▷ Używana energetyka z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Energetyka

Awaryjne agregaty prądotwórcze 2 Elektrociepłownie 6 Generatory 2 Grzałki i dmuchawy 6 Inżynieria gazowa 3 Klimatyzacja 1 Kocioł parowy 23 Komponenty i akcesoria 3 Rozdzielnice i komponenty 3 Silniki i turbiny 24 Technologia maszyn chłodniczych 35 Technologia sprężonego powietrza, sprężarki 34 Transformatory 7 Turbiny parowe 1 Wymiennik ciepła 3

Innovac maszyny-uzywane

Energetyka [61 - 80 of 153]

Kompaktowy motoreduktor

Lenze g500-B600

Niemcy

nieznany

używany

na żądanie

INNO30095

Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.

Silnik trójfazowy

Hoyer HMC3 200L 1-2

Niemcy

2016

używany

na żądanie

INNO30057

A Hoyer three-phase asynchronous motor is available. Protection class: IP55, insulation class: F/B, design: IM B3L, efficiency class: IE3, power: 30kW/36kW, power factor: 0.90, operating mode: S1, weight: approx. 250kg. Including Lenze i550 frequency converter. On-site viewing is possible.

Szybki generator pary

Jumag DG 360

Niemcy

2011

używany

na żądanie

INNO29948

A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible.

Skojarzona elektrociepłownia

Kw Energie smartblock 50

Niemcy

2016

używany

na żądanie

INNO29921

Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message engine too hot. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation.

Palniki gazowe

Elco VG 5.950 M/TC

Niemcy

2024

używany

na żądanie

INNO29871

A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible.

Nagrzewnica powietrza

Kroll LH 630/ LH 530/ LH 430/ LH 420/ LH 330

Niemcy

nieznany

używany

na żądanie

INNO29828

A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible.

Silnik trójfazowy

Menzel MBR 500 M

Niemcy

nieznany

używany

na żądanie

INNO29688

A high-voltage motor MENZEL (formerly ASEA) is available. Voltage: 5000V, current: 68.6A, power: 500kW, power factor: 0.77, speed: 591rpm, thermal class: F, protection class: IP54, weight: approx. 4700kg. Documentation available. An on-site inspection is possible.

Silnik

Loher DSW-500LB-10A

Niemcy

2000

używany

na żądanie

INNO29687

An explosion-proof high-voltage motor Loher is available. Mounting type: IM B3, voltage: 5000V, current: 61A, power: 400kW, power factor: 0.79, speed: 597rpm, thermal class: F, protection class: IP55, explosion protection type: EEx d e II C T4, weight: approx. 5670kg. Includes built-in resistance thermometers. Documentation available. An on-site inspection is possible.

Awaryjny generator mocy

Elin/sgp S2506/S12

Niemcy

nieznany

używany

na żądanie

INNO29624

An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible.

Silnik

Weg 37kW 2P 200M/L WFX2

Niemcy

2021

używany

na żądanie

INNO29391

An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible.

Maszyna chłodnicza

Engie NX-W 0302

Niemcy

2017

używany

na żądanie

INNO29323

Refrigerant: R410a, refrigerant capacity: 10kg, oil type: RL32 3-MAF, oil capacity: 6.8l, max. low/high pressure: 29.5bar/45bar, cooling capacity: 76.9kW, weight: approx. 520kg. Documentation available. On-site inspection is possible.

Przekładnia

Thyssen/polysius/wgw KS/027,5/N 45PS

Niemcy

1990

używany

na żądanie

INNO29235

Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.

Palnik

Weishaupt/seibold WC 500

Niemcy

2022

używany

na żądanie

INNO29234

Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.

Urządzenie do chłodzenia wody

Hyfra VWK 50/1-S

Niemcy

2005

używany

na żądanie

INNO29119

A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.

Silnik serwo

Siemens Simotics M-1 PH8

Niemcy

nieznany

używany

na żądanie

INNO29077

Axle height: 80mm, power: 5.4kW, torque: 22.4Nm, speed: 2300rpm, moment of inertia: 98.3kg/cm², weight: approx. 50kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

Silnik serwo

Siemens Simotics M-1 PH8

Niemcy

nieznany

używany

na żądanie

INNO29072

An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

Sprężarka śrubowa

Blitz Monsun ECO 22 D FU

Niemcy

2013

używany

na żądanie

INNO29010

Speed: 3000/min, volume flow: 3.7m³/min, overpressure: 8bar, operating pressure: 4-13.5bar, oil capacity: 10l, connected load: 22kVA, length: 1500mm, width: 850mm, height: 1200mm, weight: 672kg. Including test certificates for the pressure vessels, speed-controlled with heat exchanger for heat recovery.

Jednostka chłodnicza

Rehsler/hercules Eurokühler Aries AS 219

Niemcy

2008

używany

na żądanie

INNO28788

A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible.

Wieża chłodnicza

Evapco AT-17-4J9

Niemcy

2019

używany

na żądanie

INNO28724

An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible.

Silnik

Sew-eurodrive K157 DRS225S4

Niemcy

nieznany

używany

na żądanie

INNO28485

Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible.