Innovac GmbH Used machines from Germany
Innovac used-machines Waste disposal, recycling [1 - 20 of 24]
Hydraulic-Briquette-Press-Nestro-NBV-55 used
Hydraulic Briquette Press
Nestro NBV 55
Germany
unknown
used
on request
INNO32812
Throughput capacity: approx. 50-75kg/h, motor power: 5.5kW, on-site inspection is possible.
Shredder-Lindner-Jupiter-3200 used
Shredder
Lindner Jupiter 3200
Germany
2010
used
on request
INNO32590
A shredder with control cabinet, three spare motors and discharge conveyor is available: 1) Lindner Jupiter 3200 shredder, dimensions: 6500x2500x3200mm, weight: 36t, operating hours: 58545h, with hopper, operator panel and hydraulic power unit. 2) Control cabinet for Jupiter 3200, dimensions: 3000x2000x600mm, weight: 980kg, with frequency converter, water cooling units and recooling unit. 3) Spare motor ABB M3BP 315LKA 6, power: 160kW, speed: 994rpm, IE3, dimensions: 1200x800x600mm, weight: 1.41t, is unused. 4) 2x spare motor Schorch 315L IMB3, power: 160kW, speed: 988rpm, dimensions: 1200x800x600mm, weight: 1.3t. 5) Inclined conveyor FC H101 1200/9200, dimensions: 9200x1500x1800mm, weight: 1.7t. The machine was regularly serviced by the manufacturer. During annual rotor maintenance, the rotor was fully hardfaced. The track was retensioned every three months. New motors with energy efficiency class IE3 were installed in 2021. The foreign object flap was replaced in 2024. Two couplings were replaced in 2024. The machine is operational. An on-site inspection is possible. The machine is not connected to the power supply.
Pyrolysis-Plant-Pyreg-P500 used
Pyrolysis Plant
Pyreg P500
Germany
2020
used
on request
INNO32447
Design: modular containerized system, process: continuous pyrolysis/thermochemical carbonization, reactors: 2, feedstocks: wood/landscape maintenance material/biomass, thermal output: approx. 150kW, biochar production: approx. 300t/year, operating mode: autothermal, flue gas recirculation: available, burner: FLOX, discharge: water-cooled and airtight, degree of automation: fully automatic, control: Siemens S7-300, operator panel: Siemens TP1200 Comfort, automatic mode operating hours: approx. 7069h. Process container dimensions X/Y/Z: approx. 9000mm/3000mm/2800mm, process container weight: approx. 14t, flue gas treatment container dimensions X/Y/Z: approx. 3000mm/3000mm/2800mm, flue gas treatment container weight: approx. 4t. Including Bruns walking floor container with approx. 30m³ dosing hopper, inclined screw conveyor, bagging station and conveying spirals. A drying system for wood chips is optionally available. Documentation available. An on-site inspection is possible.
Horizontal-Baling-Press-Hsm-AK-10-900 used
Horizontal Baling Press
Hsm AK 10/900
Germany
1987
used
on request
INNO32303
Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible.
Bale-Press-Hsm-155.2-VL used
Bale Press
Hsm 155.2 VL
Germany
2001
used
on request
INNO32062
Press force: 16t, Feed opening dimensions X/Y: 1100mm/590mm, Chamber dimensions X/Y/Z: 1100mm/700mm/1130mm, Bale dimensions X/Y/Z: 1100mm/700mm/950mm, Max. bale weight: 200kg, Tying: 4-way vertical, Throughput: approx. 4-8 bales/h, Machine dimensions X/Y/Z: approx. 1450mm/950mm/2400mm, Weight: approx. 950kg. No UVV inspection and the hydraulic oil has been drained. The baler has not been cleaned. An on-site inspection is possible.
Bale-Press-Mac-Fab-MF-LH300 used
Bale Press
Mac Fab MF LH300
Germany
2020
used
on request
INNO31698
A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible.
Shredder-Burghardt-PS-Starter used
Shredder
Burghardt PS Starter
Germany
2021
used
on request
INNO30995
A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.
Dewatering-Machine-Hiller-DCH76-402 used
Dewatering Machine
Hiller DCH76-402
Germany
2010
used
on request
INNO30966
A Hiller two-phase centrifuge for solid-liquid separation and dewatering is available. Drum speed: 2700rpm, max. operating speed: 2650rpm, max. feed material density: 1.3kg/dm³, drum inner diameter: 752mm, drum wall thickness: 20mm, drum material: 1.4470, max. operating temperature: 50°C, max. operating pressure: 0bar, motor power: 75kW. Machine dimensions X/Y/Z: approx. 5100mm/2300mm/1750mm, weight: approx. 11600kg. Documentation available. An on-site inspection is possible. Image is an example.
Shredder-Erdwich-M600-1-600 used
Shredder
Erdwich M600/1-600
Germany
2021
used
on request
INNO30878
A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.
Shredder-Vecoplan-VAZ-1300-M-KN used
Shredder
Vecoplan VAZ 1300 M KN
Germany
2008
used
on request
INNO30680
A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.
Pyrolysis-Plant-Pyreg-P-500 used
Pyrolysis Plant
Pyreg P 500
Germany
2014
used
on request
INNO30570
An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible.
PET-Press-Strautmann-BP-900 used
PET Press
Strautmann BP 900
Germany
2008
used
on request
INNO30474
A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible.
Regeneration-Plant-Erema used
Regeneration Plant
Erema
Germany
1988
used
on request
INNO29589
A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible.
Single-Shaft-Shredder-Gross-GAZ-62 used
Single-Shaft Shredder
Gross GAZ 62
Germany
2011
used
on request
INNO28119
A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.
Knife-Gate-Valve-Watergates-DN500 used
Knife-Gate Valve
Watergates DN500
Germany
2020
used
on request
INNO27675
Four identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible.
Shredder-Neue-Herbold-BM-170-260 used
Shredder
Neue Herbold BM 170/260
Germany
2016
used
on request
INNO27548
Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.
Paper-Press-Allweiler-SFDR10 used
Paper Press
Allweiler SFDR10
Germany
1978
used
on request
INNO26786
Qn: 47l/min, Qv: 2750l/min, Hn: 75mm²/s, Δp: 5bar, P: 1.5kW.
Vertical-Crusher-Krupp used
Vertical Crusher
Krupp
Germany
unknown
used
on request
INNO25670
Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.
Impact-Crusher-Pozatto-FL-35 used
Impact Crusher
Pozatto FL 35
Germany
unknown
used
on request
INNO25668
Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar.
Bale-Press-Bema-BMF-650 used
Bale Press
Bema BMF 650
Germany
2016
used
on request
INNO24368
Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h.