Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [2181 - 2200 of 2870]

Multi Blade Circular Saw

Paul Machinenfabrik K34G 0/1200

Germany

2006

used

on request

INNO27290

Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible.

CNC Turning and Milling Machine

Kekeisen VFB 2000

Germany

2012

used

on request

INNO27282

Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible.

Automated Optical Inspection Machine

Göpel Opticon BasicLine NP

Germany

2009

used

on request

INNO27266

Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available.

SMT Feeder

Feeder Rüttelfeeder/8mm-44mm

Germany

unknown

used

on request

INNO27262

Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages.

Placement System

Zevatech/juki/dek FS730/FM740/TR4NEZ/265

Germany

1995

used

on request

INNO27261

A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available.

Sewing Machine

Pfaff/adler/global 2-Nadel

Germany

unknown

used

on request

INNO27246

There are 5 sewing machines available: 1) Pfaff linking machine with elastic and 2-needle flatbed for fitted sheets, 2) Pfaff 1446 2-needle flatbed sewing machine for gathering, 3) Adler 204-4102 S beading machine, 4) Pfaff 1422 2-needle flatbed sewing machine for zippers and 5) Global LP 9226 LH-SNB 2-needle column sewing machine with double seam.

Injection Moulding Machine

Arburg 320C 600-250/ 420C 1000-250/ 270C 300-100

Germany

2007

used

on request

INNO27241

Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible.

CNC Machining Center

Axa DBZ 2

Germany

2012

used

on request

INNO27230

Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available.

Reach Truck

Jungheinrich ETV 214

Germany

2003

used

on request

INNO27228

Load capacity: 1400kg, total width: 1270mm, overall height: 3300mm, tires: polyurethane, load center: 600mm, voltage: 48V, traction motor power: 6kW, tare weight: 2736kg, battery weight: 750kg, lifting height: 10.25m, turning radius: 1613mm, travel speed: 14km/h, operating hours: 13573h. Charger included. Documentation available.

Injection Moulding Machine

Boy 55M

Germany

2005

used

on request

INNO27212

There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included.

Milling Machine

Steinel BZ20

Germany

1982

used

on request

INNO27209

Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.

CNC Vertical Machining Center

Mazak AJV 60/120

Germany

1990

used

on request

INNO27196

Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible.

CNC Milling Machine

Mazak FH 880

Germany

1997

used

on request

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.

Row Drilling Machine

Elu S156

Germany

1976

used

on request

INNO14814

Number of drilling heads: 4.

Injection Moulding Machine

Arburg 221/55-250

Germany

1979

used

on request

INNO27186

Clamping force: 25kN, injection force: 5.7kN, screw motor: 12Nm, heating: 3.4kW.

CNC Lathe

Monforts RNC 200 A

Germany

2000

used

on request

INNO27182

Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available.

Tube Furnace

Thermconcept ROHT 50/200/17

Germany

2018

used

on request

INNO27169

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

Tube Furnace

Thermconcept ROK 70/500/11

Germany

2023

used

on request

INNO27168

A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available.

Mixing Vessel

Hermann Rothenburg Rühr- und Mischkessel

Germany

1976

used

on request

INNO27157

A Hermann Rothenburg stirring and mixing vessel is available. Operating pressure vessel/jacket: 2bar/0.5bar, volume vessel/jacket: 1000l/180l, max. temperature vessel/jacket: 180°C/180°C. On-site inspection is possible.

Storage Tank

Tuchenhagen

Germany

unknown

used

on request

INNO27140

Various heating oil, VA containers and VA tanks are available. 1) Vertical VA tank with 5 feet, volume: 40m³, diameter: approx. 2500mm, height: approx. 6000mm. 2) Vertical VA tank with 5 feet, volume: 25m³, diameter: approx. 2500mm, height: approx. 4000mm. 3) Vertical VA tank with 5 feet, volume: 35m³, diameter: approx. 3000mm, height: approx. 5000mm. 4/5) Two double-walled VA tanks, volume: 50m³, diameter: approx. 3800mm, height: approx. 5500mm. Including agitator. 6) Transport tank mounted on container frame with 3 separate chambers, chamber volume: 4m³, total volume: 12m³, drain: central, cleaning: via spray heads. 7) Heating oil tank, volume: 30m³, diameter: approx. 2500mm, length: approx. 8000mm. 8) Heating oil tank, volume: 10m³, diameter: approx. 2000mm, length: approx. 4000mm. A further 7 (8-14) partly mobile V2A tanks with volumes from 1m³ to 11m³. A further 5 built-in VA sheet metal storage tanks, each with a volume of 20m³. Documentation available. On-site inspection is possible.