Used Metal processing machines from Germany

Tokarka wielowrzecionowa

Mori-say 6/32M

Niemcy

1997

używany

na żądanie

INNO26918

A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg.

więcej

Tokarka CNC

Takamaz X180

Niemcy

2010

używany

na żądanie

INNO26917

There are 4 identical Takamaz X180 CNC lathes available. Turning diameter: 210mm, turning length: 230mm, spindle bore: 51mm, speed: 3500rpm, number of axes: 3, tool positions: 12, chuck size: 8inch (Kitagawa B208, 200mm), control: Fanuc 0i-TC, weight: approx. 4000kg.

więcej

Tokarka CNC

Benzinger GOFuture-B1

Niemcy

2014

używany

na żądanie

INNO26916

A Benzinger high-precision CNC lathe is available. Travel X/Y: 370mm/250mm, feed force X/Y: 3500N, rapid traverse X/Y: 45m/min, speed: 6000rpm, spindle diameter: 26mm, tool positions: 8, control: Sinumerik 840DSL. Dimensions X/Y/Z: approx. 2000mm/1650mm/2050mm, weight: approx. 3500kg. Documentation available.

więcej

Centrum obróbcze profili CNC

Maka PA 37

Niemcy

2006

używany

na żądanie

INNO26915

Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available.

więcej

Centrum obróbcze do blach

Schlebach Quadro TP/EZT 12050 RS 10

Niemcy

nieznany

używany

na żądanie

INNO26912

Several Schlebach machines are available for complete thin sheet processing. 1) Profiling machine Quadro TP without cassettes, infeed width: 300mm-8000mm, control: Schneider Magelis. Including electronic length measurement, motor-driven roller knife for cross-cutting, documentation and spare parts list. 2) Infeed table EZT 12050 RS 10 with pivoting roller cutter (max. +10°). Length measurement min.: 1000mm, speed: 10m/min, infeed width: 1250mm, max. capacity non-ferrous metals/sheet steel/stainless steel sheet: 0.80mm/0.70mm/0.50mm. Documentation available. 3) Decoiler 2/600, max. coil width: 600mm, max. coil weight: 2000kg, max. coil inner diameter: approx. 510mm, max. coil outer diameter: approx. 1500mm. Documentation available. 4) Pair of exchangeable cassettes for Quadro, stations: 12, swivel capability: no, special profiling for non-ferrous metals with 0.5mm thickness. Documentation available for all machines.

więcej

Prasa do gięcia krawędzi CNC

Trumpf TrumaBend V170

Niemcy

1997

używany

na żądanie

INNO26911

Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available.

więcej

Tokarka wielowrzecionowa

Giledemeister GMC20 ONE

Niemcy

2010

używany

na żądanie

INNO26919

Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline.

więcej

Prasa do gięcia krawędzi CNC

Eht EHPS 25-40

Niemcy

1994

używany

na żądanie

INNO26909

Pressing force: 2500kN, working length: 4050mm, oil volume: 390l, control: DNC 70 PSG, overrun time: 55ms, overrun distance: 9.4mm, safety distance: 88mm. Weight: approx. 20000kg.

więcej

Centrum obróbcze CNC

Brother TC-S2C-O

Niemcy

nieznany

używany

na żądanie

INNO26904

Control: Brother CNC B00, axes: 4, speed: 10000 rpm, Travel X/Y/Z: 700mm/400mm/300mm, table dimensions X/Y: 800mm/320mm, max. workpiece weight: 200kg, tool capacity: 21, tool holder: BT30. Dimensions X/Y/Z: approx. 2800mm/2200mm/2300mm, weight: approx. 2800kg.

więcej

Frezarka CNC

Union Bielefeld BF 650 U II-H

Niemcy

1987

używany

na żądanie

INNO26903

Travel X/Y/Z: 2000mm/1250mm/1000mm, table size X/Y: 2500mm/1000mm, max. table load: 6000kg, speed: 3000rpm, tool holder: ISO50, feed speed: 4000mm/min, rapid traverse: 8000mm/min. Gearbox/clutch not functional.

