Used machines Germany - Innovac GmbH

Horizontal Boring Machine

Wmw BK63

Germany

1960

used

on request

INNO26824

Projection: 315mm, spindle speeds min.-max.: 9 steps, 63rpm-1000rpm, worktable size: 500mm/400mm, dimensions X/Y/Z: 2300mm/1000mm/700mm, weight: 1000kg. Feed defective.

more

Winding Machine

Blume Und Redecker AM 100

Germany

unknown

used

on request

INNO26823

Max. wire diameter: 3.75mm, max. spool diameter: 340mm, max. spool length: 600mm, max. speed: 2700rpm, tip height: 150mm.

more

Slitter Rewinder

Saval PTP 505

Germany

unknown

used

on request

INNO26828

Working width: 1600mm, max. thickness for knife cut/circular cut: 20mm/10mm, number of blades: 4.

more

Grinding Machine

Wmw SU 315x2000

Germany

unknown

used

on request

INNO26825

Grinding diameter: 315mm, grinding length: 2500mm, center height: 165mm, speed: 500rpm (10 steps), spindle bore diameter/taper: 30mm/MK4, grinding wheel diameter: max. 500mm, table size: 3500mm/310mm, table tilt: approx. 4.8°, longitudinal feed of the table: 5-2680mm, feed: 50-4000mm/rev. Weight: approx. 7400kg, Dimensions X/Y/Z: 6500mm/1700mm/2000mm. Headstock defective, can be repaired.

more

Surface and Profile Grinding Machine

Elb Schliff Optimal 6375 SPS-NK

Germany

1996

used

on request

INNO26822

Grinding length: 600mm, grinding width: 375mm, workpiece height: 375mm, magnetic table dimensions X/Y: 600mm/400mm, grinding wheel dimensions: 300mm/50mm, max. table speed: 30m/min, grinding wheel speed: 1450rpm, weight: approx. 3500kg, dimensions X/Y/Z: 2800mm/2500mm&2500mm. Guideway run-in, no oil pockets, magnet failure X and Y axes 0.01mm and 0.02mm respectively. Machine in good working order. Documentation available.

more

Handling Robot

Arburg Multilift H m. B-Achse

Germany

2019

used

on request

INNO26826

Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.

more

Slitter Rewinder

Pasquato TR 15/450

Germany

2002

used

on request

INNO26827

Working width: 1500mm, max. master roll diameter: 450mm, max. master roll weight: 400kg, max. end roll diameter: 450mm, max. end roll weight: 90kg/shaft, min. slitting width: 10mm, winding speed: 100m/min.

more

Sand Blast Machine

Peenmatic 1800 SDK

Germany

2000

used

on request

INNO26817

Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available.

more

Drilling and Milling Machine

Hille/raboma/shw UE 21/SKM/BG 80

Germany

1959

used

on request

INNO26815

There are 3 old used machines without documentation available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines in working order. On-site inspection is possible.

more

CNC 5-Axis Machining Centre

Emmegi Phantomatic T5

Germany

2006

used

on request

INNO26818

Travel X/Y/Z/P/H: 7000mm/300mm/350mm/3500mm/3500mm, rapid traverse X/Y/Z/P/H: 56/22.5/22.5/45/45 m/min. Acceleration X/Y/Z/P/H: 4.68/1.84/1.84/3.75/3.75 m/s². Tool positions: 2x (5+1) positions, max. diameter of milling tool/threading tool/saw blade: 50mm/M10 continuous, wall thickness 5mm/180mm, max. angle head width with 2 holders: 239mm. Speed: 18000rpm, tool holder: ISO30, air consumption: 175Nl/min, max. workpiece dimensions with vertical tools: 165mm/200mm/6650mm, weight: 3100kg. Documentation available.

more

Screw Compressor

Kaeser SK19

Germany

1997

used

on request

INNO26819

Power: 11kW, Voltage: 230/460Volt, 3-Phase, max. Operating Pressure: 10bar, Flow Rate: 1.5m³/min, max. Flow Rate: 1.92m³/min (68 CFM), Flow Rate at Max. Pressure: 1.27 m³/min (45CFM). Dimensions (Length/Width/Height): 812,8mm/762mm/1041,4mm

more

Stretch Wrapper

Cyklop GL110/11

Germany

unknown

used

on request

INNO26808

Diameter of the winding plate: 1500mm, height of the machine: 2500mm. Documentation available.

more

Vacuum Mixer

Mainali Amasadora AV-50

Germany

unknown

used

on request

INNO26806

Capacity: 50l, machine dimensions: Length: 880mm, Width: 680mm, Height with flap closed/open: 1030mm/1350mm. On-site inspection is possible.

more

Can Inspection Machine

Industrial Physics Eagle Vision 360°

Germany

2014

used

on request

INNO26807

Max. output: 108000 cans/hour, accuracy: defect detection approx. 2x2mm-3x3mm, reliability of detection: up to 99.9%, error rate: under 0.1%, weight: 500kg, dimensions X/Y/Z: 1300mm/1400mm/1565mm. Documentation available. For more detailed data, an on-site inspection is possible.

more

Plotter

Hp Designjet T520 ePrinter

Germany

2014

used

on request

INNO26809

Number of print cartridges: 4 (cyan, magenta, yellow, black), ink types: Dye-based (C, M, Y) and pigment-based (K), print quality max: 2400 x 1200 optimized dpi, minimum line width: 0.07mm, line precision: ±0.1%, max optical density (black): 8 L* min/2.10D. Documentation available.

more

Hydraulic Press Brake

Gwf H 100-2

Germany

1992

used

on request

INNO26811

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

more

Screw Press

Gwf DFN 100

Germany

1992

used

on request

INNO26810

Compressive force: 1000kN/100t, lifting speed: 25/min, ram stroke: 230mm, power requirement: 5.5kW, safety distance: 640mm, stopping time: 400ms, weight: 4600kg. Has been overhauled once.

more

Press

Chappuis P.A.U. 2x20T

Germany

1965

used

on request

INNO26814

Power of parallel/offset crankshaft: 30t/2x20t, stroke: 50mm, clamping surface: 230mm/460mm, face of tappets: 2x 30mm/110mm, average of clamping journals: 38mm. Max./min. Opening front dead center: 240mm/180mm, ejection distance: 24mm. Max./min. Band width: 80(100)mm/10(5)mm, max. feed: 120mm. Running speed: 60-180rpm, drive pulley diameter: 180mm, gear reduction: 1:4, documentation available.

more

CNC Lathe

Index GU 1400

Germany

1991

used

on request

INNO26813

Center distance: 1400mm, swing diameter over bed: 540mm, swing diameter over slide: 320mm, travel Z/X: 1470mm/310mm, spindle bore: 103mm, speed range: 4000rpm, control: Index C200. Dimensions X/Y/Z: 4000mm/1300mm/1400mm, weight: 8000kg. Documentation available.

more

CNC Circular Grinding Machine

Studer S36 CNC

Germany

2006

used

on request

INNO26812

Number of axes: 3, center height: 175mm, distance between centers: 1000mm, grinding length: 500mm, strokes X/Z: 267mm/650mm. Continuous orientation: +/-8.5°, Outer grinding wheel dimensions X/Y/Z: 500mm/80mm/203mm. Cutting speed: 44m/s, taper type: CM5, C-axis: +/-0.5°, speed: 1000rpm. Tailstock: taper type: CM3, quill stroke: 35mm, quill diameter: 50mm, max. piece weight between centers: 130kg. Dimensions X/Y/Z: 2700mm/2350mm/2100mm, weight: 4000kg, operating hours: approx. 28000h. Tailstock (hydraulic clamping cylinder and clamping spring) recently overhauled. Documentation available.

more

A reliable partner at your side for used machinery from Germany