Innovac GmbH Used machines from Germany
Innovac used-machines Welding and cutting [1 - 20 of 107]
Laser-Cutting-Machine-Trumpf-TruLaser-5040-L18 used
Laser Cutting Machine
Trumpf TruLaser 5040 (L18)
Germany
2012
used
on request
INNO32793
Offered is a laser cutting machine with a CO₂ laser. Laser power: 6000W, working area X/Y: 4000mm/2000mm, wavelength: 10.6µm, cutting head focal length: 250mm, control: Siemens Sinumerik 840D, PalletMaster TASC terminal, automatic pallet changer, connected PalletMaster with 20 storage compartments and storage and retrieval unit, cooling unit, CoolLine cooling function with separate lens cutting head, longitudinal conveyor, wide transverse conveyor with tipping container, multi-chamber extraction system, compact dust extractor, cutting head equipment with LensLine condition check, UTI quick-change device as well as ControlLine height control and sheet outer edge detection. Inspection possible by arrangement.
CNC-Flame-Cutting-Machine-Esab-Cutting-Systems-SUPRAREX-SXE-P3-5500 used
CNC Flame Cutting Machine
Esab Cutting Systems SUPRAREX SXE-P3 5500
Germany
2010
used
on request
INNO32791
Offered is a CNC oxy-fuel cutting system with gantry design. Track width: 5500mm, maximum travel speed: 24000mm/min, fuel gas: propane, control: ESAB VISION T5, renewed in 2022, two A5/200 oxy-fuel tool carriages, COOL-JET BIE 220 cutting torches, automatic height control, manual torch angle adjustment, travelling operator console, laser-based plate position detection, torch carriage extraction hood, transverse extraction duct, extraction fan, emergency-stop pull wires at the front and rear. Inspection possible by arrangement.
CNC-Plasma-Cutter-Erl-Automation-erlcut-e545 used
CNC Plasma Cutter
Erl Automation erlcut e545
Germany
unknown
used
on request
INNO32790
Offered is a CNC plasma cutting system with gantry design. Cutting area X/Y: 2000mm/4000mm, mild steel material thickness according to the summary: 1-40mm, cutting speed: up to 15000mm/min, travel speed X/Y: up to 25000mm/min, track width: 4500mm, runway length: 6000mm, cutting table height: 1000mm, height adjustment travel: 220mm, control: ERL e*volution, additional Siemens-SIMATIC HMI operator panel available, one plasma torch, Kjellberg HiFocus 440i neo plasma power source, Kjellberg KWE 360 cooling unit, PHV 220 automatic torch height control, magnetic collision protection, automatic gas console, extraction table with shuttle table system, belt conveyor and cross conveyor, sound-insulated cabin with supply air ventilation, camera for setup mode, converter for TOPS nesting software, associated extraction system: Dodek DTZ 9, year of manufacture 2016, volumetric flow rate: 5400m³/h, filter area: 189m², associated fan: Dodek GR 560/2, year of manufacture 2016, power: 15kW, volumetric flow rate range: 4680-12600m³/h. Inspection possible by arrangement.
Welding-Robot-Cell-Demmler-COBOT-WeldSpace-4.0 used
Welding Robot Cell
Demmler COBOT WeldSpace 4.0
Germany
2021
used
on request
INNO32747
An automated cobot welding cell is offered for sale. SPACE A: Workspace X/Y/Z: 2300mm/875mm/1300mm. Maximum load: 3000kg. SPACE A1/A2: Workspaces X/Y/Z: 1050mm/875mm/1100mm. Maximum load: 1500kg. SPACE B: Workspace X/Y/Z: 2300mm/1200mm/2150mm. Maximum manipulator payload: 500kg. Manipulator torque: 1000Nm. Equipped with an extension set, a two-axis manipulator, a Fronius TPS/i 400A welding system prepared for CMT and a torch cleaning station. Inspection possible by arrangement.
Welding-Robot-Cell-Trumpf-TruArc-Weld-1000 used
Welding Robot Cell
Trumpf TruArc Weld 1000
Germany
2021
used
on request
INNO32746
An automated robotic welding cell including a Fronius TPS 320i welding power source, robot arm, welding table and protective enclosure is offered for sale. Inspection possible by arrangement.
CNC-Laser-Cutting-Machine-Trumpf-TruLaser-3030 used
CNC Laser Cutting Machine
Trumpf TruLaser 3030
Germany
2008
used
on request
INNO32737
Laser power: 4000W, power supply: 400V/50Hz, control voltage: 24V DC, required fuse rating: 3x160A, compressed air connection: 7-10bar, nitrogen connection (N₂): 30bar, oxygen connection (O₂): 20bar, connected load: 88kVA, operating hours: approx. 46,000h. An on-site inspection is possible.
CNC-Plasma-Cutting-Machine-Microstep-MasterCut-Compact-P-6001.20 used
CNC Plasma Cutting Machine
Microstep MasterCut Compact P 6001.20
Germany
2013
used
on request
INNO32712
Working area: 6000x2000mm, max. material thickness: 100mm, max. positioning speed: 35,000mm/min, machine height: approx. 1518mm, operating hours: 24,472h. Equipment: Kjellberg HiFocus 161i plasma power source, axis control: digital, maintenance-free DC servos with IRC, linear guides in X and Y directions, helical gearing on all axes, gantry-type CNC cutting machine, complete guide unit with accessories and cable drag chains, dual-side driven gantry bridge, sharp angles and corners, high contour accuracy, sectional under-table extraction system, gas control: automatic gas console, cutting technology: Contour Cut Speed, measuring system: IRC 2500 (incremental encoder). An on-site inspection is possible.