więcej

Wykrawarka CNC

Edel Novocut 210

Niemcy

1994

używany

na żądanie

INNO26910

Pressing force: 200kN, sheet size X/Y: 2000mm/1000mm.

więcej

Prasa dziurkująca

Edel Stanzmaster 40

Niemcy

1985

używany

na żądanie

INNO26882

Pressing force: 400kN, throat depth: 520mm, dimensions X/Y/Z: 1800mm/1000mm/1900mm, weight: approx. 2600kg. Documentation available.

więcej

Odciąg trocin

Ringler RE 201

Niemcy

2007

używany

na żądanie

INNO26887

A Ringler suction system with 2 Ringler motors is available. On-site inspection is possible.

więcej

Frezarka

Alcor 200

Niemcy

1990

używany

na żądanie

INNO26886

There are 2 identical Alcor 200 milling machines with 3 hydraulic vices available. Travel X/Y/Z: 750mm/450mm/540mm, spindle speed: 2010rpm, table dimensions X/Y: 1000mm/450mm, spindle: ISO40, coolant and lubricant device, weight: approx. 3000kg per machine. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Yamazaki Mazak AJV-35/60

Niemcy

1988

używany

na żądanie

INNO26880

Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg.

więcej

Składarka CNC

Ras 74.30

Niemcy

2004

używany

na żądanie

INNO26881

Working width: 3200mm, max. sheet thickness at 400N/mm² with bending tool width 30mm: 4mm, min. bending radius: 1.25xsheet thickness, min. inner flange height: approx. 6xsheet thickness. Inner flange height: approx. 6xsheet thickness. Max. Opening height of upper beam: 400mm, max. adjustment range of bending and lower beam: 80mm, bending angle: 0°-180°, max. bending speed: 74°/s. Clamping speed upper beam DOWN/UP: 40mm/92mm, weight: approx. 5500kg, control: RAS System 6000, documentation available.

więcej

Prasa ręczna

Otto Kaiser

Niemcy

nieznany

używany

na żądanie

INNO26871

There are 5 identical Otto Kaiser Pforzheim foot-operated toggle presses available. The pressing force is probably 120 kN.

więcej

Laserowa prasa wykrawająca

Trumpf TruMatic 6000

Niemcy

2013

używany

na żądanie

INNO26865

Max. Sheet thickness: 8mm, max. cutting force: 220kN, laser power: 2700W, C-axis punching: 330rpm, max. stroke rate marking: 2800rpm. Tool rotation: 360°, punching tool size: 76.2mm, max. tool change time: 0.3s, punching/laser part flap size: 500mm x 500mm. Documentation available.

więcej

Prasa do gięcia krawędzi

Hämmerle AP 200-3600

Niemcy

1991

używany

na żądanie

INNO26853

Pressing force: 2000kN, working width: 3600mm, max. stroke: 400mm, throat depth: 500mm, stops: 6, control: DNC 7000, weight: approx. 21000kg. Including various lower tools and dies with bolts as well as a holding rail. For example, prisms 7-90 and punches (straight and cranked) are included. Documentation is available. On-site inspection is possible.

więcej

Szlifierki do wałków

Schaudt PF 43 U-M 1000

Niemcy

1990

używany

na żądanie

INNO26846

Grinding length: 1000mm, center height: 180mm, max. external grinding diameter: 360mm, max. internal grinding diameter: 260mm, max. internal grinding depth: 300mm, max. workpiece weight: 200kg. B-axis on workpiece holder headstock: 0-180°, B-axis positioning: 0.001°, headstock stroke: 320mm, workpiece holder slide stroke(Z): 1300mm, grinding wheel: 500mm/60mm/100mm/203mm, speed: 20-45m/sec. Internal grinding spindle diameter: 120mm, quill stroke: 60mm, Speed: 1200rpm. Dimensions X/Y/Z: 4340mm/2250mm/2200mm, weight: approx. 7100kg, control: Siemens Sinumerik. Documentation available. On-site inspection is possible.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki