▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Lathes [1 - 20 of 199]

CNC Turning Center

Spinner TC600 52 SMCY

Germany

2008

used

on request

INNO32698

Offered is a CNC turning center with automated robot loading. Workpiece feeding: Ball blanks under 120mm via rod chute, larger ball blanks via a separate singulation system at the CNC machine. Operating hours: approx. 68000h. Control system: FANUC 31i-A. Robot controller: FANUC R-30iA. Equipped with: Main spindle and counter spindle, tool turret, FANUC M-16iB 6-axis industrial robot, automated workpiece feeding, raw part hopper, rod chute for ball blanks under 120mm, separate workpiece singulation system for larger ball blanks, chip conveyor, protective enclosure for the robot cell as well as electrical documentation and circuit diagrams. Repairs carried out: 2025: New feed screw with bearing, 2021: New vacuum pump on the cooling unit, 2018: New CPU for the FANUC robot. Inspection possible by arrangement.

CNC Lathe

Gildemeister CTX 400E

Germany

1997

used

on request

INNO32689

X-axis travel: 220mm, Z-axis travel: 635mm, swing diameter over bedway cover: 570mm, swing diameter over cross-slide cover: 420mm, main spindle nose diameter: 170mm h5, main spindle diameter at front bearing: 120mm, main spindle bore: 79mm, drive power at 100% duty cycle: 21kW, max. torque: 240Nm, spindle speed range: 25-5,000rpm, C-axis speed: 100rpm, holding torque: 200Nm, counter spindle nose diameter: 120mm h5, counter spindle diameter at front bearing: 90mm, spindle bore: 56mm, chuck diameter: 140mm, drive power at 100% duty cycle: 9kW, max. torque: 72Nm, spindle speed range: 25-5,000rpm, travel: 575mm, rapid traverse speed: 24m/min, Z-axis feed force: 7kN, X-axis feed force: 3.5kN, X-axis rapid traverse speed: 20m/min, Z-axis rapid traverse speed: 24m/min, X/Z ball screw dimensions: 32x10mm, length: 3565mm, width: 1700mm, height: 1700mm, weight: 4.7t, operating hours: 79,630h, the machine is currently not operational due to damage to the tool turret, an on-site inspection is possible.

Universal Lathe

Maschstroj C11MB

Germany

1980

used

on request

INNO32654

Equipment: tailstock with handwheel, compound slide, cross slide, longitudinal carriage with apron, machine light, integrated machine stand, tool holder. Inspection possible by appointment.

Center Lathe

Krasny Proletarij 16K20

Germany

1977

used

on request

INNO32646

Offered is a conventional center lathe with lead screw and feed rod. Thread cutting: metric and imperial threads. Speed and feed selection: mechanically via gearbox. Workpiece clamping: three-jaw chuck. Tool holder: four-way tool post. Equipped with longitudinal and cross slides, tailstock with quill, lead screw and feed rod, digital position readout and work light. Inspection possible by arrangement.

Headstock Lathe

Veb Werkzeugmaschinenfabrik 7. Oktober DP 2/S 3

Germany

unknown

used

on request

INNO32644

Offered is a facing lathe with a large faceplate. Swing diameter over foundation plates: 2480mm. Center height above foundation plates: 1250mm. Faceplate diameter: 1600mm. Maximum faceplate torque: 14000Nm. Main spindle bore: 100mm. Front main spindle bearing diameter: 240mm. Turning tool shank cross-section: 50 × 50mm. Equipped with four chuck jaws, movable bed-mounted carriage, cross slide, tool holder, mechanical control levers and handwheels.

Vertical Turret Lathe

Sedin 1516

Germany

unknown

used

on request

INNO32643

Offered is a single-column vertical turret lathe with tool turret. Equipped with a large rotary table with radial clamping slots, clamping brackets, vertical tool slide with turret head, digital position readout, work light and separate control panel. Inspection possible by arrangement.

Center Lathe

Tos Celákovice SU-63A

Germany

unknown

used

on request

INNO32642

Offered is a conventional shaft lathe with tailstock. Swing over bed: 630mm. Swing over cross slide: 360mm. Center height above bed: 286mm. Spindle bore: 60mm. Spindle diameter at front bearing: 140mm. Number of spindle speeds: 30. Number of longitudinal feed steps: 41. Number of cross feed steps: 41. Longitudinal feed: 0.064-6mm/rev. Cross feed: 0.025-2.32mm/rev. Maximum workpiece weight according to manufacturer: 6000kg. Metric thread pitches: 0.219-48mm. Equipped with a large chuck, tailstock, four-way tool post, longitudinal and cross slides, as well as mechanical control levers and handwheels. Inspection possible by arrangement.

