Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1 - 20 of 2532]

Szlifierka do zewnętrz wałków CNC

Roweig SA 6/3 S/B - CNC x 1500

Niemcy

2013

używany

na żądanie

INNO29492

Center height: 310mm, orbital diameter: 600mm, center width: 1500mm, sanding length: 14010mm, max. workpiece weight: 500kg, machine dimensions X/Y/Z: approx. 5500mm/2600mm/2400mm, weight: approx. 7500kg, control: Siemens Simatic S7 802D, operating hours: approx. 13771h. Including operating tools, grinding wheel holder and setting vice. The machine is fault-prone. Documentation available. On-site inspection is possible.

Maszyna polerska

Otec CF2x18

Niemcy

2012

używany

na żądanie

INNO29491

An OTEC centrifugal polishing machine is available. Container: 2, container volume: 18l, container inner diameter: 330mm, machine dimensions X/Y/Z: approx. 1500mm/1200mm/2000mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.

Mikser beczkowy

Müller FTM 300 MG1

Niemcy

2014

używany

na żądanie

INNO29490

Two identical mixers from Müller GmbH are available. Payload: 200kg, process: Tumbling/mixing, bung drum volume range: 100l-200l, mixing speed: 15rpm, drum diameter: 560mm, max. drum height: 885mm, mixing angle range: 0°-180°, machine dimensions X/Y/Z: approx. 1400mm/2000mm/1800mm. One of the machines was used sporadically, the other hardly ever. Documentation available. On-site inspection is possible.

Wykrawarka laserowa CNC

Trumpf TruMatic 3000

Niemcy

2010

używany

na żądanie

INNO29489

A Trumpf CNC punching and laser combination machine is available. Punching force: 165kN, laser source: Trumpf TruCoax 2000, laser power: 2000W, working range X/Y: 2500mm/1250mm, max. sheet thickness: 4mm. Machine dimensions X/Y/Z: approx. 6500mm/6000mm/2250mm, weight: approx. 10000kg, operating hours: 53940h, laser hours: 12420h. Documentation available. On-site inspection is possible.

Maszyna do sitodruku

Werner Kammann 4, 15, 22

Niemcy

1982

używany

na żądanie

INNO29488

Inks: 6, UV dryer: 4, disk diameter: 120mm, cycle time: 75 cycles/min, print length: 315mm, print speed: 4200 prints/h. On-site inspection is possible.

Rozdrabniacz

Cushion Pack CP 428 S2

Niemcy

2011

używany

na żądanie

INNO29487

A Cushion Pack cardboard shredder is available. Cutting width: 420mm, max. inlet height: 20mm, shredding capacity: approx. 6m³-9m³/h, working height: 890mm, feed speed: 14m/min, motor power: 3kW. Machine dimensions X/Y/Z: approx. 1100mm/750mm/800mm, weight: approx. 250kg. Including suction unit. Documentation available. On-site inspection is possible.

Współrzędnościowa maszyna pomiarowa CNC

Keyence VL 500

Niemcy

2023

używany

na żądanie

INNO29486

A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg Allrounder 270 C 400-70 Golden

Niemcy

2007

używany

na żądanie

INNO29485

Screw diameter: 22mm, stroke volume: 16cm³, injection weight: 17g/hp, injection pressure: 2000bar, injection speed: 290mm/s, clamping force: 400kN, opening stroke: 350mm, tie bar distance: 270mm/270mm, platen dimensions X/Y: 446mm/446mm, min. mold height: 200mm, max. platen distance: 550mm. Machine dimensions X/Y/Z: approx. 2600mm/1000mm/1800mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Prasa ekscentryczna

Ebu HK 80/410 FR

Niemcy

1990

używany

na żądanie

INNO29484

Press force: 800kN, motor power: 7.5kW, ram stroke: 30mm-240mm, stroke rate: 30-80 strokes/min, ram height adjustment: 80mm, throat depth: 410mm, installation height: 695mm, table dimensions X/Y: 1200mm/800mm, hole dimensions X/Y: 350mm/370mm, table height: 800mm, ram dimensions X/Y: 900mm/450mm, pivot hole dimensions X/Y: 50mm/90mm. Machine dimensions X/Y/Z: approx. 1700mm/2400mm/3600mm, weight: approx. 12100kg. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Gsn PF5 UM100

Niemcy

2013

używany

na żądanie

INNO29483

A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Engel Victory 2050H/500V/300 Combi

Niemcy

2008

używany

na żądanie

INNO29482

Clamping force: 3000kN, tie bar distance: 1090mm, min. mold height: 550mm, max. mold area: approx. 1400mm, opening stroke: approx. 500mm, screw diameter vertical/horizontal: 40mm/70mm, screw stroke: 130mm, injection weight: 900g, machine weight: approx. 24000kg, operating hours: approx. 65345h. Documentation available. On-site inspection is possible.

