▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Other machinery [1 - 20 of 44]

FDM/FFF 3D Printer

Evo-tech EL-102

Germany

unknown

used

on request

INNO32541

Equipped with two independent extruders, build volume: 260x350x340mm, standard nozzle: 0.4mm, interchangeable, additional sizes optional, layer thickness: 0.05-0.6mm, software compatibility: Simplify3D, Cura, Slic3r, file formats: STL, OBJ, G-code, print bed: heated glass/metal platform, temperatures: extruder up to 260°C/heated bed up to 120°C, power supply: 230V, 50/60Hz, length: 840mm, width: 750mm, height: 1,020mm, weight: approx. 400kg, total operating time: 131 days, 17h, 25min, 7s, longest print job: 2 days, 14h, 6min, 35s, filament consumption: 19,912.05m. On-site inspection is possible.

3D Laser-Sintering System

Eos Gmbh EOSINT M 280

Germany

2011

used

on request

INNO32540

Build volume including build platform: 250x250x325mm, laser type: Yb fiber laser (ytterbium), 1x 200W, 1x 400W, manufacturing process: metal powder bed fusion (DMLS/SLM), precision optics: F-theta lens, high-speed scanner, max. scanning speed: 7m/s, variable focal spot diameter: 100-500µm, power supply: 32A, connected load: 8.5kW, nitrogen generator: integrated, compressed air supply pressure: 7,000hPa, volume flow rate: 20m³/h, argon supply pressure: 4,000hPa, volume flow rate: 100l/min, length: 2,200mm, width: 1,070mm, height: 2,290mm, min. recommended installation space: 4,800x3,600x2,900mm, weight: 1.325t, operational hours counter: 1138h, both lasers must be configured or initialized before operation. On-site inspection is possible.

Bar Loader Magazine

Lns SUPER HYDROBAR 6.60 H5-4.4

Germany

2001

used

on request

INNO32427

Number of guide tubes: 3, mains connection: 380V, 3-phase, frequency: 50Hz, control voltage: 24VDC, rated current / FLA: 5A, an on-site inspection is possible, not connected to power.

Tool Presetting and Measuring Device

Gildemeister De Vlieg

Germany

unknown

used

on request

INNO32424

Display: microset DPS, an on-site inspection is possible, without power.

Bar Loader Magazine

Top Automazioni XFS380SX

Germany

2020

used

on request

INNO32335

Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

Workshop Equipment

Sigg/rema/weiler TR 60/DP 07

Germany

1997

used

on request

INNO32295

Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible.

Plate Turner

Globus Hebetechnik PW2000-003

Germany

2021

used

on request

INNO32214

Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement.

Bar Loader Magazine

Iemca VIP 70/1 CNC

Germany

1999

used

on request

INNO32102

Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible.

Remaining Stock

Veb/fritz Werner/infratirea/tianjin No. 4 BS 16/4GC02502/Z3063×20

Germany

1987

used

on request

INNO32071

5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20.

Remaining Stock

Cloos/hebö/eisele GLC 353 MC3/GLC 255/Stabverdriller Typ II/VMS II PV-p

Germany

2007

used

on request

INNO32063

Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible.

Metal Forming Machine

R.a. Tec TP250

Germany

2008

used

on request

INNO32009

An R.A. TEX s.r.l. forming machine for the production of staples is available. Strip thickness range: 0.8mm-2mm, strip width range: 80mm-130mm, cutting capacity range: 26mm-140mm, production rate: 250/min, leg length range: 15mm-63mm. The machine can produce the following staple types: Duplex 76, Haubold 500, Super Duplex/KG700, SP90, N4450, Blue, Red, Red special size, G5562, G4450, BEA92, GSN18, GS16, GSW16 and SQ. Machine dimensions X/Y: approx. 6800mm/2500mm, weight: approx. 7600kg. Documentation available. An on-site inspection is possible.

Bar Loader

Kft Radid Load 15

Germany

2001

used

on request

INNO31864

A KFT bar feeder is offered. Bar diameter: approx. 15mm, Bar length range: approx. 150mm/1215mm, Magazine width: approx. 600mm, Material change time: approx. 18-25s, Alignment accuracy: +/-0.5mm. Machine dimensions: approx. 3000mm/750mm/1500mm, Weight: approx. 250kg. Inspection possible by appointment.

Fine Filtration System

Vomat FA120 EKS

Germany

2019

used

on request

INNO31762

A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process and a cooling unit is available. Filtration capacity: 240l/min, Filtration fineness: 3µm-5µm, Filling capacity: 500l, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Bar Loader Magazine

Iemca PRA 52/42/F

Germany

2007

used

on request

INNO31725

An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026.

Bar Loader Magazine

Iemca/irco Vip 80-E/REX 7208

Germany

2008

used

on request

INNO31707

A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible.

Washing Machine

Mea LT 650

Germany

1999

used

on request

INNO31509

Offered is a continuous parts cleaning system for metal parts. Control system: conventional. Equipped with conveyor belt, integrated filter and pump units, control cabinet, steam damage extraction blower. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 4500mm/1600mm/2100mm. Inspection possible by arrangement.

Drilling and Insertion Machine

Priess & Horstmann BAT-III-CNC

Germany

1997

used

on request

INNO31506

Offered is an automatic fitting drilling machine. Workpiece size L: 100-1350mm, W: 100-600mm, d: 16-25mm, operating pressure: 6-7bar, extraction air speed: 30m/s, extraction volume flow: 70m³/min, working height: 1000mm, traverse speed X-axis: 60m/min, traverse speed Y-axis: 50m/min, control system: Ferrocontrol CNC. Equipped with vibratory feeder for hinges, spiral vibratory feeder for buffers, drilling and insertion units, light barrier monitoring. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 5500mm/2200mm/2400mm. Inspection possible by arrangement.

Drilling and Insertion Machine

Priess & Horstmann BAT-III-CNC

Germany

1999

used

on request

INNO31505

Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement.

Remaining Stock

Colchester/steinel Chipmaster 5x20/BGS 140

Germany

unknown

used

on request

INNO31245

Various old small machines are available. 1) Lathe Colchester Chipmaster 5x20. 2) Multi-spindle drilling machine Steinel BGS 140. 3) Orbital riveting machine Steinel VS. 4) Hydraulic power unit Sauter HA1202. 5) Laminating machine Sallmetall. 6) Drum pump Flux F 407. 7) Hydraulic power unit Sauter HOV4. An on-site inspection is possible. A package sale is desired.

Bar Loader Magazine

Fmb turbo 10-65-XT

Germany

unknown

used

on request

INNO31225

Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible.