▷ Używane maszyny do obróbki drewna z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Maszyny do obróbki drewna [1 - 20 of 99]

Maszyna do łączenia forniru

Kuper FW 1150

Niemcy

1990

używany

na żądanie

INNO31889

A Kuper zigzag veneer splicing machine is offered. Overhang: 1150mm, working width: 1150mm, veneer thickness range: approx. 0.3mm-3mm, feed rate: approx. 10-30m/min, feed drive power: 0.55kW, working height: approx. 980mm, machine dimensions X/Y/Z: approx. 2160mm/780mm/1650mm, weight: approx. 540kg. Documentation available. Inspection possible by appointment.

Okleiniarka

Ima Combima Systems I/R751220/R3

Niemcy

2005

używany

na żądanie

INNO31822

A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible.

Szlifierka do krawędzi i profili

Arminius SE-32

Niemcy

1994

używany

na żądanie

INNO31811

A modular profile and edge belt sanding machine is offered for sanding solid wood and veneered edges in continuous operation. Feed rate: 5-25m/min, Units: 5, Workpiece thickness range: 12mm-60mm, Conveyor chain: 80mm, Sanding belt length: 2000mm, Sanding belt width: 20mm/35mm, Belt speed: approx. 7m/s, Max. working radius: 12mm. Machine dimensions: approx. 2670mm/1200mm/1800mm. Weight: approx. 1200kg. Documentation available. Inspection possible by appointment.

Linia do obróbki krawędzi

Ima Combima K/II/R75-3.1/975/F/R3/ AVM K/I/680/865/R3

Niemcy

1997

używany

na żądanie

INNO31809

A 1.5-times linked IMA edge processing line with automatic Venjakob workpiece transfer is offered. Max. working width: 2500mm, transfer angle: 90°, distance between the workpiece edges: 6000mm. Control system: Siemens S5. Including peripheral equipment and conveying system. Required installation space: approx. 250-300m², overall dimensions X/Y: approx. 19000mm/13600mm. IMA. Operator PC: renewed in 2018. Inspection possible by appointment.

Instalacja natryskowa

Venjakob HGS-Z/PC

Niemcy

1998

używany

na żądanie

INNO31802

An automatic Venjakob flat surface spray coating system is available. Coating material: water-based coating, working width: 1300mm, max. passage height: 70mm, working height range: 880mm-920mm, min. workpiece dimensions X/Y: 100mm/200mm, max. workpiece dimensions X/Y: 1200mm/3000mm, max. coating material pressure: 200bar, working speed: 3m/min. An on-site inspection is possible.

Rozdrabniacz bębnowy

Vecoplan VTH 85/20/3 VU

Niemcy

2006

używany

na żądanie

INNO31726

A robust wood shredder is offered. Infeed width: 850mm, drive power: 90kW, rotor type: U-rotor, number of knife crowns: 45, motor speed: 1480rpm, control system: PLC. Equipped with control cabinet, U-rotor with 45 knife crowns, Holtec vibrating conveyor trough type DS 750 X/Y: 750mm/18500mm. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3800mm/1700mm/1400mm. Inspection possible by appointment.

Tartak

Baljer & Zembrod/linck/vollmer Asterix/U 71/CNE

Niemcy

1998

używany

na żądanie

INNO31706

A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible.

Prasa do forniru

Siemens K2012

Niemcy

1964

używany

na żądanie

INNO31701

A Siemens high-frequency veneer and gluing press is available. Pressing force: 100t, high-frequency power: 6kW, press area X/Y: 2000mm/1200mm. An on-site inspection is possible.

Dwustronna formatyzerka krawędzi

Ima FBA/II/260

Niemcy

1985

używany

na żądanie

INNO31651

An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Automatyczne centrum obróbki profili

Urban AP 6500 F

Niemcy

2012

używany

na żądanie

INNO31617

Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip tray, 6 removable chip drawers, pendulum operation for normal table, protection by light barrier, device for efficient production of series parts, machine table with separating discs for 900mm safety zone, spray mist device, tank capacity: approx. 1l, laser technology, retrofit AP6500 HK laser technology. Control: HEIDENHAIN iTNC530, length: 8000mm, width: 2400mm, height: 2450mm, weight: 4.5t, with documentation. An on site inspection is possible.

Suszarnia do drewna

Mühlböck MB 4000

Niemcy

nieznany

używany

na żądanie

INNO31517

Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible.

Prasa korpusowa

Pritelli Engineering PE 83

Niemcy

1985

używany

na żądanie

INNO31338

A continuous cabinet press Pritelli is available. Press length: approx. 2500mm, press height: approx. 1300mm, press depth: approx. 680mm, pressure shoes vertical horizontal: 2/3, rated power: 7kW. Machine dimensions X/Y/Z: approx. 7000mm/2400mm/2950mm, weight: approx. 2800kg. An on-site inspection is possible.

Piła tarczowa

Holzmann TS 400Z

Niemcy

2021

używany

na żądanie

INNO31260

A Holzmann table saw including an outrigger for carpentry operation is available. Blade speed: 2800rpm, turntable rotation: 90°, blade adjustment: 45°, motor power S1/S6: 2800W/4200W, table height: 845mm, table dimensions X/Y: 715mm/945mm, max. cutting height 45°/90°: 90mm/120mm. Machine dimensions X/Y/Z: approx. 1350mm/1100mm/1200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible.

Prasa do formowania

Italpresse GL/160PS Special

Niemcy

1999

używany

na żądanie

INNO31179

A molded part press Italpresse for the woodworking and furniture industry is available. Motor power: 160hp, Press force: approx. 160t, Cylinders: 2, Weight: approx. 17600kg. An on-site inspection is possible.

Prasa do formowania

Italpresse GL 14-6/180

Niemcy

2007

używany

na żądanie

INNO31178

A heated plate press Italpresse is available. Press force: 180t, max. hydraulic pressure: 600bar, cylinder stroke: 325mm, opening: 325mm, max. temperature: 300°C. An on-site inspection is possible.

Prasa do formowania

Italpresse BG/660

Niemcy

nieznany

używany

na żądanie

INNO31099

A heated platen forming press Italpresse in bottom piston design is available. Press force: 660t, platen dimensions X/Y: 1900mm/1600mm, heating power: 31kW, connected load: 108kW, rapid stroke cylinder diameter: 70mm, weight: approx. 28000kg. Documentation available. An on-site inspection is possible.

Tartak

Costa/esterer/zeno/zimac Leonard/WD/HD30

Niemcy

1993

używany

na żądanie

INNO31090

Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible.

Centrum obróbcze CNC

Homag PROFI BMG512/74/15/F/A

Niemcy

2014

używany

na żądanie

INNO30977

A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible.

Wiertarka do otworów pod kołki

Ganomat DS-75

Niemcy

1991

używany

na żądanie

INNO30956

Drilling depth: 60mm, min. workpiece width: 800mm, max. workpiece length: 2500mm, workpiece height range: 10mm-60mm, machine dimensions X/Y: 1400mm/1400mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.

Urządzenie podnoszące

Schmalz Jumbo 65

Niemcy

2000

używany

na żądanie

INNO30955

A Schmalz vacuum hose lifter is available: load capacity: 65kg, load capacity at 90°: 40kg, lifting hose diameter: 160mm, max. lifting speed: 60m/min, lifting height: 1700mm. An on-site inspection is possible.