▷ Używana energetyka z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Energetyka

Awaryjne agregaty prądotwórcze 4 Elektrociepłownie 5 Generatory 3 Grzałki i dmuchawy 5 Inżynieria gazowa 3 Kocioł parowy 13 Komponenty i akcesoria 4 Rozdzielnice i komponenty 2 Silniki i turbiny 11 Technologia maszyn chłodniczych 33 Technologia sprężonego powietrza, sprężarki 29 Transformatory 11 Wymiennik ciepła 3

Innovac maszyny-uzywane

Energetyka [21 - 40 of 126]

Silnik

Siemens 1FK

Niemcy

2016

używany

na żądanie

INNO28665

A total of 6 motors and a vacuum pump are available. 1) Servomotor Siemens 1FK 7043-4CH71. 2) Servomotor Siemens 1FK 7064-4CF71. 3-5) 3x servomotor Siemens 1FK 7042-2AF71. 6) Servomotor Siemens 1FK 7060-2AF71. 7) Vacuum pump Gardner Denver G-BH1 2BH1490-7AH16. On-site inspection is possible.

3-Fazowy transformator sieciowy

Retrasib DOTR 63000/115

Niemcy

2024

używany

na żądanie

INNO28486

Two identical and unused medium-voltage transformers for substations are available. Rated power: 63MVA, high voltage: 115kV, switching group: YNyn0 (d), cooling type: ONAN/ONAF, insulating fluid: Shell Diala S4 ZY-I, PCB content: below 1ppm. Machine dimensions X/Y/Z: approx. 7200mm/3600mm/4000mm, total weight: approx. 86000kg. The machines were never connected. Documentation available. On-site inspection is possible. Individual sale possible.

Silnik

Sew-eurodrive K157 DRS225S4

Niemcy

nieznany

używany

na żądanie

INNO28485

Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible.

Kocioł grzewczy

Viessmann SX1

Niemcy

nieznany

używany

na żądanie

INNO28473

Heat output: 225kW, water volume: 399l, operating overpressure: 4bar, flow temperature: 120°C, heating medium: natural gas. On-site inspection is possible.

Skraplacz

Bitzer KE-151

Niemcy

2001

używany

na żądanie

INNO28377

A semi-hermetic condenser unit including compressor and two ceiling evaporators is available. 1) Condenser Bitzer KE-151, year of construction: 2001, leak test: 2023, refrigerant: R134A, cooling capacity: 16kW, suction diameter: 54mm, pressure diameter: 28mm, liquid receiver: F302H, volume: 30l, max. operating temperature: 120°C, max. operating pressure: 26bar. 2) Two ceiling evaporators Günther DHN051C/27, max. operating overpressure: 28bar, max. operating temperature: 100°C, volume: 29l, rated output: 18.9kW, area: 102m², air volume flow: 1124m³/h, throw distance: 2x14m, extraction capacity: 7.2kW. Fan type: VT0139, fan diameter: 500mm, speed: 1380rpm. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/450mm. Documentation available. On-site inspection is possible. Individual sale possible.

Silnik elektryczny

Abb M3KP 225SMA

Niemcy

nieznany

używany

na żądanie

INNO28282

Three identical ABB electric motors are available. Voltage supply: 380V-690V, motor type: three-phase motor, switching frequency: 2kHz, max. overload time: 10s, cooling time: 10min. PTC sensor included. Documentation available. On-site inspection is possible.

System chłodzenia

Renova ICE-SM04-F0052Z4

Niemcy

2019

używany

na żądanie

INNO28189

Two identical Renova cooling units with Frascold compressors are available. Connected load: 19.6kW, cooling capacity: 38.6kW, temperature range: 0°C to +45°C, refrigerant: R449A, machine dimensions X/Y/Z: approx. 1500mm/2300mm/1500mm, weight: approx. 520kg. Documentation available. On-site inspection is possible.

Transformator

Elin TDQ-632A01S5H-19

Niemcy

2001

używany

na żądanie

INNO28174

Rated power: 630kVA, type: Lithium, power St1/St2/St3: 10400V/10000V/9600V, cooling type: ONAN, rated current: 36.35A, short circuit: 4.24%, max. short circuit duration: 2s, insulating fluid: Technol 2002, max. oil temperature: 95°C, max. oil weight: 335kg, machine weight: 1865kg. Documentation available. On-site inspection is possible.

Transformator

Bub S5841B

Niemcy

1984

używany

na żądanie

INNO28173

Rated power: 630kVA, Type: Lithium, Operating mode: Continuous operation, Power St1/St2/St3: 10400V/10000V/9600V, Cooling type: ONAN, Rated current: 36.4A, Short circuit: 4.2%, Max. short circuit duration: 2s, Machine weight: 1680kg, Oil weight: 340kg. Documentation available. On-site inspection is possible.

Stojak dc

Phoenix Contact Charx Power 30kW

Niemcy

nieznany

używany

na żądanie

INNO28113

A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible.

Kocioł parowy

Bosch U-ND 2000

Niemcy

2015

używany

na żądanie

INNO28101

A Bosch low-pressure steam boiler is available. Total volume: 2480l, max. permissible pressure: 0.5bar, test pressure: 2bar, max. permissible temperature: 110°C, steam output: 1400kg/h, insulation thickness: 100mm. Machine dimensions X/Y/Z: approx. 2850mm/3800mm/3350mm, weight: approx. 3350kg. Documentation available. On-site inspection is possible.

Transformator

Abb TNOSCTN-400/21PNSm

Niemcy

2015

używany

na żądanie

INNO28079

Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible.

Stacja przeładunkowa

Gräper GA 3,10 x 2,70

Niemcy

2003

używany

na żądanie

INNO28054

Two transfer stations used in the wind turbine industry are available. 1) Gräper GA 3.10 x 2.70, year of construction: 2003, weight: approx. 18 tons. 2) Transfer station. The stations are located at different sites. On-site inspection is possible.

System chłodzenia chłodzony wodą

Carrier 30RW/30RWA-210

Niemcy

2004

używany

na żądanie

INNO28028

Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects.

Suszarka chłodnicza i osuszacz adsorpcyjny

Kaeser TD 76

Niemcy

2019

używany

na żądanie

INNO27768

Three identical Kaeser refrigeration dryers are available. Volume flow: 8.25m³/min, operating pressure: 16bar, air inlet: 3°C-55°C, ambient temperature: 3°C-45°C, coolant: R-513A, coolant volume: 1.5kg, machine dimensions X/Y/Z: approx. 800mm/1200mm/1200mm, weight: approx. 250kg. The copper parts of the machines have been attacked (spare parts carrier or in need of repair). Documentation available.

Wieża chłodnicza

Karlsruhe (gohl-ktk) K 18-28-3

Niemcy

2002

używany

na żądanie

INNO27759

Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Generator czystej pary

Stilmas PSG 1500 DTS

Niemcy

2002

używany

na żądanie

INNO27721

Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible.

Generator trójfazowy z silnikiem Diesla

Volvo/stamford/steyr TAD1631GE/HCI544F1/17S230

Niemcy

2024

używany

na żądanie

INNO27715

A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible.

System parowy

Reining

Niemcy

2000

używany

na żądanie

INNO27710

A Reining waste gas heat recovery system is available. It receives the exhaust gases from the plant and currently generates approx. 25 t/h of steam from the heat of a hot rolling mill. The chimney and the heat exchangers were manufactured by Babcock-BSH around 1983. An on-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026.

Generator czystej pary

Finn Aqua 500 H1

Niemcy

1986

używany

na żądanie

INNO27674

Output at 45 PSIG: 440kg/h, max. pressure: 8bar, max. temperature: 121°C, material: stainless steel, steam: sterile, machine dimensions X/Y/Z: approx. 1200mm/800mm/2850mm. On-site inspection is possible.