Surface Lathe

Maschinenfabrik Ravensburg Ag P 30

Germany

unknown

used

on request

INNO32639

Offered 250mm. Feed steps: 12. Cross-bed feed: 0.05-3mm/rev. Carriage and rotating section feed: 0.04-2.5mm/rev. Feed motor speed: 1000rpm. Feed motor power: 2.2kW. Permissible workpiece weight, cantilevered with a center of gravity distance of 300mm: approx. 5000kg. Permissible workpiece weight between centers, without additional support: 20000kg. Equipped with a large faceplate with clamping devices, cross-bed support, movable tool slide and mechanical lever controls. Inspection possible by arrangement.

Center Lathe

Saro SNA 710 × 3000

Germany

1982

used

on request

INNO32629

Offered for sale is a conventional center lathe with lead screw and feed rod. Distance between centers: 3000mm. Swing over bed: 710mm. Center height: 342mm. Spindle speed range: 8-1250rpm. Number of spindle speed steps: 23. Longitudinal feed: 0.056-10mm/rev. Cross feed: 0.028-5mm/rev. Metric thread pitches: 1-176mm. Max. workpiece weight between centers: 2500kg. Max. workpiece weight between centers with steady rest: 3000kg. Tailstock quill travel: 300mm. Equipped with digital readout, three-jaw chuck, four-way tool post and tailstock. Weight: approx. 5400kg. Overall dimensions X/Y/Z: approx. 5325mm/1510mm/1510mm. Inspection possible by arrangement.

Center Lathe

Ponar-wrocław TUR 630 M

Germany

1986

used

on request

INNO32627

Offered for sale: Conventional center lathe with lead screw and feed rod. Distance between centers: 1500mm. Swing over bed: 630mm. Spindle speed range: 18-1800rpm. Number of spindle speeds: 21. Spindle bore: 90mm. Bed width: 433mm. Longitudinal feed: 0.08-3.26mm/rev. Cross feed: 0.04-1.63mm/rev. Equipped with digital readout, lathe chuck, four-way tool post and tailstock. Weight: approx. 3300kg. Overall dimensions X/Y/Z: approx. 3400mm/1420mm/1645mm. Inspection possible by arrangement.

Cam-controlled automatic lathe

Traub TB 60

Germany

1968

used

on request

INNO32598

Offered is a cam-controlled automatic lathe with bar feeder. Main spindle bore: Ø 60mm. Spindle speed: 160-1600rpm. Speed steps: 11. Distance between centers: 340mm. Center height: 125mm. Equipped with mechanical collet and bar feeder. Inspection possible by appointment.

Center Lathe

Fritz Kern Kg D560

Germany

unknown

used

on request

INNO32583

Swing diameter over bed: 560mm, swing diameter over cross slide: 320mm, spindle speed: 900rpm, machine has surface rust, not operational, an on-site inspection is possible, not connected to power.

Lathe

Colchester Chipmaster

Germany

unknown

used

on request

INNO32581

Including accessories. Inspection possible by prior arrangement.

CNC Lathe

Index-werke ABC

Germany

2005

used

on request

INNO32551

Main spindle bore: 42mm, rated voltage: 400V AC, rated current: 45A, connected load: 26kW, control: Siemens SINUMERIK 840D/PCU50, length: 3400mm, width: 1400mm, height: 1750mm, weight: 2.5t, operating hours: >100,000h, spindle hours: 48,348h, with FMB Turbo 5-42 bar feeder, documentation and service reports, regularly maintained, an on-site inspection is possible, available from March 2027.

Universal CNC Turning Center

Emco MAXXTURN 65

Germany

2007

used

on request

INNO32550

X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible.

CNC Lathe

Spinner TC 800 110 MC

Germany

2009

used

on request

INNO32523

X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible.

CNC Lathe

Spinner TC32-MC

Germany

1997

used

on request

INNO32467

A compact CNC lathe is offered. Control: Siemens. Condition: defective. Turret enable signal is missing. Inspection possible by appointment.

CNC Lathe

Index G200 Compact

Germany

1998

used

on request

INNO32466

A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment.

CNC Lathe

Dmt-drehtechnik Kern CD480

Germany

2000

used

on request

INNO32458

A lathe with CNC control is offered. Equipped with three-jaw chuck, tailstock, tool holder, cutting fluid supply and machine enclosure. Control: HEIDENHAIN. Inspection possible by prior arrangement.

CNC Lathe

Traub TND 360

Germany

1984

used

on request

INNO32454

A CNC lathe is offered. Equipped with three-jaw chuck, tool turret and hydraulic unit. Control: TRAUB SYSTEM TX 8. Inspection possible by prior arrangement.