Saw

Eisele VMSII-033

Germany

1982

used

on request

INNO27859

Saw blade diameter: 275mm, power: 1.9kW, speed: 80rpm, cutting range (flat): 140mm/70mm, cutting range (miter): 100mm/70mm, max. pipe cutting capacity: 3 inches, solid material cutting capacity: 80mm/60mm, square material cutting capacity: 50mm/50mm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1500mm, weight: approx. 300kg. On-site inspection is possible.

Tool Milling Machine

Ipte FUS-32

Germany

unknown

used

on request

INNO27858

Travel X/Y/Z: 560mm/320mm/400mm, speed: 3600rpm, tool holder: SK40, power: 3kW, table dimensions X/Y: 450mm/950mm, weight: approx. 1650kg. Including various accessories. On-site inspection is possible.

Dough Cutting and Weighing Machine

Seewer/rondo Doge STC1 A0

Germany

2002

used

on request

INNO27853

Application: bread and pastry products, belt length: 1250mm, belt width: 610mm, dough thickness range: 0mm-35mm, dough weight range: 200g-2400g. On-site inspection is possible.

CNC Vertical Machining Center

Deckel Maho DMC 100 V

Germany

1991

used

on request

INNO27851

Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. The machine has no controls anymore. Documentation available. On-site inspection is possible.