▷ Używana inżynieria procesowa i zakłady chemiczne z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Inżynieria procesowa i zakłady chemiczne

Dekanter 1 Dmuchawy 3 Inne maszyny i urządzenia 13 Magazyny i zbiorniki 18 Mieszalnie 33 Młyny 9 Pompy 9 Produkcja papieru 1 Sprężarki 20 Stacje uzdatniania wody 6 Systemy filtrujące 27 Wirówki 6

Innovac maszyny-uzywane

Inżynieria procesowa i zakłady chemiczne [21 - 40 of 146]

Wirówka

Thermofischer Scientific Multifuge X3 FR

Niemcy

2018

używany

na żądanie

INNO29216

For high-performance applications with temperature-sensitive samples, with pre-cooling function, direct button and CFC-free cooling system. Temperature range: -10 to 40°C, connected load: 1950W, dimensions: 670x745x790mm, net weight: 142.5kg. Including 4x oval 1l bottles, 4x adapters for 15ml tubes, 4x white adapters and bottles, castors, rotor cross TX-1000 and set of 4 metal beakers TX-10000, with instructions for use and appliance test book, no maintenance or repairs, in good condition, little used. On-site inspection is possible.

Sprężarka

Kaeser SM11

Niemcy

1998

używany

na żądanie

INNO29194

A Kaeser compressor, a Kaeser refrigeration dryer and an ABB DC motor are available. 1) Oil-lubricated screw compressor Kaeser SM 11, year of manufacture: 1998, serviced: 2023, operating pressure: 10bar, volume flow: approx. 1100l/min, power: 7.5kW, machine dimensions X/Y/Z: approx. 600mm/650mm/850mm, weight: approx. 200kg. 2) Refrigeration dryer Kaeser TA 5, year of manufacture: 2012, serviced: 2023, refrigerant: R134a, operating pressure: 16bar. The condensate drain is defective. 3) DC motor ABB DMP 180-4LB, year of manufacture: 1998, power: 114.7kW, speed: 1800rpm, operating mode: continuous operation, insulation class: H-Rise F, weight: approx. 450kg. On-site inspection is possible.

Młyn młotkowy

Rematec RPM 650/K20.0

Niemcy

2020

używany

na żądanie

INNO29158

A Rematec hammer mill as good as new is available. Engine type: AlphaOne OMT-1-280M4, engine power: 108kW, engine speed: 1785rpm. Documentation available. On-site inspection is possible.

Sprężarka

Atlas Copco GA30VSD+FF

Niemcy

2014

używany

na żądanie

INNO29155

Two identical Atlas Copco compressors are available. Volume flow: 5.87m³/min, power requirement: 39.66kW, speed: 7300rpm, oil capacity: 20l, operating hours: approx. 50000h. Documentation available. On-site inspection is possible.

Pojemnik ze stali nierdzewnej

Niemcy

nieznany

używany

na żądanie

INNO29128

A total of 15 (15x) stackable IBC containers for bulk goods are available. The containers were used in the food industry for the storage of spices, but have no foreign odor. Volume: approx. 750l, steel type: stainless steel 1.4301, mandrel lid diameter: 400mm, drain disk valve: DN 250, container dimensions X/Y/Z: approx. 1200mm/1000mm/1450mm. On-site inspection is possible.

Disolwer kadziowy

Vollrath VDDX 50

Niemcy

1972

używany

na żądanie

INNO29126

A Vollrath multi-shaft mixing plant is available. Container volume: 700l, max. batch capacity: approx. 700kg, agitator disks: 3, agitator disk diameter: 275mm, speed: 2000rpm, motor power: 36kW, stroke: 950mm, machine dimensions X/Y/Z: approx. 2200mm/1250mm/2400mm, weight: approx. 2600kg. Documentation available. On-site inspection is possible.

Pompa próżniowa

Rietschle Twister VSB 120

Niemcy

2006

używany

na żądanie

INNO29114

Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.

Sprężarka

Atlas Copco GA 15 FF

Niemcy

2000

używany

na żądanie

INNO29059

Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible.

System mieszania

T-s-i mastermix gear basic

Niemcy

2014

używany

na żądanie

INNO29056

A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

Pompa

Allweiler/ksb NIT50-200U5 AW/Etabloc

Niemcy

2023

używany

na żądanie

INNO29042

Two unused Allweiler and KSB pumps are available. 1) Thermal oil centrifugal pump Allweiler NIT 50-200U5 AW4, year of manufacture: 2023, flow rate: 40m³/h, delivery head: 54m, power: 7.4kW, speed: 2900rpm, pumped medium density: 0.75kg/dm³, viscosity: 1mm²/s, pipe diameter: 203mm. 2) Reconditioned cooling water pump KSB Etabloc, year of construction: 2021, flow rate: 26m³/h, delivery head: 15.5m, viscosity: 1mm²/s, speed: 2915rpm, MEI: 0.7, pipe diameter: 116mm. The KSB pump was overhauled in 2023. Documentation available. On-site inspection is possible.

