▷ Używana inżynieria procesowa i zakłady chemiczne z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Inżynieria procesowa i zakłady chemiczne

Dekanter 1 Dmuchawy 4 Inne maszyny i urządzenia 14 Magazyny i zbiorniki 21 Mieszalnie 34 Młyny 11 Pompy 9 Prasy 1 Produkcja papieru 1 Sprężarki 26 Stacje uzdatniania wody 7 Systemy filtrujące 37 Wirówki 8

Innovac maszyny-uzywane

Inżynieria procesowa i zakłady chemiczne [1 - 20 of 174]

System mieszania

Mixaco CM1000-D

Niemcy

2002

używany

na żądanie

INNO31096

A double column cold mixing system Mixaco is available. Material: steel, usable volume: 800l, motor power: 30kW, mixing vessel: conical, mixing blades: dispersion blades, machine dimensions X/Y/Z: 2900mm/2850mm/3500mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible.

System mieszania

Wam MESC 300

Niemcy

2023

używany

na żądanie

INNO31073

A continuous twin-shaft paddle mixer WAM is available. Throughput capacity range: 5m³-12m³/h, max. liquid addition: 20%, material: 1.4404, process: mixing/conditioning/granulation/neutralization, weight: approx. 700kg. Documentation available. An on-site inspection is possible.

System mieszania

Wam WBHP 15000

Niemcy

2013

używany

na żądanie

INNO31072

A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible.

Mikser

Eirich R15/ RV 15

Niemcy

1996

używany

na żądanie

INNO31062

Suction capacity: 6m³, suction pressure: 20 mbar, mix outlet dimensions: 750x800mm. Includes documentation. On-site inspection is available.

Sprężarka wysokociśnieniowa

Bauer I 22.0-18.5

Niemcy

1995

używany

na żądanie

INNO31057

An HD piston compressor Bauer is available. Capacity: 800l/min, max. operating overpressure: 160bar, max. operating pressure: 2320psig, power: 18.5kW, speed: 1180rpm. Machine dimensions X/Y/Z: approx. 2200mm/1100mm/1450mm, weight: approx. 750kg. An on-site inspection is possible.

Odciąg wiórów i filtr

Ivat Profi-Tower RS 28.000K

Niemcy

2019

używany

na żądanie

INNO31051

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Stacja mieszania

Cavicchi 180RC

Niemcy

1991

używany

na żądanie

INNO31037

A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.

Urządzenie wentylacyjne

Wolf KGXD 160

Niemcy

nieznany

używany

na żądanie

INNO31027

Supply air unit Wolf KGXD 160: air volume: 12,000m³/h, external pressure loss: 300Pa, heating capacity: 102.6kW, cooling capacity: 82.8kW, motor power: 7.5kW, rated current: 14.8/8.5A, speed: 1440rpm. Exhaust air unit Wolf KGXD 160: air volume: 12,000m³/h, external pressure loss: 300Pa, motor power: 5.5kW, rated current: 11.2/6.5A, speed: 1440rpm. System is fully functional, an on-site inspection is possible.

Urządzenie wentylacyjne

Wolf

Niemcy

2012

używany

na żądanie

INNO31026

Size supply air: Top 21, supply air volume: 1840m³/h, length: 3764mm, width: 712mm, height: 508mm, weight: 333kg. Equipment: pocket filter F7 (short pockets) with differential pressure switch, high air purification efficiency, heater section (long), high-performance heat exchanger for reliable heating, cooling section, prepared for external cooling supply including droplet separator, fan (standard version), energy-efficient and low-noise, empty section with flow distributor, for optimal airflow guidance, silencer type 12, effective noise reduction. Accessories: canvas connection, equipotential bonding, differential pressure switch. System is fully functional, condition very good. An on-site inspection is possible.

Zbiornik magazynowy

Edelstahl

Niemcy

1996

używany

na żądanie

INNO31019

A stainless steel storage tank with an integrated agitator is available. Calibration: 1996, Volume: 2700l, Pressure: non-pressurized, Material: presumably V2A, Bottom outlet: DN50 milk pipe. An on-site inspection is possible.

Jednostka ekstrakcyjna

Kiekens Dustmaster 4000

Niemcy

nieznany

używany

na żądanie

INNO30986

A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.

Sprężarka

Atlas Copco GA37

Niemcy

2005

używany

na żądanie

INNO30942

A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.

Agregat hydrauliczny

Lippold BNK250/FCMP 200L

Niemcy

2012

używany

na żądanie

INNO30941

Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Sprężarka

Atlas Copco GA 22 VSD FF

Niemcy

2010

używany

na żądanie

INNO30932

Air flow rate: 4.22m³/min, max. operating pressure: 12.8bar, motor power: 22kW, weight: approx. 560kg, operating hours: over 61000h. Documentation available. An on-site inspection is possible.

Sprężarka

Atlas Copco GA 37 VSD/GA 50 VSD/GA 30

Niemcy

2007

używany

na żądanie

INNO30923

Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible.

Sprężarka

Boge C 15 LDR-350

Niemcy

2017

używany

na żądanie

INNO30908

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

System mieszania

Bohle PM 1000

Niemcy

2004

używany

na żądanie

INNO30902

A Bohle container mixer is available. Mixing load: 900kg, Container volume: approx. 800l, Usable filling degree: 85%, Mixer speed: 6rpm, Container diameter: 1100mm, Machine height: 2800mm. An on-site inspection is possible.

System mieszania

Konus

Niemcy

nieznany

używany

na żądanie

INNO30892

A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.

Wielofunkcyjna komora dozująca

Rampf MC-EASY

Niemcy

nieznany

używany

na żądanie

INNO30871

Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An on-site inspection is possible, not under power.

Wielofunkcyjna komora dozująca

Rampf MC-EASY

Niemcy

nieznany

używany

na żądanie

INNO30868

Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control by Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement and dispensing control by Beckhoff, with static 1K and 2K dispensing system. An on-site inspection is possible, not under power.