▷ Used production machinery for packaging material from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Production machinery for packaging material

Bag machines 9 Corrugated cardboard manufacturing and processing 3 Cutting machinery 11 Envelope machines 11 Folder gluer 3 Folding machines 2 Labeling machines 2 Laminating installations 4 Other machinery 15 Perforating machines 1 Presses 1 Punching pans 2 Punchs 8 Winders 5

Innovac used-machines

Production machinery for packaging material [1 - 20 of 77]

Bag Making Machine

Stiegler B 1050

Germany

1997

used

on request

INNO31244

A bottom-seal bag/sack welding machine Stiegler is available. Film width: 1050mm, section length range: 90mm-650mm, max. operating cycle: 140/min, max. film web speed: 80m/min, max. roll diameter: 800mm, max. web speed: 60m/min, core diameter range: 76mm. Machine dimensions X/Y/Z: approx. 6000mm/1700mm/1600mm, weight: approx. 3400kg. Including 2 welding bars, punching device and Euro hole punching. The edge control of the machine is defective. Documentation available. An on-site inspection is possible.

Airpad Machine

Brüninghaus AP 502

Germany

2010

used

on request

INNO31221

Film width: 420mm, max. film roll diameter: 280mm, film length range: 500-1000mm, film core diameter: 76mm, film type: airpad, film thickness range: 0.042-0.08mm, capacity: 25-49 cycles/min, fuse protection: 16A, connected load: 2kVA, energy consumption: 1.1kWh, compressed air connection hose diameter NW10: 4-8bar, air consumption: max. 82Nl/min during cushion production, max. 3.5Nl per cycle, continuous sound pressure level: 70dB, length: 1600mm, width: 800mm, height: 1300mm, weight: approx. 266kg. An on-site inspection is possible.

Film Bag Direct-Printing Packaging Machine

Sbb bag printer speed DVA-231

Germany

unknown

used

on request

INNO31219

Tube film width: 60-215mm, film thickness: 0.06-0.12mm, max. tube film roll diameter: 300mm, film core diameter: 76mm, bag length: 60-600mm, output at bag length 100mm and film thickness 0.06mm: 15 pcs/min, print image dimensions: 300x213mm, print length: max. 300mm, optional print length: up to 600mm, table dimensions: 880x460/600mm, table height: 850mm, connected load: 2.3kW, fuse protection: 10A, supply pressure: 6bar, rel. humidity: 25%-85%, noise emission: 75dB(A), length: 1200mm, width: 1200mm, height: 1550mm, weight: 250kg, with documentation. An on-site inspection is possible.

Remaining Stock

Hang/müro 106MK-8/60x72-ST

Germany

1980

used

on request

INNO31173

Various small machines from a packaging factory are available. 1) Multi-spindle paper drilling machine Constanting Hang 106MK/8, year of manufacture: 1980, drilling spindles: 8, drilling range: 3mm-8mm, hole spacing range: 36mm-630mm. Documentation available. 2) Vibrating table Müro 70x72 ST, paper dimensions X/Y: 700mm/450mm, max. stack height: 100mm, weight: approx. 50kg. 3) Small extraction unit Kongshilde TRL 40, year of manufacture: 2023, machine dimensions X/Y/Z: approx. 900mm/1000mm/950mm. 4) Conveyor belt, year of manufacture: 2018, belt height: approx. 970mm, belt dimensions X/Y: approx. 2300mm/600mm, machine dimensions X/Y/Z: approx. 2400mm/950mm/1050mm. An on-site inspection is possible. Only a package sale is possible.

Envelope-making Machine

Winkler + Dünnebier Helios 249.41B

Germany

1991

used

on request

INNO31144

A W+D envelope manufacturing line is available. Blank length range: 265mm-653mm, blank width range: 214mm-726mm, max. production output: 450/min, paper weight range: 80g/m²-150g/m², max. paper roll diameter: 1500mm, max. paper roll width: 686mm, window reel width range: 30mm-490mm, window material section length range: 55mm-280mm. Documentation available. An on-site inspection is possible.

Envelope-making Machine

Winkler + Dünnebier 2741

Germany

1979

used

on request

INNO31143

An envelope manufacturing system W+D for special formats, photo pouches, mailings and multiple foldings without gumming is available. Paper weight range: 70g/m²-270g/m², min. bottom flap pre-creasing: 10mm, max. side flap pre-creasing: 50mm, max. paper width: 620mm, max. paper length range: 150mm-470mm, bottom flap folding range: 25mm-45mm, min. format with 38mm fold: 115mm/100mm, max. format with 20mm fold: 280mm/380mm, min. closing flap: 50mm. Documentation available. An on-site inspection is possible.