Silos dwukomorowy

Siloanlagen Achberg PP- oder PE-Granulat

Niemcy

2005

używany

na żądanie

INNO25198

Nine identical double-chamber silos are available. Material: aluminum AlMG 3, use: plastic granulate, capacity: 2x50m³, bulk density: 600kg/m³, diameter: 3500mm, height: 13780mm, weight: approx. 3410kg. Documentation available. On-site inspection is possible.

Sprężarka

Atlas Copco ZE5VSD

Niemcy

2022

używany

na żądanie

INNO28906

A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible.

Mikser porcyjny

Servolift MC

Niemcy

2015

używany

na żądanie

INNO28901

Load capacity container + product: 150kg, speed: 20rpm, nominal volume: 120l, max. density: 0.8kg/dm³, feed container volume: 5l-10l, weight: approx. 680kg. Including attachments. Documentation available. On-site inspection is possible.

Pompa próżniowa

Nash

Niemcy

2017

używany

na żądanie

INNO28886

Two Nash vacuum pumps in need of overhaul and one overhauled Nash vacuum pump are available. 1) Nash 2BE 1606 1EY3Z, year of manufacture: 2017. 2) Nash 2BE 1606 1EY3Z, year of manufacture: 2005. 3) Nash 2BE 1606 1EY3Z, year of manufacture: 2005. Machine dimensions X/Y/Z: approx. 2750mm/2600mm/19000mm. Documentation available. On-site inspection is possible.

Odkurzacz przemysłowy

Nilfisk VHW320 LC 5PP

Niemcy

2021

używany

na żądanie

INNO28826

A Nilfisk industrial vacuum cleaner for use in sensitive production environments is available. Power: 1.5kW, max. negative pressure: 18.5kPa, air volume flow: 192m³/h, container volume: 25l, main filter area: 1m², dust class: L/M/H. Machine dimensions X/Y/Z: approx. 800mm/450mm/1200mm, weight: approx. 86kg. Documentation available. On-site inspection is possible.

Sprężarka śrubowa

Boge SLF 271

Niemcy

2014

używany

na żądanie

INNO28818

A Boge compressor including external heat recovery is available. Air volume flow: 24.7m³/min, operating pressure: 13bar, motor power: 200kW, machine dimensions X/Y/Z: approx. 3150mm/1950mm/2150mm, weight: approx. 4700kg, operating hours: 65553h. Including refrigeration compressed air dryer DS 300, pre-filter F 260 P and after-filter F 260 M. Documentation available. On-site inspection is possible.

Sprężarka

Atlas Copco GA 132-FF

Niemcy

2006

używany

na żądanie

INNO28817

Two identical Atlas Copco compressors including external heat recovery are available. Drive power: 132kW, max. operating pressure: 13bar, volume flow: 17m³/min, water temperature at 90kW: 90°C/70°C, machine dimensions X/Y/Z: approx. 2800mm/1900mm/2000mm, weight: approx. 3200kg, operating hours 1/2: 64290h/64765h. Including bypass flap for air cooling and electrical main switch. Documentation available. On-site inspection is possible. Expected to be available from mid-April 2025.

Instalacja odpylania na mokro

Ulrich Venturi

Niemcy

2021

używany

na żądanie

INNO28789

A wet extraction system Ulrich Anlagen und Industrieservice is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, particle size: less than 1µm, separation efficiency: 97.5%, control system: Siemens S7. Including buffer tank, Almatec AHS 25 heavy-duty membrane pump, MSE 470-30 chamber filter press, working platform, stainless steel filtrate tank and discharge and cross conveyor screw. Documentation available. On-site inspection is possible.

Jednostka ekstrakcyjna

Nederman Filterkasten

Niemcy

2015

używany

na żądanie

INNO28787

A Nederman filter box extraction system is available. Filter: activated carbon, filter type: F7/F9/F11/activated carbon 1/activated carbon 2, power: 20kW, machine dimensions X/Y/Z: approx. 5000mm/2500mm/1500mm. Including steel frame, piping and extraction hoods. Documentation available. On-site inspection is possible.

Zbiornik mieszadła

Niemcy

nieznany

używany

na żądanie

INNO28771

A total of 4 storage tanks with integrated agitator are available. Volume: approx. 2800l, stirring capacity: 2kW. On-site inspection is possible.