Warp Beam

Liba

Germany

1991

used

on request

INNO29820

These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible.

more

Cart Beam Punch

Leiner KKD-50

Germany

2003

used

on request

INNO29794

Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

more

Cart Beam Punch

Leiner KKD-30

Germany

2000

used

on request

INNO29793

Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

more

Cart Beam Punch

Leiner KKD-50

Germany

2004

used

on request

INNO29792

Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

more

Fabric Laying Machine

Kuris

Germany

unknown

used

on request

INNO29700

A fabric spreading machine Kuris is available. Length: 13000mm, belt width: 1800mm, width: 2150mm. Includes Pionier Super PC Electronic control and unwinding device. Documentation available. An on-site inspection is possible.

more

Air and Fiber Management System

Trützschler/protec FBK 536/2400

Germany

1998

used

on request

INNO29463

A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible.

more

Textile Printer

Dtg Viper 2

Germany

unknown

used

on request

INNO29445

Printing technology: piezoelectric inkjet printing, print resolution X/Y: 1440dpi/1440dpi, print area X/Y: 615mm/415mm, machine dimensions X/Y/Z: approx. 1300mm/800mm/500mm, weight: approx. 80kg. The print heads as well as the ink and cleaning hoses must be repaired. Includes software CD and several printing plates/formats. Documentation available. An on-site inspection is possible.

more

Pillow Filling Machine

Nowo VAC/PA-1200/RKT-MINI

Germany

1995

used

on request

INNO29442

An ACG Nowo (ACG Kinna Automatic) pillow machine for processing cotton and for filling in textiles for pillow production is available. Documentation available. On-site inspection is possible.

more

Sewing Machine

Mauser MA335

Germany

unknown

used

on request

INNO29419

A Mauser sewing machine is available. Stitch type: lockstitch, max. stitch length: 6mm, max. presser foot lift: 14mm, speed: 2800rpm, workspace: 265mm, weight: approx. 55kg. Documentation available. An inspection on site is possible.

more

Winding Machine

Sahm 260 E

Germany

1995

used

on request

INNO29349

A winding machine SAHM for the textile industry is available. Heads: 182, core: 90mm, stroke: 400mm. Conversion to 200/250 is possible. On-site inspection is possible.

more

Winding Machine

Sahm 400E

Germany

1999

used

on request

INNO29135

A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible.

more

Textile Laser Cutting Machine

Sei Laser Mercury 2030 Conveyor 3

Germany

2023

used

on request

INNO29012

Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available.

more

Laser Cutting Machine

Cadcam FB 2000

Germany

unknown

used

on request

INNO28830

A CadCam CO2 laser cutting machine for the textile, wood, paper and plastics industries is available. Working dimensions X/Y: 2000mm/3000mm, max. axis speed: 1m/s, acceleration: 2G. Including various accessories. Documentation available. On-site inspection is possible.

more

3-Needle Hemming Machine

Juki MF7913

Germany

unknown

used

on request

INNO28742

A 3-needle hem sewing machine with trimming device (high-speed cylinder bed coverstitch machine with integrated thread trimmer and trimming device) Juki is available. Stitch type: triple coverstitch, needle gauge: 5.6mm, sewing speed: 6000 stitches/min, table top dimensions X/Y: 1060mm/600mm, needle: UY128GAS 9S-14S, stitch length range: 0.9mm/4.5mm, control: SC921B, control panel: CP18B. Documentation available. On-site inspection is possible.

more

Sectional Warping Machine

Textima DS 42/30

Germany

1986

used

on request

INNO27521

There are 6 warping machines and 1 warp knitting machine available. 1) Warping machine Textima DS 42/30, year of construction: 1986, positions: 1170, warping speed: 500m/min. 2) Warping machine Textima DS 42/30, year of construction: 1986, positions: 672, warping speed: 500m/min. 3) Warping machine Textima DS 42/30, year of manufacture: 1986, positions: 1216, warping speed: 500m/min. 4) Warping machine Textima DS 42/30, year of construction: 1986, positions: 1344, warping speed: 500m/min. 5) Warping machine Textima DS 42/30, year of manufacture: 1986, positions: 700, warping speed: 500m/min. 6) Textima DS 42/30 warping machine, year of manufacture: 1986, positions: 1216, warping speed: 500m/min. All warping machines were equipped with yarn monitoring devices, lint monitors or camera monitoring (CAM-SCAN and Protecha) and KFD brakes. 7) Warp knitting machine Textima Liba Excentra type 94, can be inspected on site.

more

Slitting and Winding System

Calator/weiss/bastian SEM-SRE

Germany

1988

used

on request

INNO28005

A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible.

more

Sewing Machine

Dürkopp/yamato/juki/pfaff ZF1020-X4DF-20/LH

Germany

unknown

used

on request

INNO27774

Four industrial sewing machines are available. 1) Dürkopp. 2) Yamato ZF1020-X4DF-20/BT13. 3) Juki LH-1152-4. 4) Pfaff 439-3.

more

Carpet Cutting Machine

Germany

1995

used

on request

INNO27648

A carpet tile cutting machine is available. Working width: 2000mm, machine dimensions X/Y/Z: approx. 2100mm/4500mm/2500mm, weight: approx. 3000kg. The machine cuts carpeting into 4 square tiles using automatic recognition by cameras (year of manufacture: 2005). The machine was part of a larger system and is therefore no longer able to run independently. In order to be able to run independently, the system must be completely rebuilt/reprogrammed in terms of PLC technology. Documentation available. On-site inspection is possible.

more

Sewing Machine

Pfaff 461/463/1445/3337

Germany

1993

used

on request

INNO27646

There are four Pfaff sewing machines available: 1) Industrial sewing machine Pfaff 461. 2) Industrial sewing machine Pfaff 463. 3) Industrial sewing machine Pfaff 1445. 4) Industrial sewing machine Pfaff 3337.

more

Swing Arm Punch

Schön/hang 8L/1003SCDKG

Germany

1993

used

on request

INNO27645

A Schön swivel arm punching press and a Hang eyeletting machine are available. 1) Swivel arm punching machine Schön & Cie 8L, year of manufacture: 1973, pressing force: 18t, table dimensions X/Y: 900mm/450mm, swivel arm width: 350mm, stroke: 60mm, passage height: 83mm-183mm, oil capacity: 40l, weight: approx. 1200kg. 2) Eyeletting machine Constantin Hang 103 SCD KG, year of construction: 1993, machine dimensions X/Y/Z: approx. 600mm/1250mm/700mm, weight: approx. 50kg.

more

All Offers / Textile machinery