MIG-MAG-Welding-Machine-Cloos-Qineo-Tronic-450 used
MIG/MAG Welding Machine
Cloos Qineo Tronic 450
Germany
2017
used
on request
INNO32649
6x Cloos Qineo Tronic 450 MIG/MAG welding machines, 1x Cloos GLC 451-C welding machine and 1x Cloos GLC 553/MC3 welding machine are available, 1) 6x Cloos Qineo Tronic 450 MIG/MAG welding machines, welding current: 40-450A, welding current at 60% duty cycle: 450A/36.5V, welding current at 100% duty cycle: 350A/31.5V, open-circuit voltage: 77-98V, mains voltage: 380-480V/50Hz/3-phase, power cable: 4x6mm², mains fuse protection: 400V/32A, protection rating: IP23, insulation class: F, cooling method: F, dimensions (without wire feeder): 1011x517x703mm, weight (without wire feeder): 88kg, year of manufacture: 5x2017, 1x2016, 2) 1x Cloos GLC 451-C welding machine, year of manufacture: 2003, 3) 1x Cloos GLC 553/MC3 welding machine, year of manufacture: 2008, additionally, 21 welding torches with long torch necks, 12x500mm, 4x600mm, 5x1500mm, and 53 FKS400 Autogen Ritter welding torch hose assemblies are included, an on-site inspection is possible.
CNC-Plasma-Cutter-Saf-OXYTOME-40 used
CNC Plasma Cutter
Saf OXYTOME 40
Germany
unknown
used
on request
INNO32631
Offered for sale is a CNC cutting system for plasma and oxy-fuel cutting. Cutting area X/Y: 3100mm/16100mm. Cutting table overall dimensions X/Y: 3305mm/16220mm. Cutting height: 720mm. Number of extraction sections: 32. Extraction sections X/Y: 30mm/500mm and 2mm/550mm. Cutting support X/Y: Flat steel bars 80mm/5mm. Spacing between cutting supports: 75mm. Control system: Lincoln Electric BURNY 10 LCD PLUS CNC controller. Equipped with: 2 oxy-fuel torches, SAF NERTAJET 120 plasma cutting system, BEUTING cutting table type BT500-1IAK, sectional table fume extraction system, Donaldson TORIT DCE DFPRO 8-IP dust collector, 8 oval Ultra-Web FR filter cartridges, dust collection container with 50l capacity and radial fan with 11kW power. Extraction airflow: 6800m³/h at 3400Pa. Inspection possible by arrangement.
CNC-Laser-Cutting-Machine-Trumpf-TRUMATIC-L-4050 used
CNC Laser Cutting Machine
Trumpf TRUMATIC L 4050
Germany
2006
used
on request
INNO32548
A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement.
Filter-Suction-and-Supply-Unit-Kist-and-Escherich-ESUC-1300 used
Filter, Suction and Supply Unit
Kist & Escherich ESUC 1300
Germany
2024
used
on request
INNO32525
Max. volume flow rate: 1,260m³/h, possible number of filter stages: 1, 2, operating voltage: 3x 400V, PE, N, frequency: 50Hz, rated power: 1.8-2.9kVA, max. rated current: 2.7-6.6A, upstream fuse: 16A, mains connection three-phase AC: 400V, max. rated power: 2.9kVA, max. rated current: 6.6A, upstream fuse: 16A, control cabinet protection rating: IP54, max. differential pressure: 2,380Pa, compressed air quality: factory-supplied, oil-free, dry, max. inlet operating air pressure: 8bar, operating temperature: 5-40°C, weight: 165kg. On-site inspection is possible.
Welding-Robot-Abb-Automation-IRB-1600-M2004 used
Welding Robot
Abb Automation IRB 1600 M2004
Germany
2006
used
on request
INNO32331
An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement.
Welding-Fume-Extraction-Kemper-System-9000 used
Welding Fume Extraction
Kemper System 9000
Germany
2015
used
on request
INNO32329
A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement.
Welding-Rotator-Aandn-Europe-Romar-PR30-45 used
Welding Rotator
A&n Europe / Romar PR30-45
Germany
unknown
used
on request
INNO32291
Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.
CNC-Stud-Welding-Machine-Hbs-MPW-2010 used
CNC Stud Welding Machine
Hbs MPW 2010
Germany
unknown
used
on request
INNO32289
Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.
Submerged-Arc-Welding-Column-and-Boom-Oerlikon-MFT-42-×-42-So used
Submerged Arc Welding Column and Boom
Oerlikon MFT 42 × 42 So
Germany
2007
used
on request
INNO32284
Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible.
CNC-Laser-Cutting-Machine-Bystronic-ByStar-4025 used
CNC Laser Cutting Machine
Bystronic ByStar 4025
Germany
1999
used
on request
INNO32272
Laser source: Bystronic BLT 3500 Turbo, laser power: 3500W, wavelength: 10600nm, max. sheet weight: 160kg/m². Base machine weight: approx. 7000kg, laser source weight: approx. 1600kg. Documentation available. An on-site inspection is possible.
Horizontal-cage-welding-machine-Mbk-M.B.K-414 used
Horizontal cage welding machine
Mbk M.B.K 414
Germany
unknown
used
on request
INNO32205
An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.
CNC-Plasma-Cutting-Machine-Saf-Plasmatome-20 used
CNC Plasma Cutting Machine
Saf Plasmatome 20
Germany
1999
used
on request
INNO32197
Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement.
WIG-Welding-Rectifier-Kjellberg-KTF-402T used
WIG Welding Rectifier
Kjellberg KTF 402T
Germany
unknown
used
on request
INNO32171
Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible.