Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1 - 20 of 2242]

Zawiasowy przenośnik taśmowy

Mayfran MT 10

Niemcy

nieznany

używany

na żądanie

INNO26854

Chain pitch: 31.75mm, chain roller diameter/width: 19mm/8mm, belt thickness: 2mm, belt width min./max.: 100mm/500mm, carrier height: 20mm, guide track thickness: 2.5mm, belt pulling force: 6400N, breaking load: 60000N, speed grades: 1/1.5/3m/min, max. central length: 6000mm. Documentation available.

Prasa do gięcia krawędzi

Hämmerle AP 200-3600

Niemcy

1991

używany

na żądanie

INNO26853

Pressing force: 2000kN, working width: 3600mm, max. stroke: 400mm, throat depth: 500mm, stops: 6, control: DNC 7000, weight: approx. 21000kg. Including various lower tools and dies with bolts as well as a holding rail. For example, prisms 7-90 and punches (straight and cranked) are included. Documentation is available. On-site inspection is possible.

Sprężarka śrubowa

Atlas Copco GX5FF EP

Niemcy

2019

używany

na żądanie

INNO26851

There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available.

Bobiniarka rolowa

Goebel Practica 4

Niemcy

1979

używany

na żądanie

INNO26850

Max. Unwinding diameter: 1000mm, max. unwinding width: 1350mm, max. rewinding diameter: 400mm. Including various rewinding shafts (8mm-76mm), core hopper, roll separator, beater unit, film bander, shrink tunnel, various conveyor belts.

Przenośnik rolkowy

Niemcy

2016

używany

na żądanie

INNO26847

There are 2 pallet roller tracks available with separation and brake rollers at the end of the track. Format: pallets 1200mm/800mm, length: 4000mm, width: 1000mm.

Szlifierki do wałków

Schaudt PF 43 U-M 1000

Niemcy

1990

używany

na żądanie

INNO26846

Grinding length: 1000mm, center height: 180mm, max. external grinding diameter: 360mm, max. internal grinding diameter: 260mm, max. internal grinding depth: 300mm, max. workpiece weight: 200kg. B-axis on workpiece holder headstock: 0-180°, B-axis positioning: 0.001°, headstock stroke: 320mm, workpiece holder slide stroke(Z): 1300mm, grinding wheel: 500mm/60mm/100mm/203mm, speed: 20-45m/sec. Internal grinding spindle diameter: 120mm, quill stroke: 60mm, Speed: 1200rpm. Dimensions X/Y/Z: 4340mm/2250mm/2200mm, weight: approx. 7100kg, control: Siemens Sinumerik. Documentation available. On-site inspection is possible.

Piec retortowy

Xerion XRetort

Niemcy

2015

używany

na żądanie

INNO26848

There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible.

System odpylania

Ammann AFA-3095

Niemcy

2016

używany

na żądanie

INNO26841

A dedusting system for asphalt mixing plants is available. Extraction volume: 90,000Nm³/h, effective exhaust gas volume: 130,000m³/h, filter area: 1105m².

Maszyna do formowania wtryskowego

Arburg 270M 500-210

Niemcy

1994

używany

na żądanie

INNO26844

Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.

Maszyna do formowania wtryskowego

Arburg Allrounder 270M 350-90

Niemcy

1994

używany

na żądanie

INNO26843

Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.

Roboty

Kuka/abb KR/IRB

Niemcy

2014

używany

na żądanie

INNO26842

There are 7 ready-to-load robots from the manufacturers Kuka and ABB available. 1) ABB IRB 1600-6/1,45: Year of construction: 2014, operating hours: approx. 24000h, running noises on axis no. 2. 2) Kuka KR 140 L100-2 comp: Year of construction: 2008, operating hours: approx. 29000h. 3) Kuka KR 30-2: Year of manufacture: 2004, operating hours: approx. 53000h. 4) ABB IRB 1600-6/1,45: Year of construction: 2012, operating hours: approx. 25500h. 5) Kuka KR 30-2: Year of construction: 2011, operating hours: approx. 2000h. 6) ABB type: unknown: Year of construction: unknown, operating hours: approx. 1500h. 7) Kuka KR 140: Year of construction: 2006, operating hours: approx. 44000h, without control panel. All robots (except 7) including control unit and operating panel.

