Innovac GmbH Used machines from Germany
Innovac maszyny-uzywane Inżynieria procesowa i zakłady chemiczne [1 - 20 of 148]
System-podnoszenia-ciśnienia-Ksb-Hya-Eco-K używany
System podnoszenia ciśnienia
Ksb Hya-Eco K
Niemcy
nieznany
używany
na żądanie
INNO29886
A KSB pressure boosting system with 2 vertical high-pressure pumps is available. Delivery head: 110m, max. operating pressure: 16bar, max. medium temperature: 70°C. An on-site inspection is possible.
Urządzenie-do-topienia-Nordson-ProBlue4 używany
Urządzenie do topienia
Nordson ProBlue4
Niemcy
nieznany
używany
na żądanie
INNO29883
A hot melt adhesive unit Nordson with the corresponding EPC-15 controller and PS40 power supply is available. Tank volume: 4l, temperature range: 40°C-230°C, heating capacity: approx. 2500W, heating time: 20-30min, machine dimensions X/Y/Z: approx. 550mm/350mm/500mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible.
Chłodnica-dwuślimakowa-Celsius-CWR500 używany
Chłodnica dwuślimakowa
Celsius CWR500
Niemcy
2011
używany
na żądanie
INNO29853
Two Celsius CWR500 are available. Application: drying, PED class: G, installation: horizontal, ambient temperature: 10-40°C, relative humidity: 50-70%, internal cleaning: dry, external cleaning: dry, capacity: 1500kg/h, inlet temperature: 20°C, outlet temperature: 60°C, operation: continuous without product change, thermal fluid: saturated steam (120°C, 2bar), specific heat capacity: 2114 J/kgK, density: 1120.6 kg/m³, dynamic viscosity: 12.96x10⁻⁶ Pa·s, nominal operating pressure: 1bar, available flow (NWP): 100kg/h, thermal fluid inlet temperature: 120°C, outlet temperature: 120°C, thermal capacity: 55kW, thermal power unit: 70kW, empty weight: 6.21t. Documentation available. An on-site inspection is possible.
Suszarka-łopatkowa-Köllemann-AJK-QTHSF-DN600 używany
Suszarka łopatkowa
Köllemann AJK-QTHSF-DN600
Niemcy
2004
używany
na żądanie
INNO29851
With screw heat exchanger, torus disc dryer, 4-shaft screw dryer continuous, material: stainless steel (304), capacity: ±6000l, trough dimensions: 5920x1970x600mm, outlet dimensions: 260x1500mm, with jacket (650+200l), operating pressure: -1 to 3bar, test pressure: 4.9bar, shaft heatable, max. temperature: 100°C, motor power: 15kW, voltage: 400V, mounted on frame, length: 8500mm, width: 2400mm, height: 1600mm, weight: 17t. An on-site inspection is possible.
Zbiornik-ciśnieniowy-Regensburger-Faßfabrik używany
Zbiornik ciśnieniowy
Regensburger Faßfabrik
Niemcy
1972
używany
na żądanie
INNO29834
Capacity: 4517l, operating pressure at 20°C: 3atü. An on-site inspection is possible. Can be used for liquids.
Stabilizator-Keyence-SJ-H używany
Stabilizator
Keyence SJ-H
Niemcy
nieznany
używany
na żądanie
INNO29783
A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible.
Pompa-dozująca-Viscotec używany
Pompa dozująca
Viscotec
Niemcy
nieznany
używany
na żądanie
INNO29778
A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible.
Jednostka-ekstrakcyjna-Schmidt-Kranz-and-Co.-Airator używany
Jednostka ekstrakcyjna
Schmidt, Kranz & Co. Airator
Niemcy
nieznany
używany
na żądanie
INNO29748
A mobile welding fume extraction unit Schmidt & Kranz is available. Air flow rate: approx. 1800m³/h, power: 1.5kW. An on-site inspection is possible.
Jednostka-ekstrakcyjna-Teka-Filtercube-2H używany
Jednostka ekstrakcyjna
Teka Filtercube 2H
Niemcy
2019
używany
na żądanie
INNO29727
A filter system Teka is available. Air flow rate: 5000m³/h, motor power: 4kW, machine dimensions X/Y/Z: approx. 700mm/1000mm/2700mm. Includes control cabinet/control unit and a few folding pipes. Documentation available. An on-site inspection is possible.
