Innovac GmbH Used machines from Germany
Innovac used-machines Eroding machines [1 - 20 of 24]
Vertical-Eroding-Machine-Agie-Agietron-Impact-2 used
Vertical Eroding Machine
Agie Agietron Impact 2
Germany
2002
used
on request
INNO26738
Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of work bowl: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filling weight: approx. 4200kg, control: AgieVision. Documentation available.
Vertical-Eroding-Machine-Deckel-DE25-C used
Vertical Eroding Machine
Deckel DE25-C
Germany
1988
used
on request
INNO26712
Travel X/Y/Z: 500mm/400mm/350mm, distance table-pin nose: min. 250mm/max. 600mm. Work table clamping surface X/Y: 650mm/450mm, max. table load: 500kg, erosion limit load: approx. 300N. Internal dimensions of work bowl X/Y/Z: 845mm/635mm/340mm, max. filling height:: 300mm, max. workpiece height: 260mm. Documentation available. On-site inspection is possible.
Wire-EDM-Machine-Charmilles-ROBOFIL-4030-SI used
Wire EDM Machine
Charmilles ROBOFIL 4030 SI
Germany
2000
used
on request
INNO26563
Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.
Vertical-EDM-Machine-Charmilles-35P used
Vertical EDM Machine
Charmilles 35P
Germany
2001
used
on request
INNO26561
Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible.
Spark-Erosion-Machine-Heun-MD-435 used
Spark Erosion Machine
Heun MD-435
Germany
2017
used
on request
INNO26434
X-travel: 400mm, y-travel: 350mm, z-travel: 250mm, W-travel: 300mm, max. load: 400kg, length: 1090mm, width: 1750mm, height: 2075mm, weight: 1.2t, with documentation.
Start-Hole-EDM-Machine-Ocean-Technologies-OCT-0035 used
Start Hole EDM Machine
Ocean Technologies OCT-0035
Germany
2011
used
on request
INNO26260
Z-axis: 300mm, rotational speed: 0-10/min or variable, electrode diameter: 0-6mm, number of tools: 1, max. tool length: 300mm, connected load: 2.5kVA, weight: 100kg, operating hours: 250h, with various electrode holders and guides, cooling water pump, on-site inspection is possible.
Vertical-Eroding-Machine-Agie-DDl-004 used
Vertical Eroding Machine
Agie DDl-004
Germany
unknown
used
on request
INNO26192
Controls: AGIE PULS 30L, connected load: 11kVA, an inspection on site is possible.
Wire-EDM-Machine-Agie-Charmilles-Robofil-690 used
Wire EDM Machine
Agie Charmilles Robofil 690
Germany
2007
used
on request
INNO26151
X-travel: 800mm, y-travel: 600mm, z-travel: 400mm, U-travel: 60mm, V-travel: 60mm, workpiece dimensions: 1300x910x400mm, max. workpiece weight: 2.3t, dielectric capacity: 210l, connected load: 10kVA, length: 2550mm, width: 2350mm, height: 2200mm, weight: 4.84t, with generator, wire guide, protective cabin, documentation and other accessories, on-site inspection is possible.
CNC-Roller-Eroding-Machine-Waldrich-Siegen-EDT-420-3-CNCx2500-13 used
CNC Roller Eroding Machine
Waldrich Siegen EDT 420/3 CNCx2500-13
Germany
1993
used
on request
INNO26129
Eroding diameter: 100-420mm, max. roll length: 2500mm, roll weight: 8t, eroding length: 11mm, number of electrodes: 60, length: 5000mm, width: 2000mm, height: 1200mm, weight: 25t, with documentation, inspection is possible.
Vertical-EDM-Machine-Ona-DATIC-D-360 used
Vertical EDM Machine
Ona DATIC D 360
Germany
1992
used
on request
INNO25985
Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine.
Wire-Cut-EDM-System-Mitsubishi-FX20K used
Wire-Cut EDM System
Mitsubishi FX20K
Germany
1999
used
on request
INNO25821
Max. load: 800kg, weight: 2.55t, the machine needs overhauling, the generator is defective, an inspection is possible.
Start-Hole-EDM-Machine-System-Castek-Mechatron-HK-24 used
Start Hole EDM Machine System
Castek Mechatron HK-24
Germany
2001
used
on request
INNO25805
Length: 1000mm, width: 1200mm, height: 2500mm, the machine has not been run for some time, an inspection is possible.
Vertical-Eroding-Machine-Agie-30L-MESS-DIG-RSF used
Vertical Eroding Machine
Agie 30L MESS DIG RSF
Germany
1979
used
on request
INNO25704
Connected load: 6.2kVA, weight: 325kg, with Head AGIE TESTA-10, weight: 120kg, the machine should be overhauled, an inspection is possible.
Vertical-Eroding-Machine-Agie-Charmilles-AGIETRON-EMT-1.10 used
Vertical Eroding Machine
Agie Charmilles AGIETRON EMT 1.10
Germany
unknown
used
on request
INNO25705
X-travel: 250mm, y-travel: 160mm, table dimensions: 420x250mm, max. workpiece height: 160mm, max. workpiece weight: 120kg, length: 1545mm, width: 1240mm, height: 1065mm, weight: 540kg, with documentation, the machine should be overhauled, an inspection is possible.
Vertical-EDM-Machine-Mitsubishi-EA12-VM-ADVANCE used
Vertical EDM Machine
Mitsubishi EA12 VM ADVANCE
Germany
2011
used
on request
INNO25463
Compressed air supply: 27l/min, length: 1750mm, width: 2050mm, height: 2235mm, weight: 3.7t.
Wire-EDM-Machine-Seibu-EW-A5-SGC used
Wire EDM Machine
Seibu EW-A5 SGC
Germany
1998
used
on request
INNO25246
Weight: 3t, with Power Supply Unit SW-A1CGC.
Vertical-EDM-Machine-Cdm-Rovella-C4 used
Vertical EDM Machine
Cdm Rovella C4
Germany
unknown
used
on request
INNO25227
Including various tool cones.
Spark-Erosion-Machine-Dieter-Hansen-450-S used
Spark Erosion Machine
Dieter Hansen 450 S
Germany
1983
used
on request
INNO25136
Mains voltage: 380V, connected load: 13kW, controls: Heidenhain TNC 125, the machine is in very good condition.
Vertical-Eroding-Machine-Aeg-elotherm-ELBOMAT-332P used
Vertical Eroding Machine
Aeg-elotherm ELBOMAT 332P
Germany
1989
used
on request
INNO24899
Controls: AEG-Elotherm ELOPULS, with documentation.
Wire-EDM-Machine-Agie-AGIE-CUT-CNC-100 used
Wire EDM Machine
Agie AGIE CUT CNC 100
Germany
1980
used
on request
INNO24562
There are three AGIE CUT CNC 100 available, year of construction 1/2/3: 1980/1979/1979, with accessories, machine 1 and 2 are functional, machine 3 serves as a source for spare parts.