Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Other machines / Glass machinery
Ceramics, stones and minerals 3 Glass machinery 26 Municipal technique 2 Special machines 4 Vacuum technology 2 Waste disposal, recycling 22 Wastewater treatment 1
Innovac used-machines Glass machinery [1 - 20 of 26]
Continuous-Flow-Dryer-Smt-HTT-4.5-K-6-5 used
Continuous-Flow Dryer
Smt HTT 4.5 K 6-5
Germany
2012
used
on request
INNO32023
An SMT continuous drying system is available. Infeed height range: 850mm-950mm, process chamber length: 12500mm, heating zones: 9, bottom heating zones: 4, heating length: 4500mm, convection section: 4500mm, max. process temperature: 230°C, cooling zones: 12, cooling zone length: 6775mm, cooling units: 3, conveyor type: PTFE belts, conveyor width: 800mm, working width: 800mm, max. speed: 3m/min, top/bottom clearance: 30mm/0mm, exhaust connection diameter: 300mm, machine dimensions X/Y/Z: approx. 13000mm/2000mm/2350mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible.
more
Glass-Washing-Machine-Malnati-800-TNS used
Glass Washing Machine
Malnati 800 TNS
Germany
unknown
used
on request
INNO32006
A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.
more
Glass-Cutting-System-Hegla-VSG-A-46-MT used
Glass Cutting System
Hegla VSG-A 46 MT
Germany
2002
used
on request
INNO31843
A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible.
more
Glass-Tempering-Furnace-Efco-Glass-Temperer used
Glass Tempering Furnace
Efco Glass Temperer
Germany
2001
used
on request
INNO31728
A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment.
more
Glass-Furnace-Efco-Furnaces-2400-x-4200-Glass-Temp used
Glass Furnace
Efco Furnaces 2400 x 4200 Glass Temp
Germany
1997
used
on request
INNO31677
A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible.
more
Glass-Drilling-Machine-Schraml-Glastechnik-Top-Drill-TD118 used
Glass Drilling Machine
Schraml Glastechnik Top Drill TD118
Germany
unknown
used
on request
INNO31315
A double-sided glass drilling machine Schraml (Lisec-Group) is available. Glass inclination: 8°, max. processing height: 1300mm, max. glass length: 2500mm, max. glass thickness: 40mm, max. drilling diameter: 100mm, speed: 5000rpm, machine dimensions X/Y/Z: approx. 3000mm/900mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.
more
Glass-Cutting-System-Lisec-ESL-60-30RS used
Glass Cutting System
Lisec ESL-60/30RS
Germany
1998
used
on request
INNO31247
A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.
more
Lifting-Device-Hegla-bystronic-Isofix-LN6-D90-250 used
Lifting Device
Hegla/bystronic Isofix LN6-D90-250
Germany
2023
used
on request
INNO31059
Two vacuum lifting devices from Hegla and Bystronic for the glass industry are available. 1) Hegla Isofix LN6-D90-250, year of manufacture: 2023, load capacity: 250kg, suction cups: 6. 2) Bystronic, load capacity: 350kg, suction cups: 4. Documentation available. An on-site inspection is possible.
more
Sand-Blasting-Machine-S.a.g.-T3-T4 used
Sand Blasting Machine
S.a.g. T3/T4
Germany
2005
used
on request
INNO30958
Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible.
more
Glass-Grinding-Machine-Knopp-Glaskant-Combi used
Glass Grinding Machine
Knopp Glaskant-Combi
Germany
1992
used
on request
INNO30740
An old Knopp glass grinding machine for edge processing is available. Grinding belt dimensions X/Y: 1830mm/100mm, glass types: float glass/mirror glass/furniture glass/table tops, grinding wheel diameter: 200mm, table dimensions X/Y: 900mm/1400mm, machine dimensions X/Y/Z: approx. 1300mm/1500mm/1700mm, weight: approx. 500kg. On site inspection is possible.
more
Glass-Washing-Machine-Lisec-VHW-20-6 used
Glass Washing Machine
Lisec VHW-20/6
Germany
2008
used
on request
INNO30489
A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement.
more
Doubler-Sided-Grinding-and-Polishing-Machine-Bottero-222L used
Doubler-Sided Grinding and Polishing Machine
Bottero 222L
Germany
2018
used
on request
INNO29999
Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.
more
Double-Sided-Glass-Grinding-and-Washing-Machine-Scheppach-Abb-Kuka--2500-C4-0E used
Double-Sided Glass Grinding and Washing Machine
Scheppach/ Abb/ Kuka/ 2500 C4/0E
Germany
2012
used
on request
INNO29905
A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible.
more
Automatic-Grinding-Machine-Carl-Zeiss-OVS-250 used
Automatic Grinding Machine
Carl Zeiss OVS 250
Germany
1990
used
on request
INNO29726
A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.
more
Sand-Blasting-System-Mhg-Glasmaster-1500-Automatic used
Sand Blasting System
Mhg Glasmaster 1500 Automatic
Germany
1999
used
on request
INNO29606
Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible.
more
CNC-Glass-Processing-Machine-Mdi-MP500-CE used
CNC Glass Processing Machine
Mdi MP500-CE
Germany
2009
used
on request
INNO29151
A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.
more
Glass-Cutting-Machine-4jet-Microtech-Diamond-M used
Glass Cutting Machine
4jet Microtech Diamond M
Germany
2020
used
on request
INNO27594
Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available.
more
Welding-System-Schwalbach-HP1500-HG7000S used
Welding System
Schwalbach HP1500/HG7000S
Germany
unknown
used
on request
INNO27489
A Schwalbach high-frequency welding system for dielectric heating for the glass industry is available. Connected load: 17kVA, generator output: 7kW, frequency: 2712MHz, transmitter tube: 2xTB6/4000, high voltage: 7000V DC, overload cut-off from: 2100mA. Documentation available. On-site inspection is possible.
more
Glass-Drilling-Machine-Busetti-Gio-1250 used
Glass Drilling Machine
Busetti Gio 1250
Germany
2010
used
on request
INNO27461
A double-sided Busetti glass drilling machine is available. Drilling heads: 2, drilling dimensions X/Y: 1250mm/1450mm, min. drilling diameter: 3mm, max. drilling diameter both drills/with top drill: 130mm/220mm, speed: 4000rpm, max. glass thickness: 38mm. Machine dimensions X/Y/Z: approx. 4500mm/2050mm/2300mm, weight: approx. 1700kg. An on-site inspection is possible.
more
Roller-Conveyor-Oven-Dorn-and-Schröder-ROHO-70-10-600 used
Roller Conveyor Oven
Dorn & Schröder ROHO-70/10/600
Germany
2020
used
on request
INNO27444
A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 3
Automation-technology 62
Beverage-filling-technology 41
Complete-production-lines 2
Construction-machinery 31
Energy-management 148
Food-processing-and-beverage 158
Material-storage 66
Materials-handling-technology 73
Measurement-and-testing 76
Medical-equipment 14
Metal-processing-machines 1210
Mining 6
Office-equipment 3
Other-machines 60
Packaging-machines 251
Pharmaceutical-and-cosmetics 18
Plastics-processing-machines 178
Printing-machines 85
Process-equipment-and-chemistry 184
Packaging-material-machinery 89
Robotics 34
Surplus-goods 5
Textile-machinery 92
Utility-vehicles 12
Woodworking-machines 100