Dozownik-Sonderhoff-henkel-DM-402 używany
Dozownik
Sonderhoff/henkel DM 402
Niemcy
2018
używany
na żądanie
INNO29661
Two custom-made, yet reprogrammable and modifiable mixing and metering systems for 2-component polyurethane mixtures are available. 1) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2011, mixing head: MK650, output rate: 0.08g–0.15g/s, material: 2K PU foam, robot travel X/Y/Z: 1000mm/800mm/250mm, max. application speed at R=6mm: 9m/min, max. travel speed: 20m/min, max. acceleration: 5m/s², table dimensions X/Y: 485mm/700mm. 2) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2018, mixing head: MK125MP, output rate: 0.5g–2g/s, material: Fermapor, robot travel X/Y/Z: 2500mm/1250mm/300mm, max. application speed at R=5mm: 13m/min, max. travel speed: 58m/min, max. acceleration: 10m/s², table dimensions X/Y/Z: 2x 1200mm/1250mm. Both systems include peripheral devices and systems for monitoring and controlling temperature, consistency, mixing, refilling, and other processes. The systems can presumably be adapted to any mixing ratio – exclusively for polyurethane. Documentation available. An on-site inspection is possible.
Jednostka-ekstrakcyjna-Wieland-VS-3-T używany
Jednostka ekstrakcyjna
Wieland VS-3 T
Niemcy
1987
używany
na żądanie
INNO29563
A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible.
Sprężarka-Tecumseh-TAG4546Z używany
Sprężarka
Tecumseh TAG4546Z
Niemcy
2012
używany
na żądanie
INNO29546
A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible.
Pompa-wysokociśnieniowa-Grundfos-CR-8-100-CR-16-30-CRV2-150 używany
Pompa wysokociśnieniowa
Grundfos CR 8 100/CR 16-30/CRV2-150
Niemcy
nieznany
używany
na żądanie
INNO29545
Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.
System-filtrujący-Donaldson-DFO-4-16-R używany
System filtrujący
Donaldson DFO 4-16-R
Niemcy
2010
używany
na żądanie
INNO29541
A Donaldson filter system including a cyclone with fan is available. 1) Donaldson DFO 4-16-Rm filter unit, year of manufacture: 2010, power: 18.5kW, weight: approx. 1600kg. 2) Cyclone with Donaldson/Rucon FQ 561/N4 RD 0 centrifugal fan, year of manufacture: 2010, speed: 2920 rpm, temperature: 60°C. The filters are somewhat corroded. Documentation available. On-site inspection is possible.
Maszyna-do-topienia-Sm-Klebetechnik-GX7511.38 używany
Maszyna do topienia
Sm Klebetechnik GX7511.38
Niemcy
2017
używany
na żądanie
INNO29506
A drum melter SM Klebetechnik for melting and conveying hot melt adhesives from 200 liter drums is available. Power: 20kW, max. operating temperature: 180°C, temperature accuracy: +/-1°C, temperature sensor: PT-100, pump capacity: 320kg/h, drum volume: 200l, filling heads: 2, machine dimensions X/Y/Z: approx. 1900mm/850mm/2800mm, weight: approx. 650kg, control: Siemens Simatic S7-1200, operating hours: 87h, pump hours: 15h. Documentation available. On-site inspection is possible.
Ściana-natryskowa-Rippert-RWS-5000 używany
Ściana natryskowa
Rippert RWS 5000
Niemcy
1997
używany
na żądanie
INNO29498
A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.
Mikser-beczkowy-Müller-FTM-300-MG1 używany
Mikser beczkowy
Müller FTM 300 MG1
Niemcy
2014
używany
na żądanie
INNO29490
Two identical mixers from Müller GmbH are available. Payload: 200kg, process: Tumbling/mixing, bung drum volume range: 100l-200l, mixing speed: 15rpm, drum diameter: 560mm, max. drum height: 885mm, mixing angle range: 0°-180°, machine dimensions X/Y/Z: approx. 1400mm/2000mm/1800mm. One of the machines was used sporadically, the other hardly ever. Documentation available. On-site inspection is possible.
System-odwróconej-osmozy-Mwt używany
System odwróconej osmozy
Mwt
Niemcy
nieznany
używany
na żądanie
INNO29472
A MWT reverse osmosis system is available. Capacity: approx. 800l/h. On-site inspection is possible.
Zbiornik wysokociśnieniowy
Linde D 200 V21,9
Niemcy
2019
używany
na żądanie
INNO29467
Two Linde high-pressure tanks are available for the storage of hydrogen (GH2/GHe). Diameter: 2000mm, height: approx. 10600mm, wall thickness: 100mm, usable volume: 21.9m³/3600Nm³, max. operating pressure: 200bar, medium weight hydrogen/helium: 305kg/465kg, empty weight: 45000kg. Documentation available. On-site inspection is possible.
Mieszalnik-szybki-Henschel-FM1000 używany
Mieszalnik szybki
Henschel FM1000
Niemcy
1994
używany
na żądanie
INNO29425
A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible.