▷ Używane maszyny do produkcji opakowań z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Maszyny do produkcji opakowań

Inne maszyny 14 Klejarki do pudełek składanych 3 Kopertownice 9 Laminowanie linii 3 Maszyny do cięcia 14 Maszyny do produkcji torebek 6 Maszyny etykietujące 2 Maszyny nawijające 5 Maszyny perforowane 1 Płyta wykrawająca 2 Prasy 1 Produkcja i przetwarzanie tektury falistej 2 Składarki 2 Wykrawanie 8

Innovac maszyny-uzywane

Maszyny do produkcji opakowań [21 - 40 of 72]

Maszyna do pęcherzyków powietrza

Fromm AP 502

Niemcy

2012

używany

na żądanie

INNO29398

Output: 25-49 cycles/min, film material: PA/PE composite film or polyethylene film, cushion length range: 40mm-160mm, film width range: 420mm/767mm, max. roll diameter: 280mm, machine dimensions X/Y/Z: approx. 1600mm/800mm/1300mm, weight: approx. 230kg. Documentation available. On-site inspection is possible.

Maszyna do cięcia

Wohlenberg 115 MCS-2 TV

Niemcy

1985

używany

na żądanie

INNO29381

Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible.

Maszyna do wytłaczania i wykrawania

Baier Geba 46/A

Niemcy

nieznany

używany

na żądanie

INNO29219

A fully automatic hot stamping and punching machine Baier Maschinenfabrik is available. Max. material width: 250mm, max. punching width: 240mm, heating power: 2200W, stamping force: 100kN. On-site inspection is possible.

Boxmaker

Solarco BMC 17 DCP

Niemcy

2008

używany

na żądanie

INNO29089

A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Maszyna do druku kopert

Winkler + Dünnebier 341 GS

Niemcy

2000

używany

na żądanie

INNO28841

Format range: Envelopes min./max.: 114x176mm/254x324mm, Booklet min./max.: 114x127mm/270x360mm, Pockets: With center seams min/max: 114x178mm/330x406mm, With side seams min/max: 114x178mm/254x406mm. Output: Dextrin or peel and seal: 600/min, latex gumming: 400/min. Documentation available. On-site inspection is possible.

Maszyna do cięcia

Polar Mohr Polat 107 EL

Niemcy

nieznany

używany

na żądanie

INNO28733

Cutting width: 1070mm, cutting height: 165mm, minimum residual cut: 32mm. On-site inspection is possible.

Wytłaczarka

Wpm 400 B

Niemcy

2000

używany

na żądanie

INNO28698

Materials: paper/cardboard/solid board/corrugated board, min. paper weight: 80g/m², max. cardboard and solid board weight: 2000g/m², max. corrugated board thickness: 4mm, stack height at feeder/outfeed: 1700mm/1800mm. Punching force: 400t, min. sheet size: 350mm/400mm, max. sheet size: 820mm/1130mm, machine speed: 9000 sheets/h. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

Składarka

Mbo FW 56/4

Niemcy

nieznany

używany

na żądanie

INNO28627

An MBO folding machine is available. Buckle plates: 4, max. paper width: 560mm. On-site inspection is possible.

Maszyna do druku kopert

Winkler + Dünnebier Helios 135

Niemcy

1967

używany

na żądanie

INNO28521

A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible.

Maszyna workowa

Honsel & Co. 722

Niemcy

nieznany

używany

na żądanie

INNO28479

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible.

Maszyna workowa

Honsel & Co. 722

Niemcy

nieznany

używany

na żądanie

INNO28478

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible.

Maszyna do płaskich worków

Honsel & Co./pcm Krause P44

Niemcy

2003

używany

na żądanie

INNO28477

A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible.

Maszyna workowa

Seydel

Niemcy

1994

używany

na żądanie

INNO28476

A bag making machine (packaging machine for industrial bags) Seydel is available. Working width: 1020mm, wrapping closure: one-sided/both-sided. Including cardboard flange feeder and deposit table with counter and advance. On-site inspection is possible.

Maszyna do sztancowania kartonu

Wupa 6.3

Niemcy

nieznany

używany

na żądanie

INNO28464

Corrugation types: F/W/E/B/C, double corrugation types: FF/FE/FB/EB, gray board weight: 600g-1200g/m², board thickness range: 0.15mm-6mm, grammage capacity: 180g-1200g/m², min. sheet size: 590mm/700mm, max. sheet size: 1015mm/1410mm, blade size X/Y: 995mm/1390mm, sheet start to 1st blade: 15mm. Documentation available. On-site inspection is possible.

Laminator

Afs AVE-250E

Niemcy

2019

używany

na żądanie

INNO28440

An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible.

Bobiniarka i przewijarka rolek

Sml W2000

Niemcy

2016

używany

na żądanie

INNO28439

A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible.

Ploter tnący

Aristo Aristomat 2032 GL

Niemcy

2003

używany

na żądanie

INNO28181

An Aristo plotter equipped for solid and corrugated board with Multihead OT.T.M.P. II-2 is available. Working width: 2000mm, working length: 3200mm, static repeat accuracy: +/-0.08mm, max. speed: 2.3m/s, max. acceleration: 2G, max. material passage height: 55mm, vacuum pump power: 5.5kW. Machine dimensions X/Y/Z: approx. 2700mm/4250mm/1100mm. Documentation available. On-site inspection is possible.

Maszyna inline

Dy Machinery FPS-120Gold Inliner

Niemcy

2009

używany

na żądanie

INNO28176

A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025.

Maszyna do druku kopert

Winkler + Dünnebier 527 GS

Niemcy

1993

używany

na żądanie

INNO27866

Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible.

Laserowy system punktacji

Mlt L 400

Niemcy

nieznany

używany

na żądanie

INNO27794

Path width: 1600mm, processing position: 50mm-1500mm, processing heads: 10x longitudinal scribes, longitudinal scribe line width: 50µm-100µm, laser power per head: under 40W. Laser head L400: wavelength: 10.6µm, output power: 400W, power stability: +/-2%. Machine dimensions X/Y/Z: approx. 3000mm/4500mm/4000mm, weight: approx. 5000kg. Including cooling unit PC 080 and supply cabinet. Retrofitting with 4x cross scoring is possible. Documentation available. On-site inspection is possible.