▷ Używana inżynieria procesowa i zakłady chemiczne z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Inżynieria procesowa i zakłady chemiczne

Dekanter 1 Dmuchawy 4 Inne maszyny i urządzenia 14 Magazyny i zbiorniki 20 Mieszalnie 30 Młyny 11 Pompy 8 Prasy 1 Produkcja papieru 1 Sprężarki 23 Stacje uzdatniania wody 7 Systemy filtrujące 37 Wirówki 8

Innovac maszyny-uzywane

Inżynieria procesowa i zakłady chemiczne [21 - 40 of 165]

Sprężarka

Atlas Copco/schneider/donaldson GA 18/DK 3000 N/Ultrasep plus 30

Niemcy

1994

używany

na żądanie

INNO30529

A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

Zbiornik oleju opałowego

Tankschutz Philipp Doppelwand

Niemcy

2018

używany

na żądanie

INNO30473

An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible.

Linia do mokrej obróbki waflów

Robotechnik Europe OPTIwet ST30

Niemcy

nieznany

używany

na żądanie

INNO30389

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

Sprężarka

Sbn MSA 15/10-5000I VRG2

Niemcy

2015

używany

na żądanie

INNO30343

Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible.

Dmuchawa

Robuschi Robox ES 35/2C-RVP

Niemcy

2016

używany

na żądanie

INNO30333

A Robuschi (Gardner Denver) blower including a rotary valve and spare blower is available. Intake volume: 403m³/h, differential pressure: 300mbar, temperature increase: 35°C, power: 5kW, speed: 3900rpm, efficiency: 84.8%, motor power: 11kW. Includes Zeppelin AG11 rotary valve and replacement blower. Documentation available. On-site viewing possible.

Silos mieszający

Kreyenborg USM 8M3 ST

Niemcy

2015

używany

na żądanie

INNO30328

Three structurally similar mixing silos are available. Usable volume: 8m³, total volume: approx. 10m³, cylinder diameter: 1500mm, rotational speed: 30rpm, discharge format: feed hopper/feed pipe. One of the silos is somewhat older, and the remaining two have different media discharge styles. An on-site inspection is possible.

Dozownik

Wittmann Feedmax BS/6-315-50

Niemcy

2016

używany

na żądanie

INNO30326

Seven identical dosing units, including two suction stations (blowers) Wittmann, are available. 1) 7x plastic granulate dosing unit Wittmann Feedmax BS/6-315-50, year of manufacture: 2015, container volume: 15l, container diameter: 300mm, installation height: approx. 800mm, empty weight: approx. 15kg. 2) Blower Wittmann GS/6 05-XSB-50, year of manufacture: 2016, power: 2.2kW, vacuum line: DN50, negative pressure: 300mbar, conveying capacity: approx. 250kg/h, weight: approx. 92kg. Documentation available. An on-site inspection is possible.

Pompa wysokociśnieniowa

Bft HPI 4000/30

Niemcy

nieznany

używany

na żądanie

INNO30312

A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.

Instalacja odwadniająca

Celtec SP 400

Niemcy

2016

używany

na żądanie

INNO30260

A screw press for dewatering purposes is available. Screw diameter: 400mm, residual moisture range: 35%-45%, throughput range: 1t-4t/h, weight: approx. 4400kg. Documentation available. An on-site inspection is possible.

Młyn kulowy

Netzsch Mini Cer

Niemcy

2015

używany

na żądanie

INNO30256

A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Sprężarka

Atlas Copco Automan HP 5.5

Niemcy

nieznany

używany

na żądanie

INNO30236

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

Sprężarka

Blitz Monsun 22

Niemcy

2001

używany

na żądanie

INNO30195

Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Zbiornik magazynowy

C. F. Maier KK

Niemcy

2004

używany

na żądanie

INNO30192

Various barrels are available. 1) 12x as-new Speidel barrels with accessories. 2) 3x stackable tanks C. F. Maier KK, year of manufacture: 2004, capacity: 650l. An on-site inspection is possible.

Wirówka filtracyjna

Alfa Naval IFB 303X-73

Niemcy

2001

używany

na żądanie

INNO30169

An Alfa Naval disc stack centrifuge module for separating foreign oil from water-based coolants is available. Speed: 7500rpm, throughput with water-based coolant: approx. 480l/h, max. medium temperature: 70°C. Machine dimensions X/Y/Z: approx. 650mm/550mm/1200mm, weight: approx. 60kg. An on-site inspection is possible.

System mieszania

Khs Paramix CMX 28

Niemcy

1992

używany

na żądanie

INNO30135

A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Wirówka

Sew/elektror

Niemcy

2018

używany

na żądanie

INNO30125

Two cylindrical centrifuges with hinged lids from an unknown manufacturer, each equipped with two electric motors, are available. The centrifuges have fire damage, and the wiring and the hydraulic system must be renewed. An on-site inspection is possible.

Jednostka ekstrakcyjna

Schuko VacoClean 120

Niemcy

nieznany

używany

na żądanie

INNO30107

Main pipe connection diameter: 120mm, pressure difference: 8000Pa, volume flow: 1200m³/h, connections: 3, container volume: 175l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2300mm. An on-site inspection is possible.

Sprężarka

Kaeser CSD 102 T SFC/BS 61

Niemcy

2002

używany

na żądanie

INNO30101

Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible.

Zbiornik z mieszadłem

Sielmann

Niemcy

1997

używany

na żądanie

INNO30079

Material: stainless steel, stainless steel type: 1.4301, volume: 1900l. Including agitators. An on-site inspection is possible.

Jednostka ekstrakcyjna

Ult AC 3000

Niemcy

2010

używany

na żądanie

INNO30076

An oil and emulsion mist separator Umwelt Lufttechnik is available. Extraction capacity: 1200m³/h, fan capacity (free-blowing): 2000m³/h, negative pressure: 850Pa, min. separation efficiency: 99%, machine dimensions X/Y/Z: approx. 700mm/500mm/1150mm, weight: approx. 100kg. An on-site inspection is possible.