Center Lathe

Colchester Triumph 2500

Germany

1989

used

on request

INNO32453

A center lathe with 2-axis digital readout is offered. Tool holder, coolant supply and transparent guard. Inspection possible by prior arrangement.

more

Center Lathe

Schaerer

Germany

unknown

used

on request

INNO32425

Thread-cutting gears, number of teeth: 30, 57, 60, 105, 120, 127, equipment: lead screw for thread cutting, separate feed system, automatic longitudinal and cross feed, change gear for feed and thread gearbox, back gear in the headstock, three-jaw chuck, cross slide and compound slide, four-way tool post, tailstock, an on-site inspection is possible.

more

Centre Lathe

Knuth Compass 200/1500

Germany

2001

used

on request

INNO32407

Total power: 6kW, voltage: 400V, frequency: 50Hz/3-phase. Documentation available. Inspection by appointment possible.

more

Universal Center Lathe

Tos Trencin SN 500S

Germany

1998

used

on request

INNO32385

Speed: 12.5-2000/min, with documentation. An on-site inspection is possible.

more

CNC Lathe

Spinner TTC 300 42SMMCY

Germany

2010

used

on request

INNO32374

A Spinner CNC lathe in need of repair is offered. Control: FANUC Series 31i-A, spindle operating hours: approx. 36824h. The lower turret is locked but incorrectly indicates unlocked status. A broken spring is suspected as the cause. Documentation available. Inspection by appointment possible.

more

CNC Lathe

Oerlikon Boehringer VDF 400 C-U

Germany

1985

used

on request

INNO32358

Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026.

more

Center Lathe

Heidenreich & Harbeck M 530

Germany

1967

used

on request

INNO32341

Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. three-jaw and four-jaw chuck diameter according to DIN 6350: 315mm, weight: 3t, with work light, coolant system with chip tray, four-way tool post with face serration for one-hand operation on the compound slide, operating manual and fixed steady rest. An on-site inspection is possible.

more

Lathe

Knuth DL 3000

Germany

unknown

used

on request

INNO32339

Max. swing over bed: 615mm, max. swing over cross slide: 345mm, distance between centers: 3000mm, spindle bore: 70mm, spindle taper: MT5, forward speed steps: 18, forward speed range: 14-750rpm, reverse speed steps: 9, reverse speed range: 21-857rpm, standard longitudinal feed: 32 steps, 0.1-1.42mm/rev, standard cross feed: 32 steps, 0.03-0.46mm/rev, fine longitudinal feed: 8 steps, 0.048-0.089mm/rev, fine cross feed: 8 steps, 0.015-0.028mm/rev, coarse longitudinal feed: 32 steps, 1.52-2.28mm/rev, coarse cross feed: 32 steps, 0.48-7.2mm/rev, rapid traverse longitudinal: 6m/min, rapid traverse cross: 2m/min, metric threads: 54, range: 1-240mm, Whitworth threads: 37, range: 1-28threads/inch, compound slide travel: 230mm, cross slide travel: 400mm, distance from spindle center to tool holder: 32mm, tool dimensions: 30x30mm, tailstock quill diameter: 100mm, tailstock taper: MT5, quill travel: 205mm, bed width: 490mm, main motor power: 11kW at 1450rpm, rapid traverse motor power: 0.12kW at 1450rpm, coolant motor power: 0.09kW, coolant delivery rate: 25l/min, length: 5500mm, width: 1500mm, height: 1300mm, weight: 4.7t, with documentation. An on-site inspection is possible.

more

CNC Lathe

Boehringer VDF 315C

Germany

1991

used

on request

INNO32333

Offered for sale is a robust universal CNC lathe. Turning length: 3000mm, max. torque: 2240Nm, spindle speed range: 16-2500rpm, feed rate: 0.001-9999.999mm/min, rapid traverse rate: 10000mm/min, feed force: 15kN, tailstock quill force: max. 15kN, control: FANUC 15 TF. Equipped with hydraulic tailstock, drum turret, steady rest (range 72-220mm and 28-120mm), various spare parts, defects: machine bed worn, X-axis bearing arrangement makes noise. Weight: approx. 8500kg, overall dimensions X/Y/Z: approx. 6500mm/2200mm/2000mm. Inspection possible by appointment.

more

Lathe

Knuth Sinus 400/3000 D

Germany

2023

used

on request

INNO32283

Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible.

more

CNC Cycle Lathe

Wemas HiTurn 550x1500

Germany

2008

used

on request

INNO32273

Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible.

more

Center Lathe

Gdw LZ 400 VS1 comfortline

Germany

2019

used

on request

INNO32258

Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.

more

CNC Cycle Lathe

Pinacho Smart Turn 6/225

Germany

2008

used

on request

INNO32238

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

more

CNC Lathe

Index ABC 65

Germany

2004

used

on request

INNO32217

An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.

more

CNC Lathe

Traub TNL 26

Germany

2003

used

on request

INNO32207

Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.

more

CNC Lathe

Traub TNC 42-65

Germany

2006

used

on request

INNO32206

Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.

more

Center Lathe

Wmw DLZ 800/VL x3000

Germany

unknown

used

on request

INNO32181

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

more

Roller-Type Swiss-Type Lathe

Wmw DLZ 1000 III 5000

Germany

unknown

used

on request

INNO32179

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

more

Vertical Lathe

Hessapp VDM1200

Germany

2002

used

on request

INNO32173

Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment.

more

CNC Lathe

Buffalo Machinery Microturn Challenger BNC 1640 S

Germany

2007

used

on request

INNO32165

A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible.

more

All Offers / Metal processing machines / Lathes