▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [1 - 20 of 1021]

Tokarka karuzelowa

Schiess A.g. KE 125

Niemcy

1961

używany

na żądanie

INNO30498

Faceplate diameter: 1255mm, with complete documentation, without accessories. The machine is slightly worn and shows signs of use, the side support is missing, one spindle nut is defective, the gears and bearings of the table have been recently overhauled, and the machine has been serviced internally and externally. Viewing on site is possible.

System czyszczenia ultradźwiękowego

Gtb Gerätetechnik Brieselang USW 140-IND

Niemcy

nieznany

używany

na żądanie

INNO30496

An industrial ultrasonic cleaning system is offered. System type: multi-chamber cleaning system, stainless steel design. Tanks: 2, documentation available. Inspection possible by arrangement.

Prasa do gięcia krawędzi CNC

Trumpf TrumaBend V 1300

Niemcy

nieznany

używany

na żądanie

INNO30495

Offered is a hydraulic CNC press brake year of manufacture approx. 2005. Press force: 1300kN, bending length: 3230mm, column distance: 2690mm, usable height: approx. 385-535mm, stroke: 215mm, control: Trumpf TASC 6000, CNC backgauge, multi-axis system X/R/Z1/Z2, hydraulic tool clamping, front bending supports Support consoles, safety device: BendGuard / light curtains. Maintenance: Regular maintenance carried out by Trumpf, last inspection approx. April 2025. Viewing possible by arrangement.

Nożyce gilotynowe

Fasti Schröder 527

Niemcy

nieznany

używany

na żądanie

INNO30493

A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement.

Maszyna gwintująca

Microtap megatap 90-G12

Niemcy

1992

używany

na żądanie

INNO30492

Application range: large threads, breakage protection: from M3.0, capacity in stainless steel: up to M10, capacity in 9SMn28: up to M10, connected load: 2000W, with automatic Z-axis feed for automation. The machine is fault-free and operational, showing signs of use. With documentation and five holders. An on-site inspection is possible.

Maszyna do erodowania drutu

Charmilles ROBOFIL 240SL

Niemcy

2005

używany

na żądanie

INNO26686

Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.

Poziome centrum wiercenia i frezowania CNC

Haupt U. Co. SK 50

Niemcy

2000

używany

na żądanie

INNO30491

A horizontal boring and milling machine is offered: Control: Siemens Sinumerik 840 D, travel X/Y/Z: 2500mm/200mm/250mm, table clamping surface: special form length corresponding to X travel, tool holder: SK50 (DIN 2079), spindle speed: 40-2000rpm, dimensions X/Y: approx. 6400mm/2500mm, total weight: 7000kg. Inspection possible by appointment.

Centrum obróbcze z kolumną ruchomą

Axa DBZ 700

Niemcy

2007

używany

na żądanie

INNO30490

Offered is a travelling-column machining center with pendulum machining incl. one KUKA KRC1 year 1997 (KR150-2). Travel axes: X/Y/Z 2x900mm/600mm/700mm. Main spindle: Kessler DME 112, hollow shaft motor water-cooled: Speed: 30-6000rpm, tool holder: SK40, tool changer: disc 22 stations. Total weight: approx. 10000kg, measuring systems: Heidenhain LC 183, incl. chip conveyor, documentation. Inspection possible by arrangement.

Automatyczna tokarka wielowrzecionowa CNC

Index MS 22 C

Niemcy

2011

używany

na żądanie

INNO30486

A defective CNC 6-spindle lathe Index is available: Speed: 10000rpm, main spindle power: 8.7kW/15kW, max. bar diameter: 22mm, tool stations: 10, travel X/Z: 62mm/85mm, travel Y: +/-12mm, max. clamping diameter: 22mm, machine dimensions X/Y/Z: approx. 3350mm/1850mm/2900mm, weight: approx. 6000kg, control: Siemens 840C. Includes tool holders, Knoll coolant system, Iemca SIR MS 22 P bar loader, HandlingTech robot cell. One spindle must be refitted with new bearings and the synchron spindle must be replaced. Documentation available. An on-site inspection is possible.

Maszyna do wykrawania i cięcia

Mubea KBLH 500

Niemcy

nieznany

używany

na żądanie

INNO30484

A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible.

Tor chłodzący

Pennekamp

Niemcy

2004

używany

na żądanie

INNO30477

A continuous Pennekamp cooling line/belt cooling section is available. Belt width: 3800mm, pass through height: 400mm, zones: 8, burner: Pennekamp. Includes a partially existing spray system with mixing tank. Some control components have been removed. Documentation available. An on site inspection is possible.

Tor chłodzący

Pennekamp

Niemcy

2012

używany

na żądanie

INNO30476

A continuous cooling line/band cooling section Pennekamp is available. Belt width: 4500mm, pass-through height: 400mm, zones: 7, total length: approx. 23750mm. Some control components have been removed. Documentation available. An on-site inspection is possible.

Nożyce do blachy

Schneider

Niemcy

nieznany

używany

na żądanie

INNO30472

A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible.

Warsztatowa wytaczarka

J. Neu BA.A2.AC

Niemcy

2010

używany

na żądanie

INNO30471

Drilling unit / profile drilling machine Alzmetall AC32, drill head. The maintenance work includes: new disc spring set in the drill head (11/2025), new servo motor for speed adjustment (09/2025), new disc set for shaft 2 (approx. 09/2023) and a complete belt replacement (11/2024). Note: V ribbed belt is 1.4mm before the wear limit. Inspection by appointment possible.

Pionowe centrum obróbcze CNC

Brother TC-225

Niemcy

nieznany

używany

na żądanie

INNO30468

A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment.

Podwójna piła ukosowa

Emmegi Twin Libra TU/6

Niemcy

1998

używany

na żądanie

INNO30465

A double mitre saw Emmegi (Pressta Eisele) is available. Saw heads: 2, saw blade diameter: 500mm, speed: 2800rpm, cutting speed: 73m/s, usable cutting length: 6000mm, min. cutting length at 90°: 350mm, cutting angle range: approx. -22.5°/+45°, feed rate: 60mm/s, machine weight: approx. 2000kg. An on-site inspection is possible. Expected to be available from mid/late February 2026.

Podwójna piła ukosowa

Emmegi Single 2 500 TU6 P1250KG

Niemcy

1994

używany

na żądanie

INNO30464

A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

System czyszczący

Bvl Oberflächentechnik Rotocleaner 750

Niemcy

1996

używany

na żądanie

INNO30462

Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.

Wiertarka kolumnowa

Gillardon

Niemcy

1984

używany

na żądanie

INNO30461

Offered is a column drilling machine year of construction 1984, drive: VEM KPER 80 K 4, speed ranges: 3 step belt drive, spindle speed: approx. 1380rpm, quill stroke: approx. 120mm, MT2. Inspection is possible by appointment.

Frezarka CNC

Deckel Maho DMU 70 eVo linear

Niemcy

2005

używany

na żądanie

INNO30459

A Deckel Maho (DMG) CNC 5-axis milling machine is available. Travel range X/Y/Z: 750 mm/600 mm/520 mm, table dimensions X/Y: 700 mm/500 mm, max. table load: 350 kg, speed: 18,000 rpm, tool holder: HSK-63A, tool positions: 60, rapid traverse: 50m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 6500mm/3500mm/3500mm, weight: approx. 8500kg, control: Heidenhain MillPlusIT, operating hours: approx. 80,640h, spindle hours: approx. 33,873h. The table is slightly jerky. Documentation available. On-site viewing is possible. Expected to be available from March 2026.