Przenośnik taśmowy

Rheta

Niemcy

nieznany

używany

na żądanie

INNO29481

A RHETA conveyor belt is available. Center distance: approx. 9300mm, belt width: 500mm. On-site inspection is possible.

Strugarka do długich elementów

Reichle & Knödler P 4000

Niemcy

1965

używany

na żądanie

INNO29480

Stroke speed cut/return: 80m/min, feed cross support/long support: 27mm/stroke, table dimensions X/Y: 4000mm/1250mm, max. table load (table center): 2000kg, tool holder: planing steels with rectangular cross-section, tool dimensions X/Y: 50mm/50mm, bed length: 9400mm, planing length: 4500mm, planing width: 1520mm, planing height without/with cross support: 1310mm/1250mm, connected load: 64kVA. Total system dimensions X/Y/Z: approx. 10000mm/3300mm/2500mm, weight: approx. 26000kg, foundation weight: 60000kg. The machine was electrically re-equipped in 1986. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Deckel Maho DMC 70 H duoBlock

Niemcy

2005

używany

na żądanie

INNO29479

Travel X/Y/Z: 750mm/800mm/800mm, table dimensions X/Y: 500mm/500mm, max. table load: 800kg, tool holder: SK40, speed: 18000rpm, tool positions: 120, machine weight: approx. 17000kg, control: Siemens Sinumerik 840D, operating hours: approx. 85532h, spindle hours: approx. 44907h. Including a filter system with a 900l coolant tank, a chip conveyor and a Renishaw measuring probe. The machine spindle was replaced by Deckel Maho in 2022. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 220 S/250-60

Niemcy

1997

używany

na żądanie

INNO29478

Clamping force: 250kN, approach force: 20kN, opening force: 65kN, max. opening stroke: 275mm, mold installation height: 200mm, platen distance: 475mm, column distance: 220mm, platen dimensions X/Y: 400mm/400mm, screw diameter: 22mm, stroke volume: 30cm³, molded part weight: 25g/hp, weight: approx. 1900kg, operating hours: approx. 42046h. Documentation available. On-site inspection is possible.

Piła tarczowa

Homag CH-03/32/22

Niemcy

1997

używany

na żądanie

INNO29477

A Homag horizontal panel saw is available. Saw blade outer diameter: 300mm, saw blade inner diameter: 75mm, speed: 4550rpm, scoring saw blade outer diameter: 125mm, scoring saw blade inner diameter: 45mm, speed: 5100rpm, cutting height: 50mm, cutting width: 1250mm/2200mm, workpiece length: 3200mm. Total system dimensions X/Y/Z: approx. 4700mm/5000mm/2000mm, machine weight: approx. 3500kg. Including saw blades and various spare parts. Documentation available. On-site inspection is possible.

Szlifierka CNC

Junker Jucrank 3000/50

Niemcy

2001

używany

na żądanie

INNO29476

A defective Junker CNC crankshaft grinding machine is available. Workpiece diameter range: 35mm-70mm, max. workpiece length: 500mm, grinding wheel diameter: 350mm, bore: 127mm, pad width: 30mm, peripheral speed: 140m/s. Machine dimensions X/Y/Z: approx. 7200mm/3900mm/2700mm, weight: approx. 8000kg, VRF system weight: approx. 5700kg. Including Knoll cooling lubricant system with filter and sludge dryer. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Chiron FZ 15 S

Niemcy

2005

używany

na żądanie

INNO29475

A machining center is available. Travel X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, speed: 10500rpm, tool positions: 20, tool holder: SK40, table load: 300kg, control: Siemens Sinumerik. The screen of the machine is defective. Documentation available. On-site inspection is possible.

Tokarka CNC

Traub TNS 65D

Niemcy

1991

używany

na żądanie

INNO29474

A CNC lathe is available. Turning diameter over bed: 450mm, turning length: 630mm, spindle bore: 65mm, speed: 4000rpm, rapid traverse: 15m/min, power: 57kW, travel X/Z: 175mm/630mm, tool positions: 12+8+4, machine dimensions X/Y/Z: approx. 4000mm/2200mm/2200mm, weight: approx. 6500kg, control: Traub System TX-8-D, operating hours: 19465h. Documentation available. On-site inspection is possible.

Tokarka CNC

Traub TNS 65D

Niemcy

1991

używany

na żądanie

INNO29473

A CNC lathe is available. Turning diameter over bed: 450mm, turning length: 630mm, spindle bore: 65mm, speed: 4000rpm, rapid traverse: 15m/min, power: 57kW, travel X/Z: 175mm/630mm, tool positions: 12+8+4, machine dimensions X/Y/Z: approx. 4000mm/2200mm/2200mm, weight: approx. 6500kg, control: Traub System TX-8-D. Documentation available. On-site inspection is possible.