Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Measurement and testing
Local positioning technology 22 Material testing 17 Measuring systems 15 Other machinery 10 Test bench 1
Innovac used-machines Measurement and testing [1 - 20 of 65]
Rheometer-Alpha-Technologies-RPA-2000 used
Rheometer
Alpha Technologies RPA 2000
Germany
unknown
used
on request
INNO30176
An Alpha rubber process analyzer for testing the rheological and dynamic properties of elastomers and rubber compounds is available. Frequency range: 0.1-3000cpm, max. temperature: 230°C, max. heating rate: 1°C/s, max. cooling rate: 0.5°C/s, max. strain: +/-90°, test standards: ASTM D5289/D6048/D6204/D6601/D7050/D7605/D8059. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Including PC with Eclipse software and spare parts. Documentation available. On-site inspection possible.
more
Mooney-Viscometer-Alpha-Technologies-MV2000 used
Mooney Viscometer
Alpha Technologies MV2000
Germany
unknown
used
on request
INNO30175
An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.
more
Rheometer-Alpha-Technologies-MDR-2000 used
Rheometer
Alpha Technologies MDR 2000
Germany
unknown
used
on request
INNO30174
A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.
more
Network-Analyzer-Hp-8753D-3325A used
Network Analyzer
Hp 8753D/3325A
Germany
unknown
used
on request
INNO30142
Several vector network analyzers and one synthesizer-based HP function generator are available. 1) 3x HP 8753D, frequency range: 30kHz-6GHz, option: 006, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 2) 6x HP 8753D, frequency range: 30kHz-3GHz, option: Standard, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 3) HP 3325A, max. frequency range: 21MHz, resolution: 1µHz, max. amplitude: 10V. Machine dimensions X/Y/Z: approx. 450mm/150mm/450mm, weight: approx. 15kg. All devices were calibrated in 2019. Documentation available. On-site inspection possible.
more
X-ray-Inspection-System-Mekitec-Meki-D4 used
X-ray Inspection System
Mekitec Meki D4
Germany
2015
used
on request
INNO30074
An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.
more
Single-Flank-Testing-System-Gleason-13-Zoll-Power-Gear-T. used
Single Flank Testing System
Gleason 13-Zoll Power Gear T.
Germany
2005
used
on request
INNO30030
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
more
Drying-and-Warming-Cabinet-Binder-ED-400-KBF-115 used
Drying and Warming Cabinet
Binder ED 400/KBF 115
Germany
unknown
used
on request
INNO30014
Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible.
more
Drop-Tester-Lansmont-PDT-80M used
Drop Tester
Lansmont PDT 80M
Germany
unknown
used
on request
INNO30012
A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.
more
Spectrophotometer-Datacolor-800 used
Spectrophotometer
Datacolor 800
Germany
2020
used
on request
INNO30007
A color measurement device Datacolor is available. Measurement geometry: d/8°, illumination system: Dual, integrating sphere diameter: 152mm, wavelength range: 360nm-700nm, wavelength resolution: 2nm, measurement interval: 10nm, photometric range: 0%-200%, spectral analyzer: SP2000. Machine dimensions X/Y/Z: approx. 320mm/340mm/420mm, weight: approx. 17kg. Documentation available. An on-site inspection is possible.
more
Hardness-Testing-Machine-Mitutoyo-Durotwin-Plus-963 used
Hardness Testing Machine
Mitutoyo Durotwin Plus 963
Germany
unknown
used
on request
INNO29919
Scales: Rockwell/Rockwell Superficial, max. workpiece height: approx. 180mm, max. test depth: approx. 165mm, dwell time: approx. 3s, data output: Digimatic/RS-232-C, machine dimensions X/Y/Z: approx. 250mm/520mm/780mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible.
more
Universal-Oven-Memmert-UF30 used
Universal Oven
Memmert UF30
Germany
2020
used
on request
INNO29819
Operating temperature: 10-300°C, setting temperature: 20-300°C, setting accuracy: up to 99.9°C: 0.1°C, from 100°C: 0.5°C, temperature sensor: 1x Pt100 DIN class A, 4-wire measurement, control: Control COCKPIT Single DISPLAY, digital PID microprocessor controller with TFT color display, timer: 1 minute to 99 days, functions: SetpointWAIT, calibration of 3 temperature values, parameter selection (temperature, circulating air motor, exhaust air, program runtime, time zones), electronically controllable air turbine adjustable in 10% steps, fresh air via adjustable exhaust flap with preheating, exhaust port with throttle valve electronically controllable, logging: storage in case of power failure, programming: data logger evaluation via Ethernet, AtmoCONTROL software optional via USB, safety: electronic temperature monitoring, mechanical limiter TB, protection class 1 (DIN 12880), self-diagnosis system, internal dimensions: 400x320x250mm, volume: 32l, max. inserts: 3, max. load: 60kg, max. load per insert: 20kg, length: 650mm, width: 660mm, height: 890mm, weight: 45kg. The oven has hardly been used. An on-site inspection is possible.
