Innovac GmbH Used machines from Germany
Innovac used-machines Wire industry machinery [1 - 20 of 27]
Cutting-and-Stripping-Machine-Reger-Omnistrip-9400 used
Cutting and Stripping Machine
Reger Omnistrip 9400
Germany
2002
used
on request
INNO26517
Cable length: 45-1000mm, number of pieces: 1-999,999, stripping length: 0.1-120mm right and 0.1-45mm left, stripping length: 999.9mm on both sides, feed speed: 0.14-1.68m/s, cable cross-sections: AWG 32-8/ 0.06-10mm², solid wire up to 2.5mm², max. cable diameter: 11mm, length: 560mm, width: 500mm, height: 350mm, weight: 45kg, including V-blades, radius blades in various sizes and transport rollers, an on-site inspection is possible.
Punching-and-Bending-Machine-Weber used
Punching and Bending Machine
Weber
Germany
unknown
used
on request
INNO26514
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.
Wire-Cutting-Machine-Schäfer-CS-326 used
Wire Cutting Machine
Schäfer CS-326
Germany
2004
used
on request
INNO26448
With documentation, without accessories, an on-site inspection is possible.
Automatic-Frame-Bending-Machine-Evg-Graz-POLYBEND-LS used
Automatic Frame Bending Machine
Evg Graz POLYBEND LS
Germany
1993
used
on request
INNO26307
Single/ dual wire diameter: 6-16/ 6-12mm, max. bending speed: 1200°/s, connected load: 22kW, length: 4100mm, width: 1300mm, height: 1650mm, weight: 4.75t, with documentation.
Double-Printing-Press-Somavis-T-8K-T-8L used
Double Printing Press
Somavis T-8K / T-8L
Germany
1983
used
on request
INNO15816
There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min.
Reel-Bihler-MH-2 used
Reel
Bihler MH-2
Germany
1989
used
on request
INNO26067
Two Bihler reels are available, without documentation, an inspection is possible.
Fine-Wire-Multi-Drawing-Machine-W.-Breitenbach-Standard-4-III-8-7Z used
Fine Wire Multi-Drawing Machine
W. Breitenbach Standard 4-III/8 (7Z)
Germany
1968
used
on request
INNO25983
Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but set up for torsion free multiple drawing with twin pulleys, with documentation and spare pulleys, has been regularly maintained.
Spiralising-Machine-Spirka-DW-12A used
Spiralising Machine
Spirka DW 12A
Germany
1998
used
on request
INNO25854
Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled.
Resistance-Annealing-Machine-Tecno-Induction used
Resistance Annealing Machine
Tecno Induction
Germany
2016
used
on request
INNO25790
Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.
Winding-Machine-Schmidt-SD20-30-7 used
Winding Machine
Schmidt SD20-30/7
Germany
1993
used
on request
INNO25776
Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.
Spring-Winding-Machine-Emil-Schenker-Ag-FA-6S used
Spring Winding Machine
Emil Schenker Ag FA-6S
Germany
1971
used
on request
INNO25336
With Measuring, Control and Sorting Machine Schenker MR 20 and Wire Reel SR 50.
Tension-Spring-Machine-Wafios-Maschinenfabrik-FOA-2 used
Tension Spring Machine
Wafios Maschinenfabrik FOA 2
Germany
unknown
used
on request
INNO24694
Outer spring diameter: 5-16mm, wire thickness: 0.5-1.3mm, angle ratio: 6-18, max. throughput: 65/min, with documentation.
Wire-Bending-Machine-Ghislanzoni-Umberto-PU4-SP used
Wire Bending Machine
Ghislanzoni Umberto PU4 SP
Germany
1981
used
on request
INNO22627
Including documentation.
Rewinder-Rudolph-and-Koschinski used
Rewinder
Rudolph & Koschinski
Germany
unknown
used
on request
INNO24361
The machine is a rewinding machine for producing cables, with radial force measuring axes Honigmann, including documentation.
Straightening-and-Cutting-Machine-Wafios-R31 used
Straightening and Cutting Machine
Wafios R31
Germany
1997
used
on request
INNO24128
Wire range: 3-6mm, speed: 60-80/min, max. coil weight: 1t.
Flat-Cable-and-Tubing-Cutter-Eubanks-4600 used
Flat Cable and Tubing Cutter
Eubanks 4600
Germany
unknown
used
on request
INNO23484
Max. cable/ tubing diameter: 76.2/ 9,5mm, diameter: 23,200/h.
Double-Head-Wire-Bending-Machine-Amda used
Double Head Wire Bending Machine
Amda
Germany
2013
used
on request
INNO22234
Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used.
Cable Center
Metzner Triathlon 3000
Germany
2006
used
on request
INNO22197
Max. outer cable diameter: 4mm, strand and cable length: 250-999mm, length: 1750mm, width: 1100mm, height: 1520mm, weight: 250kg.
Rewinding-Machine-Rosendahl-RA-7061 used
Rewinding Machine
Rosendahl RA 7061
Germany
1987
used
on request
INNO21279
Max. coil weight: 10t, controls: SIEMENS S5, without documentation.
Wire-Drawing-Machine-Lukas-DCI-11-50-360 used
Wire Drawing Machine
Lukas DCI 11/ 50-360
Germany
2002
used
on request
INNO21074
Max. speed: 360m/min, power: 5.6kW.