Glass Cutting Table

Bottero 100BBM

Germany

2001

used

on request

INNO26087

A Bottero glass cutting machine is available. Cutting thickness range: 2mm-19mm, max. glass dimensions X/Y: 3650mm/2750mm, weight: approx. 1650kg. On-site inspection is possible.

more

Glass Cutting Machine

4jet Microtech Diamond M

Germany

2020

used

on request

INNO27594

Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available.

more

Shredder

Neue Herbold BM 170/260

Germany

2016

used

on request

INNO27548

Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

more

Glass Cutting Machine

Hegla Easycut II

Germany

2000

used

on request

INNO27496

Max. Glass sheet dimensions X/Y: 6000mm/3210mm, cutting accuracy: +/-0.5mm, cutting speed: 150m/min, weight: approx. 900kg. Documentation available. On-site inspection is possible.

more

Welding System

Schwalbach HP1500/HG7000S

Germany

unknown

used

on request

INNO27489

A Schwalbach high-frequency welding system for dielectric heating for the glass industry is available. Connected load: 17kVA, generator output: 7kW, frequency: 2712MHz, transmitter tube: 2xTB6/4000, high voltage: 7000V DC, overload cut-off from: 2100mA. Documentation available. On-site inspection is possible.

more

Glass Drilling Machine

Busetti Gio 1250

Germany

2010

used

on request

INNO27461

A double-sided Busetti glass drilling machine is available. Drilling heads: 2, drilling dimensions X/Y: 1250mm/1450mm, min. drilling diameter: 3mm, max. drilling diameter both drills/with top drill: 130mm/220mm, speed: 4000rpm, max. glass thickness: 38mm. Machine dimensions X/Y/Z: approx. 4500mm/2050mm/2300mm, weight: approx. 1700kg. An on-site inspection is possible.

more

Roller Conveyor Oven

Dorn & Schröder ROHO-70/10/600

Germany

2020

used

on request

INNO27444

A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible.

more

Glass Rack

Hegla MWGL

Germany

1990

used

on request

INNO27343

There are 30x glass racks PEL for inline transporters available. Load capacity: 6000kg, max. loading height: 2700mm, max. glass dimensions X/Y: 3210mm/2550mm, dimensions X/Y/Z: approx. 3340mm/750mm/3000mm, weight: approx. 350kg, years of construction: from 1990. On-site inspection is possible. Available from February 2025.

more

Vacuum Lifter

Schmalz SCH500/EVE-TR 4

Germany

2012

used

on request

INNO27311

A crane with a vacuum lifter Schmalz is available. Vacuum pump: Speed: 3300 rpm, power requirement: 0.21 kW, pumping speed: 4.7 m³/h, suction pressure: 850 mbar. Crane: Load capacity: 200kg.

more

Revolving Wall

Hegla Drehwand

Germany

2017

used

on request

INNO27125

A rotating wall for the glass industry is available. Weight: approx. 1300kg.

more

Glass Conveyor Machine

Hegla SF 2518

Germany

2017

used

on request

INNO27124

A Hegla SF 2518 vertical conveyor for the glass industry is available, weight: approx. 2700 kg.

more

Glass Conveyor Table

Lisec BTA

Germany

2016

used

on request

INNO27123

A Lisec horizontal conveyor field is available. Pressure: 6bar, max. conveyor weight distribution: 50kg/m², weight: approx. 1450kg.

more

Waste Water Treatment Plant

Agw Chargenbehandlung

Germany

2004

used

on request

INNO26974

A wastewater treatment plant based on batch treatment from Antech Gütling (AGW), which was used in the printed circuit board industry (electronics), is available. It consists of a waste water collection station, a batch treatment, a chemical dosing station, a sludge treatment, a post-filtration/pH final control and an exhaust air scrubber. The system treats rinsing water, acidic and alkaline concentrates as well as waste water from the resist developer, resist stripper and solder resist developer areas. The system does not treat solvents, paints, hydraulic oils, used etchings (ammoniacal/acidic), waste water containing chlorite or EDTA-based chemical copper. Capacity: approx. 3m³/h. Documentation is available.

more

Paper Press

Allweiler SFDR10

Germany

1978

used

on request

INNO26786

Qn: 47l/min, Qv: 2750l/min, Hn: 75mm²/s, Δp: 5bar, P: 1.5kW.

more

Rumbling Machine

Penta

Germany

2002

used

on request

INNO26484

Max. load capacity: 1t, with documentation, on-site inspection is possible.

more

Fire Escape

Germany

unknown

used

on request

INNO26284

Storey height: 3130mm, usable runner width: 1000mm, step width: 270mm, rise height: 185mm, runner plate thickness: 40mm, runner length: 2430mm, length: 5050mm, width: 2830mm, height: 11,000mm.

more

Screen Printing Machine

Benteler SP10

Germany

2016

used

on request

INNO26251

Max. printing format: 1200x650mm, max. printing speed: 1000mm/s, connected load: 8kW, with documentation, has been regularly serviced by the manufacturer, on-site inspection is possible.

more

Product Photography Rig

Canon, Styleshoots EOS 5D Mark III, Vertical

Germany

2015

used

on request

INNO26083

Length: 4100mm, width: 2050mm, height: 4100mm, very little documentation available, an inspection is possible.

more

Product Photography Rig

Canon, Styleshoots EOS 5D Mark III, Horizontal

Germany

2015

used

on request

INNO26082

The StyleShoots Horizontal, designed for flatlay product photography, contains a Canon EOS 5D Mark III with a Canon EF 24-105mm f/4L IS USM lens. Length: 2820mm, width: 2160mm, height: 2600mm, very little documentation available, an inspection is possible.

more

Glass Drilling Machine

Lattuda TP 1000.1H

Germany

2023

used

on request

INNO25681

Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used.

more

All Offers / Other machines