more
Weight-Per-Unit-Area-Measuring-System-Scantech-ULO03 used
Weight Per Unit Area Measuring System
Scantech ULO03
Germany
2020
used
on request
INNO29768
A thickness measuring device Scantech is available. Measuring frame width: 2500mm, sensor power: 5keV-15keV, max. web width: 2100mm, max. web speed: 200m/min, product tolerance at 57µm-63µm: +/-5%, measuring accuracy at 60µm: +/-0.3µm, max. ambient temperature: 45°C, orientation: Left-B. Machine dimensions X/Y/Z: approx. 3250mm/300mm/900mm, weight: approx. 400kg, control: Flexscan 6, interface: OPC-UA. Components: scanner, HMI, IO box, and various small parts. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Schut-Geometrical-Metrology-DeMeet-400 used
CNC Coordinate Measuring Machine
Schut Geometrical Metrology DeMeet-400
Germany
2005
used
on request
INNO29759
X-axis: 400mm, Y-axis: 250mm, Z-axis: 200mm, table dimensions: 560x426mm, acceleration: 500mm/s², resolution: 0.1μm, measuring temperature: 20 ±0.5°C, max. workpiece weight: 50kg. Length: 930mm, width: 870mm, height: 1570mm, weight: 530kg. On-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-RSplus-1825 used
CNC Coordinate Measuring Machine
Wenzel RSplus 1825
Germany
2016
used
on request
INNO29683
Travel X/Y/Z: 4000mm/1800mm/2500mm, max. length measurement error: 55 + L/35, max. single-point error: 35, control: WPC 2040. Includes test head PH10M Plus, PHC10-3, sensor TP20, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Lk-Altera-M used
CNC Coordinate Measuring Machine
Lk Altera M
Germany
2023
used
on request
INNO29675
Travel X/Y/Z: 1000mm/1500mm/800mm, max. length measurement error: 1.5 + L/375, max. single-point error: 1.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LH-87 used
CNC Coordinate Measuring Machine
Wenzel LH 87
Germany
2012
used
on request
INNO29674
Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LH-87 used
CNC Coordinate Measuring Machine
Wenzel LH 87
Germany
2006
used
on request
INNO29673
Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LH-65 used
CNC Coordinate Measuring Machine
Wenzel LH 65
Germany
1999
used
on request
INNO29672
Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Coordinate-Measuring-Machine-Wenzel-LG-54 used
CNC Coordinate Measuring Machine
Wenzel LG 54
Germany
2001
used
on request
INNO29671
Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
more
CNC-Vision-Measuring-System-Mitutoyo-QS-250Z used
CNC Vision Measuring System
Mitutoyo QS-250Z
Germany
2001
used
on request
INNO29618
A CNC image processing and measuring device Mitutoyo is available. Travel X/Y/Z: 200mm/250mm/100mm, accuracy: 5µm, resolution: 0.5µm, travel speed: 80mm/s, acceleration: 250mm/s², glass table dimensions X/Y: 269mm/311mm, max. workpiece weight: 10kg, weight: approx. 70kg, control: QSPAK Version 3.1. Documentation available. An on-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 2
Automation-technology 61
Beverage-filling-technology 25
Complete-production-lines 1
Construction-machinery 24
Energy-management 127
Food-processing-and-beverage 130
Material-storage 66
Materials-handling-technology 62
Measurement-and-testing 65
Medical-equipment 6
Metal-processing-machines 979
Mining 3
Office-equipment 2
Other-machines 65
Packaging-machines 215
Pharmaceutical-and-cosmetics 17
Plastics-processing-machines 181
Printing-machines 75
Process-equipment-and-chemistry 155
Packaging-material-machinery 71
Robotics 36
Surplus-goods 5
Textile-machinery 93
Utility-vehicles 9
Woodworking-machines 84