▷ Używana inżynieria procesowa i zakłady chemiczne z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Inżynieria procesowa i zakłady chemiczne / Systemy filtrujące

Dekanter 1 Dmuchawy 3 Inne maszyny i urządzenia 15 Magazyny i zbiorniki 21 Mieszalnie 38 Młyny 12 Pompy 9 Prasy 1 Produkcja papieru 1 Sprężarki 26 Stacje uzdatniania wody 7 Systemy filtrujące 35 Wirówki 8

Innovac maszyny-uzywane

Systemy filtrujące [1 - 20 of 35]

Odciąg wiórów i filtr

Ivat Profi-Tower RS 28.000K

Niemcy

2019

używany

na żądanie

INNO31051

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Urządzenie wentylacyjne

Wolf KGXD 160

Niemcy

nieznany

używany

na żądanie

INNO31027

Supply air unit Wolf KGXD 160: air volume: 12,000m³/h, external pressure loss: 300Pa, heating capacity: 102.6kW, cooling capacity: 82.8kW, motor power: 7.5kW, rated current: 14.8/8.5A, speed: 1440rpm. Exhaust air unit Wolf KGXD 160: air volume: 12,000m³/h, external pressure loss: 300Pa, motor power: 5.5kW, rated current: 11.2/6.5A, speed: 1440rpm. System is fully functional, an on-site inspection is possible.

Urządzenie wentylacyjne

Wolf

Niemcy

2012

używany

na żądanie

INNO31026

Size supply air: Top 21, supply air volume: 1840m³/h, length: 3764mm, width: 712mm, height: 508mm, weight: 333kg. Equipment: pocket filter F7 (short pockets) with differential pressure switch, high air purification efficiency, heater section (long), high-performance heat exchanger for reliable heating, cooling section, prepared for external cooling supply including droplet separator, fan (standard version), energy-efficient and low-noise, empty section with flow distributor, for optimal airflow guidance, silencer type 12, effective noise reduction. Accessories: canvas connection, equipotential bonding, differential pressure switch. System is fully functional, condition very good. An on-site inspection is possible.

Jednostka ekstrakcyjna

Kiekens Dustmaster 4000

Niemcy

nieznany

używany

na żądanie

INNO30986

A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.

Filtr kasetowy

Sult PDMS 1/4

Niemcy

1998

używany

na żądanie

INNO30713

A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Urządzenie do odzyskiwania rozpuszczalników

Lömi LRA-50

Niemcy

1999

używany

na żądanie

INNO30676

An untested vacuum distillation unit/solvent recycling unit Lömi for the recovery of organic solvents is available. Volume: 50l, operating volume: 30l, distillation capacity range: 8l-20l/h, max. operating temperature: 250°C, protection: EX, vacuum pump type: LÖ/V 6, max. vacuum pressure: 80mbar. Machine dimensions X/Y/Z: approx. 1450mm/600mm/1800mm, weight: approx. 300kg. An on-site inspection is possible.

Instalacja filtrów powietrza

Trotec Tac 6500

Niemcy

2020

używany

na żądanie

INNO30588

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Prasy filtracyjne

Schenk Orion 60x60

Niemcy

nieznany

używany

na żądanie

INNO30572

A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.

Filtr osadowy

Faudi ASTAV 16-6

Niemcy

1993

używany

na żądanie

INNO30062

A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible.

Oczyszczacz powietrza

Crt Roomguard RG01

Niemcy

2020

używany

na żądanie

INNO30041

Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible.

Odciąg wiórów i filtr

Krämer VFM-P/VKA-P/VFM-R/GFS Shake 160 25 250

Niemcy

2009

używany

na żądanie

INNO30034

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Jednostka ekstrakcyjna

Lta DF 300 Jet

Niemcy

2018

używany

na żądanie

INNO29996

Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.

Jednostka ekstrakcyjna

Wolf KG 40

Niemcy

nieznany

używany

na żądanie

INNO29912

A Wolf exhaust unit for wet rooms is available. Air volume flow: 1000m³/h, pressure loss (external): 200Pa, motor power: 0.25kW, motor speed: 1500rpm. Documentation available. An on-site inspection is possible.

Jednostka ekstrakcyjna

Schmidt, Kranz & Co. Airator

Niemcy

nieznany

używany

na żądanie

INNO29748

A mobile welding fume extraction unit Schmidt & Kranz is available. Air flow rate: approx. 1800m³/h, power: 1.5kW. An on-site inspection is possible.

Jednostka ekstrakcyjna

Wieland VS-3 T

Niemcy

1987

używany

na żądanie

INNO29563

A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

Ściana natryskowa

Rippert RWS 5000

Niemcy

1997

używany

na żądanie

INNO29498

A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.

Jednostka ekstrakcyjna

Kemper CleanAirTower SF 5000

Niemcy

2019

używany

na żądanie

INNO29338

An unused Kemper extraction system for room ventilation in the production area is available. Filter class: H10, Filter method: Storage filter, Filter material: Nano-Cellulose, Separation efficiency: 99.9%, Dust class: M, Volume flow: 5000m³/h, Motor power: 3.35kW, Filter area: 50m². Machine diameter: approx. 1200mm, machine height: approx. 2700mm, weight: approx. 420kg, operating hours: 1h. Documentation available. On-site inspection is possible.

Instalacja odpylania na mokro

Ulrich Venturi

Niemcy

2021

używany

na żądanie

INNO28789

A wet extraction system Ulrich Anlagen und Industrieservice is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, particle size: less than 1µm, separation efficiency: 97.5%, control system: Siemens S7. Including buffer tank, Almatec AHS 25 heavy-duty membrane pump, MSE 470-30 chamber filter press, working platform, stainless steel filtrate tank and discharge and cross conveyor screw. Documentation available. On-site inspection is possible.

Jednostka ekstrakcyjna

Nederman Filterkasten

Niemcy

2015

używany

na żądanie

INNO28787

A Nederman filter box extraction system is available. Filter: activated carbon, filter type: F7/F9/F11/activated carbon 1/activated carbon 2, power: 20kW, machine dimensions X/Y/Z: approx. 5000mm/2500mm/1500mm. Including steel frame, piping and extraction hoods. Documentation available. On-site inspection is possible.

System odpylania

Fav/intensiv-filter FSR/RM 50-N-60/RM 28-N-45

Niemcy

2019

używany

na żądanie

INNO28692

A dust extraction system is available. 1) Filter unit FAV FSR219/200-FDK, year of construction: 2019. 2) Fan intensive filter RM 50-N-60, air volume flow: 20000m³/h. 3) Intensive filter fan RM 28-N-45, air flow rate: 6900m³/h. 4) Fan intensive filter RM 50-N-60, air flow rate: 20000m³/h. Documentation available. On-site inspection is possible.