▷ Używane urządzenia pomiarowe i testowe z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Urządzenia pomiarowe i testowe / Systemy pomiarowe

Inne maszyny 7 Maszyny do wyważania 1 Stoły testowe 1 Systemy pomiarowe 25 Testowanie materiału 14 Współrzędnościowe maszyny pomiarowe 35

Innovac maszyny-uzywane

Systemy pomiarowe [1 - 20 of 25]

System hydrolizy kwasowej

Gerhardt HT6 V02

Niemcy

nieznany

używany

na żądanie

INNO32545

An automated acid hydrolysis system for fat determination with 6 sample positions is offered. Sample configuration: 3 chambers with 2 tubes each. Degree of protection: IP20. The system is designed for automated acid hydrolysis for fat determination. The process takes place in an enclosed room. Inspection possible by prior arrangement.

Spectrophotometer

Colorlite sph91

Niemcy

2023

używany

na żądanie

INNO32535

Standard observers: 2° (1931) and 10° (1964), standard illuminants: D65, D55, F11, A, C, color spaces/values: XYZ, Yxy, LCh*, Luv*, ΔE CIE Lab*, ΔE CIE94, ΔL*, Δa*, Δb*, yellowness index according to DIN 6167 or whiteness metrics, spectral range: 400-700nm, spectral resolution: 10nm (internally 3.5nm), spectrometer: holographic grating spectrometer, display: relative values, absolute values or customer-specific values, repeatability: ΔE = 0.05 CIE Lab, repeatability test: 10 measurements of the supplied white standard, memory: non-volatile, more than 1,500 measurements without a PC, ambient temperature: 15-35°C, max. relative humidity: 85%, non-condensing, PC interfaces: USB, RS232, current output: 4-20mA, length: 235mm, width: 220mm, height: 60mm, weight: 1.85kg, including original operating manual, USB flash drive with installation file for "ColorDaTra_IPM" software version 1.94, installation file for update to version 1.95 and license key, last calibrated in 2025. On-site inspection is possible.

Kamera plenoptyczna

Raytrix R42

Niemcy

2017

używany

na żądanie

INNO32495

Offered for sale is an industrial 3D camera with light field technology. Equipped with a RICOH lens and custom-fit transport case with foam insert. The camera is offered in fully functional condition. Inspection possible by prior arrangement.

Urządzenie do pomiaru fal

Ibb Technology PREMION M 318-1408-1200

Niemcy

2018

używany

na żądanie

INNO32226

A manual shaft measuring device for measuring shafts and rotationally symmetrical workpieces and for determining various form, position, length and diameter parameters is offered. Measuring length: 1200mm, max. workpiece diameter: 200mm, max. workpiece weight: 50kg, measuring method: manual, software: PREMION measuring software, operating system: Windows 11. Equipment: PC with monitors, keyboard and mouse, manual length and diameter module, centering tips and additional measuring accessories, PC replaced and equipped with Windows 11. Weight: 250kg. An on-site inspection is possible.

Urządzenie do pomiaru wstępnego ustawienia narzędzi

Gildemeister-de Vlieg Microset EGS-1535-001 / Orion-2

Niemcy

1990

używany

na żądanie

INNO32153

Offered for sale is a Gildemeister tool presetter. Max. tool diameter: approx. 350mm, max. tool length: approx. 350mm, tool holders: ISO 40 / ISO 50. Foot pedal included. The control was replaced with Orion in 2021. Calibration and maintenance in 2023. Dimensions X/Y/Z: approx. 1100mm/650mm/840mm. An on-site inspection is possible.

System pomiarowy

Faro Edge / LLP HD

Niemcy

2015

używany

na żądanie

INNO32141

A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible.

Miernik wilgotności resztkowej

Brabender Aquatrac Station 822000

Niemcy

2021

używany

na żądanie

INNO31920

A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resolution: 0.0001%H₂O, measuring temperature range: 30°C-160°C, temperature setting: in 1°C increments, sample weight: approx. 0.05g-20g, max. sample volume: approx. 50cm³, accuracy: better than approx. 0.6mg, ambient temperature: +10°C to +45°C, relative humidity: 5%-95%, storage temperature: -20°C to +55°C, relative humidity: 5%-95%, measuring distance: approx. 1m, measuring height: approx. 1.6m. Dimensions X/Y/Z: 562mm/420mm/275mm, weight: 27.6kg. Documentation available. Inspection possible by appointment.

CNC Video-Messmikroskop

Garant MM2 CNC

Niemcy

nieznany

używany

na żądanie

INNO31653

X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) at 20°C ±1K, tactile length measurement error (MM2/TP20): 4 + L/75µm (L in mm), optical lens: 1.5x, screen magnification: 47-80x, field of view: 4.5x3.5mm, camera: 1.3 megapixel CMOS with autofocus. Equipment: 3-axis CNC control via servo drives and joystick, IK 5000 measuring software, IK 5000 measuring computer for 2D and 3D geometric measurements, integrated CAD module for DXF and IGES data, automatic fit routine for comparison of freeform contours, scaling routine, tolerance inspection according to DIN ISO 1101, data export to Microsoft Office or to databases/SPC/QS systems via ODBC interface, report generator for user-defined measuring tasks, storage of executed actions as measuring macros. An on-site inspection is possible.

Urządzenie do wstępnego ustawiania narzędzi

Royal Basic

Niemcy

2004

używany

na żądanie

INNO31447

A tool presetting device is offered. Axes: 2 (X/Z), position display: EPA 3001 2-axis LED display, tool holder: SK steep taper, projection measuring head with sighting device, pneumatic tool clamping, integrated compressed air maintenance unit including pressure gauge, fine adjustment via handwheels, zero point storage, measured value hold function. Weight: approx. 95kg, overall dimensions X/Y/Z: approx. 600mm/550mm/1100mm. Inspection possible by arrangement.

Przepływomierz

Krohne Optimass 6400 F

Niemcy

2019

używany

na żądanie

INNO30785

A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200l/h. 5) Sensor: Optimass 6000-S15, connection DN25 Tri-Clamp, installation length: 480mm, max. measuring range: 0l-1500l/h. Position 5 was installed solely for testing purposes. Documentation available. An on-site inspection is possible.

Urządzenie pomiarowe

Man 200KN/9606

Niemcy

1984

używany

na żądanie

INNO30394

Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment.

Urządzenie pomiarowe

Amsler Wolpert 40 THZ – 400KN

Niemcy

1979

używany

na żądanie

INNO30392

Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement.

Optyczny system pomiarowy

Keyence IM-6120

Niemcy

nieznany

używany

na żądanie

INNO30243

An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible.

Wizyjny system pomiarowy CNC

Mitutoyo QS-250Z

Niemcy

2001

używany

na żądanie

INNO29618

A CNC image processing and measuring device Mitutoyo is available. Travel X/Y/Z: 200mm/250mm/100mm, accuracy: 5µm, resolution: 0.5µm, travel speed: 80mm/s, acceleration: 250mm/s², glass table dimensions X/Y: 269mm/311mm, max. workpiece weight: 10kg, weight: approx. 70kg, control: QSPAK Version 3.1. Documentation available. An on-site inspection is possible.

Analizator wielkości cząstek i potencjału zeta

Malvern ZEN 2600

Niemcy

2013

używany

na żądanie

INNO29164

A measuring device for the characterization of particles, emulsions, colloids and biomolecules in liquids is available. Laser power: 4mW, wavelength: 632.8nm, primary measurement function: zeta potential measurement, particle size measurement range: 3.8nm-100µm, software compatibility: Zetasizer v8.01 with GAMP5 conformity. Zeta potential measuring range: +/-500mV, measuring principle: DLS and laser Doppler electrophoresis, min. sample volume: 12µL, measuring angle range: 13°-173°. Machine dimensions X/Y/Z: approx. 500mm/300mm/240mm, weight: approx. 15kg. Including 2x used and 1x brand new flasks. The machine was serviced in 2024. Documentation available. On-site inspection is possible.

Optyczny system pomiarowy

Keyence LS-9000

Niemcy

nieznany

używany

na żądanie

INNO28859

Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible.

Urządzenie do pomiaru okrągłości

Mitutoyo RA-426/436

Niemcy

2001

używany

na żądanie

INNO28642

A Mitutoyo roundness analysis system without monitor is available. Rotation accuracy: 0.02 + 0.0006H, rotation speed: 2/4/6/8/10 rpm, max. workpiece weight: 30kg, max. workpiece diameter: 500mm, machine weight: approx. 200kg, control: Roundpak-400, version: 3.002. Documentation available. On-site inspection is possible.

System pomiaru masy powierzchniowej

Scantech HF3 XT10

Niemcy

2022

używany

na żądanie

INNO28151

A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible.

Maszyna pomiarowa multisensorowa

Mahr MarVision MS662

Niemcy

nieznany

używany

na żądanie

INNO27836

Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.

Jednorazowy makroskop pomiarowy 3D

Keyence VR-3050

Niemcy

nieznany

używany

na żądanie

INNO18164

Max. magnification: 50x, measuring height: 10mm, connected load: 150VA, weight: 29.5kg.