Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1 - 20 of 3084]

Rozdrabniacz brył

Emde Automation KB 42/400

Niemcy

2020

używany

na żądanie

INNO32412

Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power.

Frezarka

Tos Obrabeci Stroje FNK 2

Niemcy

1998

używany

na żądanie

INNO32411

Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible.

Prasa kolanowa z jednym słupkiem

May Pressenbau MKN1-100/6

Niemcy

nieznany

używany

na żądanie

INNO32410

Ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible.

Piła linowa do cięcia konturowego

Baumunk KSSF 2000 UNIKONTUR

Niemcy

2000

używany

na żądanie

INNO32409

A Baumunk contour wire saw in need of repair is offered. Drive power: 5.5kW, control: Bosch OSA. The machine has been idle for about one year. Contour sawing was still working well when last used. The mounting for the grinding rollers is defective. Inspection by appointment possible.

Prasa krawędziowa CNC

Steiner AK 25/350

Niemcy

1987

używany

na żądanie

INNO32408

Control: Cybelec DNC 600S. Inspection by appointment possible.

Tokarka centralna

Knuth Compass 200/1500

Niemcy

2001

używany

na żądanie

INNO32407

Total power: 6kW, voltage: 400V, frequency: 50Hz/3-phase. Documentation available. Inspection by appointment possible.

Wentylator promieniowy wysokotemperaturowy

Evg Lufttechnik RVS5-RU-71-R-RD90-V

Niemcy

2022

używany

na żądanie

INNO32406

A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available.

Odciąg trocin

Donaldson Torit DCE TDS16

Niemcy

2015

używany

na żądanie

INNO32405

A Donaldson dust collector for manual grinding workstations is offered. Airflow: 12000m³/h, negative pressure: 3200Pa, number of filter elements: 16, filter area: 336m², motor power: 30kW, speed: 2945rpm, operating point: 12000m³/h at 4450Pa and 23.8kW. Equipped with fan EUM 600/400-2, year of manufacture 2015, and electric motor type 200 L/2, 2-pole, 30kW, 50Hz. Airflow: 7500/18900m³/h, pressure: 6200/3900Pa. Inspection by appointment possible.

Maszyna do skręcania przędzy pierścieniowej

Galan TW-250/2

Niemcy

1998

używany

na żądanie

INNO32404

Ring diameter: 200mm, bobbin length: 550mm, connected load: 13kW, mains connection: 380V, three-phase connection: N + PE, an on-site inspection is possible.

Pionowe centrum obróbcze

Bridgeport VMC 1000-30

Niemcy

nieznany

używany

na żądanie

INNO32403

A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible.

Maszyna do skręcania przędzy pierścieniowej

Galan MULTI 1XS

Niemcy

2003

używany

na żądanie

INNO32402

Number of spindles: 5, ring diameter: 200mm, bobbin length: 550mm, compressed air connection: 6-8bar, compressed air consumption: 0.5l/s, voltage: 380V, frequency: 50Hz, connected load: 6kW, CE marking present, an on-site inspection is possible.

Maszyna do formowania wtryskowego

Demag Ergotech Krauss Maffei extra 80-430

Niemcy

nieznany

używany

na żądanie

INNO32401

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Maszyna do formowania wtryskowego

Sumitomo Demag IntElect 100/470-340

Niemcy

2014

używany

na żądanie

INNO32400

Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible.

Maszyny do szycia

Dürkopp/adler 220-76 / 767-FA-373 / K767

Niemcy

1999

używany

na żądanie

INNO32399

A package of five Dürkopp/Adler industrial sewing machines is offered. 1) Dürkopp industrial sewing machine. 2) Adler 220-76 long-arm industrial sewing machine. 3) Dürkopp industrial sewing machine. 4) Dürkopp Adler 767-FA-373-RAP industrial sewing machine, type: 0767 990015, year of manufacture: 1999. 5) Dürkopp Adler K767 industrial sewing machine. Inspection possible by prior arrangement.

Linia do strugania i profilowania

Weinig / Alfred Harbs Unimat 23 E / Uniplan / UC 10 / K6V

Niemcy

1996

używany

na żądanie

INNO32398

Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible.

Hydrauliczny obrotnik uchylny

Kinshofer KM04S68-30

Niemcy

2021

używany

na żądanie

INNO32397

Load capacity: 4.5t, shaft diameter: 68mm, max. hydraulic pressure: 370bar, rotator flow rate: approx. 25-40l/min, torque: 850Nm, bending moment: 3000Nm. An on-site inspection is possible.

Pionowe centrum obróbcze

Bridgeport XR 1000

Niemcy

2007

używany

na żądanie

INNO32396

A vertical CNC machining center in need of repair is offered for sale. Main motor: 15kW (S1), max. current: 36A, phases: 3, control: Heidenhain. Weight: approx. 7000kg. The main spindle has bearing damage, and the control requires overhaul. An inspection is possible by prior arrangement.

Pionowa maszyna do formowania wtryskowego

Cronoplast BABYPLAST 6/10VP

Niemcy

2009

używany

na żądanie

INNO32395

Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible.

Urządzenie plazmowe niskociśnieniowe

Advanced Plasma Systems D-SERIES

Niemcy

nieznany

używany

na żądanie

INNO32394

Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible.

Pozioma maszyna do plecenia

Steeger K80/16-72

Niemcy

1990

używany

na żądanie

INNO32393

Number of carriers: 16, an on-site inspection is possible.