▷ Używana energetyka z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Energetyka

Awaryjne agregaty prądotwórcze 2 Elektrociepłownie 5 Generatory 1 Grzałki i dmuchawy 8 Inżynieria gazowa 3 Klimatyzacja 2 Kocioł parowy 16 Komponenty i akcesoria 4 Rozdzielnice i komponenty 1 Silniki i turbiny 18 Technologia maszyn chłodniczych 31 Technologia sprężonego powietrza, sprężarki 26 Transformatory 8 Wymiennik ciepła 5

Innovac maszyny-uzywane

Energetyka [41 - 60 of 130]

Agregat grzewczy

Kleindienst 3-294/3-174/3-1194

Niemcy

1994

używany

na żądanie

INNO29607

Three heating units Kleindienst are available. 1) Kleindienst 3-294, year of manufacture: 1994, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar, connected load: 4.9kW. 2) Kleindienst 3-174, year of manufacture: 1992, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar. 3) Kleindienst 3-1194, year of manufacture: 1994, connected load: 0.1kW. An on-site inspection is possible.

Płytowy wymiennik ciepła

Schmidt Sigma 37H37

Niemcy

1981

używany

na żądanie

INNO29538

A 2-stage plate heat exchanger W. Schmidt KG is available. Throughput capacity: 12000l/h, product temperature range: 5°C-93°C, max. operating pressure: 6bar, product: wort, machine dimensions X/Y/Z: approx. 1750mm/1750mm/600mm, weight: approx. 1000kg. Including 126 removed plates. On-site inspection is possible.

Palnik dwupaliwowy

Weishaupt RGL 70/1-A

Niemcy

1990

używany

na żądanie

INNO29433

A Weishaupt dual-fuel burner is available. Fuel: gas/fuel oil, gas type: N, category: I, set pressure min./max.: 30bar/180bar, heat output: 850kW-8550kW, oil throughput: 150kg-720kg/h, fuel oil: EL, engine output: 14kW, machine dimensions X/Y/Z: approx. 2100mm/1400mm/900mm. On-site inspection is possible.

Silnik

Weg 37kW 2P 200M/L WFX2

Niemcy

2021

używany

na żądanie

INNO29391

An unused explosion-proof three-phase motor WEG is available. Power: 37kW, voltage: 380V-415V/660V/460V, frequency: 50Hz, number of poles: 2, size: 200M/L, degree of protection: IP56, explosion protection: Ex eb, zone: 1, group: IIB, temperature class: T4 (135°C), cooling type: TEFC (surface-cooled with closed fan), insulation class: E, temperature class: G, operating mode: S1. Documentation available. On-site inspection is possible.

Maszyna chłodnicza

Engie NX-W 0302

Niemcy

2017

używany

na żądanie

INNO29323

Refrigerant: R410a, refrigerant capacity: 10kg, oil type: RL32 3-MAF, oil capacity: 6.8l, max. low/high pressure: 29.5bar/45bar, cooling capacity: 76.9kW, weight: approx. 520kg. Documentation available. On-site inspection is possible.

Przekładnia

Thyssen/polysius/wgw KS/027,5/N 45PS

Niemcy

1990

używany

na żądanie

INNO29235

Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.

Palnik

Weishaupt/seibold WC 500

Niemcy

2022

używany

na żądanie

INNO29234

Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.

Urządzenie do chłodzenia wody

Hyfra VWK 50/1-S

Niemcy

2005

używany

na żądanie

INNO29119

A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.

Silnik serwo

Siemens Simotics M-1 PH8

Niemcy

nieznany

używany

na żądanie

INNO29077

Axle height: 80mm, power: 5.4kW, torque: 22.4Nm, speed: 2300rpm, moment of inertia: 98.3kg/cm², weight: approx. 50kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

Silnik serwo

Siemens Simotics M-1 PH8

Niemcy

nieznany

używany

na żądanie

INNO29072

An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

Sprężarka śrubowa

Blitz Monsun ECO 22 D FU

Niemcy

2013

używany

na żądanie

INNO29010

Speed: 3000/min, volume flow: 3.7m³/min, overpressure: 8bar, operating pressure: 4-13.5bar, oil capacity: 10l, connected load: 22kVA, length: 1500mm, width: 850mm, height: 1200mm, weight: 672kg. Including test certificates for the pressure vessels, speed-controlled with heat exchanger for heat recovery.

Jednostka chłodnicza

Rehsler/hercules Eurokühler Aries AS 219

Niemcy

2008

używany

na żądanie

INNO28788

A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible.

Wieża chłodnicza

Evapco AT-17-4J9

Niemcy

2019

używany

na żądanie

INNO28724

An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible.

Silnik

Sew-eurodrive K157 DRS225S4

Niemcy

nieznany

używany

na żądanie

INNO28485

Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible.

Skraplacz

Bitzer KE-151

Niemcy

2001

używany

na żądanie

INNO28377

A semi-hermetic condenser unit including compressor and two ceiling evaporators is available. 1) Condenser Bitzer KE-151, year of construction: 2001, leak test: 2023, refrigerant: R134A, cooling capacity: 16kW, suction diameter: 54mm, pressure diameter: 28mm, liquid receiver: F302H, volume: 30l, max. operating temperature: 120°C, max. operating pressure: 26bar. 2) Two ceiling evaporators Günther DHN051C/27, max. operating overpressure: 28bar, max. operating temperature: 100°C, volume: 29l, rated output: 18.9kW, area: 102m², air volume flow: 1124m³/h, throw distance: 2x14m, extraction capacity: 7.2kW. Fan type: VT0139, fan diameter: 500mm, speed: 1380rpm. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/450mm. Documentation available. On-site inspection is possible. Individual sale possible.

System chłodzenia

Renova ICE-SM04-F0052Z4

Niemcy

2019

używany

na żądanie

INNO28189

Two identical Renova cooling units with Frascold compressors are available. Connected load: 19.6kW, cooling capacity: 38.6kW, temperature range: 0°C to +45°C, refrigerant: R449A, machine dimensions X/Y/Z: approx. 1500mm/2300mm/1500mm, weight: approx. 520kg. Documentation available. On-site inspection is possible.

Stojak dc

Phoenix Contact Charx Power 30kW

Niemcy

nieznany

używany

na żądanie

INNO28113

A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible.

Kocioł parowy

Bosch U-ND 2000

Niemcy

2015

używany

na żądanie

INNO28101

A Bosch low-pressure steam boiler is available. Total volume: 2480l, max. permissible pressure: 0.5bar, test pressure: 2bar, max. permissible temperature: 110°C, steam output: 1400kg/h, insulation thickness: 100mm. Machine dimensions X/Y/Z: approx. 2850mm/3800mm/3350mm, weight: approx. 3350kg. Documentation available. On-site inspection is possible.

Transformator

Abb TNOSCTN-400/21PNSm

Niemcy

2015

używany

na żądanie

INNO28079

Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible.

System chłodzenia chłodzony wodą

Carrier 30RW/30RWA-210

Niemcy

2004

używany

na żądanie

INNO28028

Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects.