Optyczny system pomiarowy

Keyence LS-9000

Niemcy

nieznany

używany

na żądanie

INNO28859

Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible.

więcej

Urządzenie do pomiaru okrągłości

Mitutoyo RA-426/436

Niemcy

2001

używany

na żądanie

INNO28642

A Mitutoyo roundness analysis system without monitor is available. Rotation accuracy: 0.02 + 0.0006H, rotation speed: 2/4/6/8/10 rpm, max. workpiece weight: 30kg, max. workpiece diameter: 500mm, machine weight: approx. 200kg, control: Roundpak-400, version: 3.002. Documentation available. On-site inspection is possible.

więcej

Automatyczny system kontroli rentgenowskiej

Anritsu XR 75 (KXS7522AVCLE)

Niemcy

2016

używany

na żądanie

INNO28620

An almost new Anritsu X-ray inspection system is available. X-ray power: 100W, max. detection width: 240mm, max. detection height: 120mm, detection speed from 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed from 5kg to 10kg: 10m-40m/min, housing material: stainless steel, machine weight: approx. 255kg, operating hours: less than 50h. The machine shows no wear on the conveyor belt or the radiation protection curtains. Documentation available. On-site inspection is possible.

więcej

Twardościomierz

Zwick 3202

Niemcy

1969

używany

na żądanie

INNO27522

Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.

więcej

Szafa klimatyczna

Memmert UL 800Ü

Niemcy

nieznany

używany

na żądanie

INNO28332

A Memmert universal heating oven for laboratory and test procedures is available. Nominal temperature: 180°C, internal dimensions X/Y/Z: 1040mm/1200mm/600mm, internal volume: 750l, output: 6.2kW, external dimensions X/Y/Z: approx. 1200mm/1650mm/750mm, weight: approx. 200kg. On-site inspection is possible.

więcej

Wyrównywarka kół

Beissbarth ML Tech+

Niemcy

nieznany

używany

na żądanie

INNO28234

Measuring method: CCD technology, measuring accuracy: +/-2min, measuring field: 360°. Includes software folder, printer, monitor, keyboard, mouse and various accessories. Documentation available. On-site inspection is possible.

więcej

Współrzędnościowa maszyna pomiarowa CNC

Wenzel LH 87

Niemcy

2005

używany

na żądanie

INNO28232

Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring plate dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection is possible.

więcej

Współrzędnościowa maszyna pomiarowa CNC

Wenzel LH 87 3 D

Niemcy

2006

używany

na żądanie

INNO28217

Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible.

więcej

System pomiaru masy powierzchniowej

Scantech HF3 XT10

Niemcy

2022

używany

na żądanie

INNO28151

A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible.

więcej

Współrzędnościowa maszyna pomiarowa

Keyence XM-1500

Niemcy

2018

używany

na żądanie

INNO27850

Type: 3D coordinate measuring machine (CMM), measuring range X/Y/Z: 300mm/250mm/150mm. Documentation available. On-site inspection is possible.

więcej

Maszyna pomiarowa multisensorowa

Mahr MarVision MS662

Niemcy

nieznany

używany

na żądanie

INNO27836

Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.

więcej

Urządzenie do wstępnego ustawiania narzędzi

Kelch Seca 04 E

Niemcy

2011

używany

na żądanie

INNO27629

Travel X/Z: 400mm/500mm, tool holder: SK50, machine dimensions X/Y/Z: approx. 1000mm/360mm/1130mm, weight: approx. 275kg. Including tool adapter from SK50 to SK40 and VDI40. Control defective, but can be replaced according to the manufacturer. On-site inspection is possible.

więcej

System pomiaru produkcji 3D

Keyence XM-T2200

Niemcy

2018

używany

na żądanie

INNO27363

Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm, repeatability: +/-3µm, display error: +/-8µm, measuring modes: program measurements/single measurements/statistical measurements. Various accessories included. Documentation available.

więcej

Automatyczny system kontroli rentgenowskiej

Anritsu XR75

Niemcy

2018

używany

na żądanie

INNO27312

A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available.

więcej

Hydrauliczny system testowy

Niehues DN200-DN600

Niemcy

2019

używany

na żądanie

INNO27302

A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000.

więcej

Współrzędnościowa maszyna pomiarowa CNC

Tesa MH3D DCC

Niemcy

2008

używany

na żądanie

INNO27253

Measuring range X/Y/Z: 440mm/700mm/410mm, measuring uncertainty X/Y/Z: 2.5+3.9L/1000µm, probing deviation (MPEp): 3µm. Acceleration: 1730mm/s², traversing speed: 350mm/s, max. table load: 200kg, working temperature range: 19°C-21°C, operating temperature range: 13°C-35°C, air consumption: 21l/min, weight: approx. 400kg, control: Hexagon PC-DMIS. Documentation available. The coordinate measuring machine must be recalibrated.

więcej

Współrzędnościowa maszyna pomiarowa CNC

Mora Mytos

Niemcy

2005

używany

na żądanie

INNO26935

Measuring range X/Y/Z: 3000mm/1800mm/6000mm, measuring accuracy: ±(2.5 + L/300)µm. On-site inspection is possible.

więcej

Profilometr

Keyence VR-5200

Niemcy

2019

używany

na żądanie

INNO26798

Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm.

więcej

Optyczny system pomiarowy

Keyence IM-6125

Niemcy

nieznany

używany

na żądanie

INNO26781

Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision).

więcej

Komora do badań klimatycznych

Feutron Klimasimulation KPK 900l

Niemcy

2008

używany

na żądanie

INNO26599

Test chamber volume: 900 l, Temperature range: -40°C - +100°C, humidity range: 10 - 98, Test chamber weight: 750kg, refrigeration system weight: 480kg. Refrigerant, refrigerant quantity and operating pressure: R134a/0.8kg/18bar, R507/4.0kg/27bar, R23/1.0kg/27bar

więcej

Wszystkie oferty / Urządzenia pomiarowe i testowe