Innovac GmbH Used machines from Germany
Innovac used-machines Presses [1 - 20 of 100]
Knuckle-Joint-Press-Gechter-50-kN-HKP-ZS-06 used
Knuckle-Joint Press
Gechter 50 kN HKP ZS 06
Germany
2012
used
on request
INNO32852
Offered is a pneumatic toggle press with force-displacement monitoring via a Kistler maXYmos (Type 5867). Last service: September 2026. Inspection possible by arrangement.
Double-Column-Eccentric-Press-Fagor-Helmerding-SCM2-500-2400-1700 used
Double-Column Eccentric Press
Fagor Helmerding SCM2-500-2400-1700
Germany
1988
used
on request
INNO32807
Max. pressing force: 5000kN, rated force point before BDC: 8.8mm, stroke: 25-200mm, table dimensions: 2400x1700mm, ram base dimensions: 2400x1500mm, shut height at upper adjustment position: 1100mm, ram adjustment: 200mm, stroke rate: 20-100 strokes/min, flywheel energy: 160,000J, operating air pressure: 5.5bar, ram adjustment motor power: 2.2kW, main motor power: 84kW, weight: approx. 82.5t, including combined roller feeder and straightener and decoiler. On-site inspection is possible.
Straightening-Press-Eitel used
Straightening Press
Eitel
Germany
unknown
used
on request
INNO32757
Offered is a straightening press with hand lever operation. Vertical straightening ram, support table, affixed operating instructions for straightening workpieces based on runout measurement and for adjusting the straightening stroke. Inspection possible by arrangement.
Hydraulic-Press-Brake-Trumpf-TrumaBend-V500 used
Hydraulic Press Brake
Trumpf TrumaBend V500
Germany
unknown
used
on request
INNO32690
Offered is a hydraulic press brake with 500kN pressing force. Stroke: max. 215mm. Operating pressure: max. 320bar. Stopping time: max. 95ms. Equipped with Lazer Safe laser guarding system. Inspection possible by arrangement.
Hydraulic-Press-Brake-Adira-QHR-3220-CB used
Hydraulic Press Brake
Adira QHR-3220 CB
Germany
1995
used
on request
INNO32662
A hydraulic press brake with a working length of 2000mm is offered for sale. Pressing force: 320kN. Max. working length: 2000mm. Max. hydraulic pressure: 295bar. Stroke: 26-102mm. Approach speed: 102mm/s. Working speed: 8.5mm/s. Max. tool dimension: 2050mm. Control: control panel with selector switches and push buttons. Equipped with a two-hand control panel, side safety guards and tool holders. Weight: approx. 2400kg. Inspection possible by arrangement.
Two-Column-Hydraulic-Press-Hans-Schoen-UTE-B used
Two-Column Hydraulic Press
Hans Schoen UTE/B
Germany
1978
used
on request
INNO32611
Pressing force: 75/5kN, motor power: 11kW, an on-site inspection is possible.
Double-Column-Hydraulic-Press-Müller-ZEO-100-10.3.1 used
Double-Column Hydraulic Press
Müller ZEO 100-10.3.1
Germany
1987
used
on request
INNO32588
Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible.
Single-Column-Eccentric-Press-Weingarten-ARS-125 used
Single-Column Eccentric Press
Weingarten ARS 125
Germany
1974
used
on request
INNO32563
Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement.
Eccentric-Press-Knuth-KEX-20 used
Eccentric Press
Knuth KEX 20
Germany
unknown
used
on request
INNO32546
A mechanical eccentric press is offered. Mechanically operated press ram. Worktable with T-slots and a central through opening. Operating mode selector switch for single stroke and continuous stroke. Control panel with on/off pushbuttons. Emergency stop switch. Indicator light. Foot switch with protective cover. Side-mounted compressed air service unit. Protective guard in the press area. The machine features a heavy-duty press frame and a worktable for mounting dies. The press area is accessible via a hinged protective guard. Inspection possible by prior arrangement.
Single-Column-Eccentric-Press-Ebu-Eisenwerk-Hensel-SK-125-FR used
Single-Column Eccentric Press
Ebu Eisenwerk Hensel SK 125 FR
Germany
unknown
used
on request
INNO32539
Rated force: 125t, stroke adjustment: 20-140mm, ram adjustment: 80mm, stroke rate: 50/min, motor power: 10HP, drive: mechanical eccentric drive, machine is fully functional, maintenance, repairs and safety inspections have been carried out regularly, inspection logbooks and inspection reports are available for the period 2010-2025, extensive maintenance and repair work has been carried out in recent years, including work on the connecting rod and connecting rod bearing, eccentric bushing, bearing points, gear coupling, brake and clutch shoes, bearings, bushings, lubrication system, lubrication pump, parallel keys and other components. On-site inspection is possible.
Hydraulic-Single-Column-Press-Hymag-HE-6-TME-SO-6 used
Hydraulic Single-Column Press
Hymag HE 6 TME SO 6
Germany
2003
used
on request
INNO32533
Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible.
CNC-Press-Brake-Trumpf-TrumaBend-V130 used
CNC Press Brake
Trumpf TrumaBend V130
Germany
1991
used
on request
INNO32516
Offered for sale: Hydraulic CNC press brake with 5-axis backgauge. Bending length: 3060mm. Pressing force: 1300kN, max. stroke: 215mm, max. operating pressure: 340bar, usable installation height: 385mm. Inspection possible by arrangement.
Hydraulic-Edge-Banding-Press-Reis-TUS-60-OK-40 used
Hydraulic Edge-Banding Press
Reis TUS 60 OK 40
Germany
unknown
used
on request
INNO32492
Power supply: 380V, frequency: 50Hz, rated current: 25A, backup fuse: 35A, control voltage: 220V. Documentation available. Inspection possible by arrangement.
Joining-Machine-Tox-Pressotechnik-REJ-08.200.060.001.A.001 used
Joining Machine
Tox Pressotechnik REJ 08.200.060.001.A.001
Germany
2008
used
on request
INNO32491
Max. press force: 82kN, total stroke: 200mm, power stroke: 12mm, min./max. air pressure: 3bar/6bar, machine weight without tooling: 610kg. Inspection possible by arrangement.
Single-Column-Knuckle-Joint-Press-May-Pressenbau-MKN1-100-6 used
Single-Column Knuckle-Joint Press
May Pressenbau MKN1-100/6
Germany
unknown
used
on request
INNO32410
There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible.
CNC-Press-Brake-Steiner-AK-25-350 used
CNC Press Brake
Steiner AK 25/350
Germany
1987
used
on request
INNO32408
Control: Cybelec DNC 600S. Inspection by appointment possible.
Knuckle-Joint-Press-Gräbener-GK600 used
Knuckle-Joint Press
Gräbener GK600
Germany
1995
used
on request
INNO32302
Rated force: 6000kN, rated force travel: 1.7mm, rated energy: 10.2kJ, stroke: 100mm, stroke rate: 45/min, installation height: 360mm, tool holder adjustment: 50mm, clear width of press frame: 580mm, table width: 550mm, table depth: 620mm, tool holder width: 550mm, tool holder depth: 430mm, motor power: 15kW, length: 2435mm, width: 1500mm, height: 2750mm, weight: 13.5t, an on-site inspection is possible.
CNC-Press-Brake-Eclair-delmet-AP150 used
CNC Press Brake
Eclair/delmet AP150
Germany
1985
used
on request
INNO32298
Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible.
Eccentric-Press-Eth3 used
Eccentric Press
Eth3
Germany
unknown
used
on request
INNO32241
Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible.
CNC-Press-Brake-Bystronic-Beyeler-PR-250-x-3100 used
CNC Press Brake
Bystronic Beyeler PR 250 x 3100
Germany
2005
used
on request
INNO32192
Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement.