Innovac GmbH Used machines from Germany
Innovac used-machines Energy management [1 - 20 of 145]
Refrigerant-Dryer-Kaeser-TD-76 used
Refrigerant Dryer
Kaeser TD 76
Germany
2019
used
on request
INNO27768
Three identical Kaeser refrigeration dryers are available. Volume flow: 8.25m³/min, operating pressure: 16bar, air inlet: 3°C-55°C, ambient temperature: 3°C-45°C, coolant: R-513A, coolant volume: 1.5kg, machine dimensions X/Y/Z: approx. 800mm/1200mm/1200mm, weight: approx. 250kg. The copper parts of the machines have been attacked (spare parts carrier or in need of repair). Documentation available.
Recirculating-Cooling-Tower-Karlsruhe-gohl-ktk-K-18-28-3 used
Recirculating Cooling Tower
Karlsruhe (gohl-ktk) K 18-28-3
Germany
2002
used
on request
INNO27759
Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.
Transformer-Double-Substation-Scheidt-abb-areva-BEK250-420 used
Transformer Double Substation
Scheidt/abb/areva BEK250/420
Germany
2007
used
on request
INNO27753
A two-part Sheidt transformer station with two transformers is available. Rated power per transformer: 630kVA. Documentation available. On-site inspection is possible.
Transformer-Substation-Gräper-GA-450-330 used
Transformer Substation
Gräper GA 450/330
Germany
1994
used
on request
INNO27752
Transformer Heim, rated power: 400kVA, primary voltage: 10kV, insulation medium: oil-cooled, switchgear: medium voltage, cooling type: ONAN, cable connections: Medium voltage/low voltage, Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3500mm, Weight: approx. 15000kg-20000kg. Documentation available. On-site inspection is possible.
Pure-Steam-Generator-Stilmas-PSG-1500-DTS used
Pure Steam Generator
Stilmas PSG 1500 DTS
Germany
2002
used
on request
INNO27721
Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible.
Diesel-Three-Phase-Current-Aggregate-Volvo-stamford-steyr-TAD1631GE-HCI544F1-17S230 used
Diesel Three-Phase-Current Aggregate
Volvo/stamford/steyr TAD1631GE/HCI544F1/17S230
Germany
2024
used
on request
INNO27715
A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible.
Steam-Plant-Reining used
Steam Plant
Reining
Germany
2000
used
on request
INNO27710
A Reining waste gas heat recovery system is available. It receives the exhaust gases from the plant and currently generates approx. 25 t/h of steam from the heat of a hot rolling mill. The chimney and the heat exchangers were manufactured by Babcock-BSH around 1983. An on-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026.
Transformer-Leppert-dominit-SDO-800-20 used
Transformer
Leppert-dominit SDO 800/20
Germany
1975
used
on request
INNO27701
Rated power: 800kVA, operating mode: continuous operation, primary voltage: 20800V, secondary voltage: 20000V/480V, switching group: Dyn5, short-circuit voltage: 3.9%, short-circuit current: 2kA, cooling: ONAN, insulating weight (oil): approx. 490kg, primary current: 23.1A, secondary current: 1155A, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2150mm, weight: approx. 2250kg. Documentation available.
Pure-Steam-Generator-Finn-Aqua-500-H1 used
Pure Steam Generator
Finn Aqua 500 H1
Germany
1986
used
on request
INNO27674
Output at 45 PSIG: 440kg/h, max. pressure: 8bar, max. temperature: 121°C, material: stainless steel, steam: sterile, machine dimensions X/Y/Z: approx. 1200mm/800mm/2850mm. On-site inspection is possible.
Asynchronous-Three-Phase-Induction-Motor-Vem-DTSYX used
Asynchronous Three-Phase Induction Motor
Vem DTSYX
Germany
2005
used
on request
INNO27612
Three identical VEM three-phase high-voltage asynchronous motors are available. Rated power: 8.5MW (8500kW), voltage: 6000V, frequency: 50Hz, speed: 1500rpm, protection class: IP55, cooling: water, insulation class: F, bearings: roller bearings, vibration class: A, weight: approx. 30000kg. Including an oil lubrication unit overhauled in 2019 and 2x exciter cabinets. Documentation available. On-site inspection is possible.
Three-Phase-Synchronous-Motor-Abb-IM-B3 used
Three-Phase Synchronous Motor
Abb IM B3
Germany
unknown
used
on request
INNO27611
Ambient temperature: 0°C/+40°C, max. altitude over sea level: 1000m, rated voltage: 6kV/50Hz, rated speed: 1500rpm, rated power: 14MW (14000kW), design: B3 (floor-mounted), protection class: IP54, efficiency: over 95%, cooling system: air-water cooling, operating mode: continuous operation, starting method: direct starting, direction of rotation: bidirectional, insulation class: F (B), weight: approx. 25500kg. Including DC excitation, external lubrication unit, 6x RTD in stator windings and anti-condensation heating. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging.
Air-Conditioning-System-York-ARH-045-A used
Air Conditioning System
York ARH 045 A
Germany
unknown
used
on request
INNO27595
Air flow rate: 11500m³/h, cooling capacity: 45kW, heating capacity: 45kW, energy consumption cooling/heating: 16kW/16kW, EER: 3.19, temperature range: -10°C/46°C. Machine dimensions X/Y/Z: approx. 3200mm/2400mm/1200mm, weight: approx. 1200kg.
Diesel-Generator-Atmos-AT500-S-V used
Diesel Generator
Atmos AT500 S/V
Germany
2010
used
on request
INNO27536
Three identical Atmos generators are available. Rated output: 500kVA, rated voltage: 400V, rated current: 722A, power factor: 0.8, internal/external tank volume: 2000l/2300l, residual diesel: approx. 1000l per generator, weight: approx. 5600kg, control system: ComAp InteliCompact. Generator dimensions X/Y/Z: approx. 4500mm/1450mm/2600mm, external container dimensions X/Y/Z: approx. 2800mm/1800mm/2700mm, operating hours: Generator 1: 35h, Generator 2: 292h, Generator 3: 271h. Documentation available. On-site inspection is possible.
Surface-Cooler-Heatcraft-Europe-FC-PU06 used
Surface Cooler
Heatcraft Europe FC PU06
Germany
unknown
used
on request
INNO27520
A surface cooler with various small appliances is available. 1) Surface cooler Heatcraft Europe FC PU06DL02D3 1C4 33 B, volume flow: 62dm³. 2) KSB pump, year of manufacture: 2020, output: 4kW. 3) Lifting machine for coil holder Oerlikon HM-2529. 4) Blower Ferrari FR 1001 N04S/3RD 90, year of manufacture: 2019, speed: 1500 rpm, max. temperature: 100°C, power: 75kW. Documentation available. On-site inspection is possible.
Low-Voltage-System-Feag-Energoline used
Low Voltage System
Feag Energoline
Germany
2015
used
on request
INNO27517
Rated current: 2250A, rated impulse current: 75kA/125kA, degree of protection cabinet/floor: IP20/IP00, protection class: SK1, cable entry: bottom, main lines: 400V/230C AC, control lines: 110V DC, signal lines: 110V DC, number of panels: 7, panel equipment: panel 1: 4x NH00, panel 2: 2x NH1, panel 3: 2x NH2, panel 4: 2x NH3, panel 5-6: Siemens WLII 2000S+ETU25B, panel 7: Siemens BR6000 compensation. Documentation available. On-site inspection is possible.
Refrigerant-Dryer-Spx-hankison-kaeser-HHD470-AS-35 used
Refrigerant Dryer
Spx/hankison/kaeser HHD470/AS 35
Germany
2009
used
on request
INNO27488
A Kaeser screw compressor and a Hankison compressed air refrigeration dryer (SPX) are available. 1) Hankison HHD470 compressed air refrigeration dryer, year of manufacture: 2009, refrigerant: R407C, refrigerant quantity: 1.1kg, volume flow: 470m³/h, machine dimensions X/Y/Z: approx. 1000mm/450mm/800mm. 2) Kaeser AS 35 screw compressor, year of manufacture: 1985, output: 22kW, volume flow: 3.06m³/min, operating overpressure: 10bar, operating hours: 54577h, machine dimensions X/Y/Z: approx. 800mm/1500mm/110mm. On-site inspection is possible.
Emergency-Power-System-Mwm-piller-TBD232-V12-NKTB used
Emergency Power System
Mwm/piller TBD232 V12/NKTB
Germany
unknown
used
on request
INNO27472
A complete emergency power system is available in the sea container. Engine: Manufacturer: MWM, type: TBD 232 V12, power: 321 hp, coolant: water, speed: 1500 rpm. Generator: Manufacturer: Piller, type: NKTB, power range: 250kVA-275kVA, speed: 1500mm, operating hours: 3420h.
Dry-Recooler-Cabero-GC-DNC used
Dry Recooler
Cabero GC/DNC
Germany
2004
used
on request
INNO27460
Two identical Cabero dry coolers are available. Power requirement: 325kW, air volume: 212290m³/h, air speed: 2.66m/s, air pressure/geodetic altitude: 967mbar/400mbar/min, air inlet/outlet temperature: 4°C/8.5°C, medium: ethylene glycol 34%, medium inlet temperature: 13°C, nominal medium outlet temperature: 8°C, pressure loss: 40kPa, medium volume: 62.12m³/h, number of fans: 8. Dimensions X/Y/Z: approx. 5900mm/2400mm/2500mm, empty weight: approx. 2800kg. One of the appliances has a slight leak. Documentation available. On-site inspection is possible.
Plate-Heat-Exchanger-Alfa-Laval-thermofin-M10-TBN used
Plate Heat Exchanger
Alfa Laval/thermofin M10/TBN
Germany
2019
used
on request
INNO27451
There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available.
Refrigerating-Plant-Gohl-DT-27-Z-FM12 used
Refrigerating Plant
Gohl DT 27 Z-FM12
Germany
1999
used
on request
INNO27450
Motor power: 0.48 kW/1.9 kW, motor speed: 750 rpm/1500 rpm.