Cutting Machine

Schneider 2032

Germany

1992

used

on request

INNO31142

A hydraulic industrial system Schneider for paper and cardboard processing is available. Power: 28kW, oil filling: 400l, operating pressure: 100bar-240bar, max. table load: 300kg, max. product dimensions X/Y: 2000mm/3200mm, weight: approx. 7900kg. An on-site inspection is possible.

Bag Making Machine

Stiegler US-S 1000

Germany

1994

used

on request

INNO31126

A Stiegler side weld bag-making machine in need of repair is available. Working width: 1000mm, film material: PE/PP, feed range: 80mm-600mm, max. clearance: 900mm, film width range: 200mm-1380mm, film thickness range: 0.025mm-0.085mm, output: 160cycles/min, max. C-fold triangle: 1380mm. Including bottom gusset device, hot stamping units, thermal transfer units, ribbon unwinding unit, unwinding station and various accessories. The control system of the line must be renewed. Documentation available. An on-site inspection is possible.

Flat Bed Die Cutter

Img Klett Cobra A120-162

Germany

2004

used

on request

INNO31107

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

Rotary Die-Cutting Machine

Edelmann WEB 48 Five Rolle-Bogen

Germany

2002

used

on request

INNO31000

An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible.

Hot Stamping Press

Oropress 38-39-50-65 AUT. A PISTONE

Germany

1986

used

on request

INNO30967

A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible.

Excenter Slitter

Klett MF 2350 74

Germany

1980

used

on request

INNO30807

Working width: 2350mm, min. slitting knife spacing: 110mm, slot width: 5mm, slot depth range: 0mm-400mm, binding edge area: 45mm, max. material weight: 2000g/m². Documentation available. An on-site inspection is possible.

Laminating System

Windmöller & Hölscher Variocoater 6600

Germany

1996

used

on request

INNO30546

A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible.

Airpad Machine

Activatec activaAir BP 4000

Germany

unknown

used

on request

INNO30435

Several air cushion machines activaTec are available. Production speed: 15m/min, film thickness range: 13mm-40µm, roll length: 700m/1500m. Machine dimensions X/Y/Z: approx. 315mm/300mm/315mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture shows an example unit.

Paper Core Saw

Inova Pappkern

Germany

2019

used

on request

INNO30351

An Inova saw for cutting paper cores is available. Paper core length range: 50mm-2000mm, paper core inner diameter: 400mm-500mm, wall thickness range: 15mm-30mm, max. payload: 30kg. Machine dimensions X/Y/Z: approx. 3500mm/1000mm/1850mm, weight: approx. 1600kg, control: Siemens HMI. Dokumentation vorhanden. An on-site inspection is possible.

Cutting and Winding Machine

Olbricht

Germany

unknown

used

on request

INNO30295

A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January.

Air Cushioning Machine

Brüninghaus AP 502

Germany

2010

used

on request

INNO30252

An air cushion machine Brüninghaus (Fromm) is available. Film width: 420mm, max. film roll diameter: 280mm, film length range: 500mm-1000mm, film core diameter: 76mm, film type: AIRPAD, film thickness range: 0.042mm-0.08mm, capacity: 25-49 cycles/min. Machine dimensions X/Y/Z: approx. 2100mm/800mm/1300mm, weight: approx. 270kg. Documentation available. An on-site inspection is possible.

Central Winding Machine

Euromac CB 500S

Germany

2018

used

on request

INNO30187

A Euromac doctor rewinder for unwinding and rewinding web materials on rolls is available. Web width: 450mm, max. speed: 400m/min, materials: paper/aluminum/composite materials, material thickness range: 30µm-100µm, max. parent roll diameter: 520mm, max. roll weight: 100kg, max. rewind diameter: 520mm, max. core/adapter inner diameter: 76mm/120mm. Including Häwa water cooling, floor scanner, and side safety fence. Documentation available. An on-site inspection is possible.

Pouch Manufacturing Plant

Roll-o-matic Compact 860l

Germany

2012

used

on request

INNO30165

A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.

Flat Bed Die Cutter

Ueda Shiko Kikai Uniplaten U-1400

Germany

1986

used

on request

INNO29998

A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.