Bonder do grubego drutu

Hesse Bondjet 939

Niemcy

2012

używany

na żądanie

INNO26845

There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg.

Maszyna do wciskania

Haeger 824Plus-He

Niemcy

2014

używany

na żądanie

INNO26839

Pressing force: 71kN, projection: 610mm, max. stroke length: 220mm, output: 1400E/h, weight: approx. 1300kg.

Eliog KU 300

Niemcy

nieznany

używany

na żądanie

INNO26840

Max. temperature: 300°C, internal dimensions X/Y/Z: 1000mm/1000mm/1500mm, external dimensions X/Y/Z: 1765mm/1425mm/2300mm, weight: 850kg.

Maszyna do formowania wtryskowego

Arburg Allrounder 570C 2000-675

Niemcy

1999

używany

na żądanie

INNO26838

Screw diameter: 55mm, max. injection weight: 434g, max. injection pressure: 1720bar, clamping force: 2200kN, min. installation height: 250mm. Dimension between the platens: 900mm, max. opening stroke: 750mm, centering bore nozzle side/ejector side: 125mm/125mm. On-site inspection is possible.

Frezarka

Reiden BF 2 PR

Niemcy

1990

używany

na żądanie

INNO26837

Travel X/Y/Z: 1200mm/700mm/750mm, control: Heidenhain, table dimensions X/Y: 1200mm/630mm, speed: 2900rpm, weight: approx. 6500kg. Electronic problems, bearing locking in the gearbox.

System czyszczący

Rosink

Niemcy

nieznany

używany

na żądanie

INNO26836

There are several machines, including 2x cleaning systems, hot tank, extraction system, granifrigor and fan, unknown crankshafts (presumably BR8000). All machines dismantled and partly ready for loading, crankshafts packed. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg Allrounder 420C 1300-350

Niemcy

1998

używany

na żądanie

INNO26835

Clamping force: 1300kN, approach force: 50kN, opening force: 35kN/increased 350kN, opening stroke: 500mm, mold installation height: 250mm. Distance between platens: 750mm, clear column distance: 420mm x 420mm, mold platens: 605mm x 605mm. Movable mold half weight: 650kg, ejector force: 40kN, ejector stroke: 175mm. Screw diameter: 35mm/40mm/45mm, effective screw length: 23/20/18 L/D, max. screw stroke: 145mm, stroke volume: 139cm³/182cm³/230cm³. Shot weight (hp): 127/166/210g, injection pressure: 2500bar/2000bar/1650bar, injection flow: 128/168/212cm³/s, back pressure: 350bar/160bar, screw circumferential speed: 47/53/60m/min. Oil filling: 235l, dimensions X/Y/Z: approx. 4350mm/1600mm/1800mm, weight: approx. 4900kg. Including conveyor belt, Geiger handling, carousel, temperature control units. Operating hours pump/automatic operation: approx. 89000h/83000h. Documentation available. On-site inspection is possible.

Agregat hydrauliczny

Schnupp R73

Niemcy

1998

używany

na żądanie

INNO26833

A Schnupp hydraulic unit with 2 Rexroth R73 pumps is available. Documentation available. On-site inspection is possible.

Nitownica

Böllhoff C-Zangen

Niemcy

1998

używany

na żądanie

INNO26832

There are 3x punch rivet feeders and 2x C-pliers Böllhoff available. Self-pierce rivet feeder: 2x ABF, 1x LG, years of construction: 1998-2003, rivets: 3x4mm and 3x5mm. C-tongs: Year of manufacture: 1998, max. rivet setting pressure: 250bar, max. rivet setting force: 50kN. Documentation available. On-site inspection is possible.