▷ Używana inżynieria procesowa i zakłady chemiczne z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Inżynieria procesowa i zakłady chemiczne

Dekanter 1 Dmuchawy 4 Inne maszyny i urządzenia 17 Komorowe prasy filtracyjne 1 Magazyny i zbiorniki 16 Mieszalnie 40 Młyny 9 Pompy 9 Prasy 1 Produkcja papieru 1 Sprężarki 23 Stacje uzdatniania wody 10 Systemy filtrujące 38 Wirówki 7

Innovac maszyny-uzywane

Inżynieria procesowa i zakłady chemiczne [61 - 80 of 177]

Filtr kasetowy

Sult PDMS 1/4

Niemcy

1998

używany

na żądanie

INNO30713

A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Urządzenie do odzyskiwania rozpuszczalników

Lömi LRA-50

Niemcy

1999

używany

na żądanie

INNO30676

An untested vacuum distillation unit/solvent recycling unit Lömi for the recovery of organic solvents is available. Volume: 50l, operating volume: 30l, distillation capacity range: 8l-20l/h, max. operating temperature: 250°C, protection: EX, vacuum pump type: LÖ/V 6, max. vacuum pressure: 80mbar. Machine dimensions X/Y/Z: approx. 1450mm/600mm/1800mm, weight: approx. 300kg. An on-site inspection is possible.

Sprężarka

Alup Allegro 8 P

Niemcy

2022

używany

na żądanie

INNO30671

Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible.

Młyn drobnoziarnisty

Alpine 630 UP

Niemcy

1976

używany

na żądanie

INNO30641

Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible.

Instalacja filtrów powietrza

Trotec Tac 6500

Niemcy

2020

używany

na żądanie

INNO30588

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Pompa próżniowa

Busch R5 RA 0305 D

Niemcy

2012

używany

na żądanie

INNO30580

A new oil-lubricated rotary vane vacuum pump Busch in the original packaging is available. Suction capacity: 360m³/h, ultimate pressure: 0.5hPa, motor power: 10kW, speed: 1800rpm, oil fill quantity: 6.5l. Machine dimensions X/Y/Z: approx. 1100mm/600mm/450mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Prasy filtracyjne

Schenk Orion 60x60

Niemcy

nieznany

używany

na żądanie

INNO30572

A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.

Zbiornik z mieszadłem

Speidel RO-Z-100-S

Niemcy

1999

używany

na żądanie

INNO30565

A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.

Młyn kulowy

Ruitong WM-30A

Niemcy

nieznany

używany

na żądanie

INNO30560

A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China

Zbiornik oleju opałowego

Tankschutz Philipp Doppelwand

Niemcy

2018

używany

na żądanie

INNO30473

An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible.

Linia do mokrej obróbki waflów

Robotechnik Europe OPTIwet ST30

Niemcy

nieznany

używany

na żądanie

INNO30389

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

Sprężarka

Sbn MSA 15/10-5000I VRG2

Niemcy

2015

używany

na żądanie

INNO30343

Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible.

Dmuchawa

Robuschi Robox ES 35/2C-RVP

Niemcy

2016

używany

na żądanie

INNO30333

A Robuschi (Gardner Denver) blower including a rotary valve and spare blower is available. Intake volume: 403m³/h, differential pressure: 300mbar, temperature increase: 35°C, power: 5kW, speed: 3900rpm, efficiency: 84.8%, motor power: 11kW. Includes Zeppelin AG11 rotary valve and replacement blower. Documentation available. On-site viewing possible.

Pompa wysokociśnieniowa

Bft HPI 4000/30

Niemcy

nieznany

używany

na żądanie

INNO30312

A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.

Młyn kulowy

Netzsch Mini Cer

Niemcy

2015

używany

na żądanie

INNO30256

A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Sprężarka

Atlas Copco Automan HP 5.5

Niemcy

nieznany

używany

na żądanie

INNO30236

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

Sprężarka

Blitz Monsun 22

Niemcy

2001

używany

na żądanie

INNO30195

Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Zbiornik magazynowy

C. F. Maier KK

Niemcy

2004

używany

na żądanie

INNO30192

Various barrels are available. 1) 12x as-new Speidel barrels with accessories. 2) 3x stackable tanks C. F. Maier KK, year of manufacture: 2004, capacity: 650l. An on-site inspection is possible.

Wirówka filtracyjna

Alfa Naval IFB 303X-73

Niemcy

2001

używany

na żądanie

INNO30169

An Alfa Naval disc stack centrifuge module for separating foreign oil from water-based coolants is available. Speed: 7500rpm, throughput with water-based coolant: approx. 480l/h, max. medium temperature: 70°C. Machine dimensions X/Y/Z: approx. 650mm/550mm/1200mm, weight: approx. 60kg. An on-site inspection is possible.

System mieszania

Khs Paramix CMX 28

Niemcy

1992

używany

na żądanie

INNO30135

A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.