Used Metal processing machines from Germany

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Sheet metal working [1 - 20 of 83]

Guillotine Shear

Amada GPS 840

Germany

1992

used

on request

INNO27369

Cutting length: 4000mm, max. steel thickness: 8mm, max. stainless steel thickness: 6mm, max. aluminum thickness: 10mm, stroke: 190mm, motor power: 15kW, dimensions X/Y/Z: approx. 4600mm/2200mm/2200mm, control: Amada Promecam. An on-site inspection is possible.

Plate Shear

Hanseatic HS 5/2550

Germany

1991

used

on request

INNO27330

Working width: 2550mm, max. sheet thickness: 5mm, max. power: 7.5kW, dimensions X/Y/Z: approx. 2060mm/3180mm/1400mm, weight: approx. 4200kg. On-site inspection is possible. Available from January 2025

Plate Shear

Franz Kramer TM IA 2000/3,25

Germany

1970

used

on request

INNO27329

Working length: 2000mm, max. sheet thickness: 3.25mm, table width: 300mm, side stand projection: 100mm, table/knife bar stop adjustment: 1000mm/550mm, drive power: 5.5kW. Dimensions X/Y/Z: approx. 2300mm/800mm/1500mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible. Available from January 2025.

Riveting Machine

Weber NAE 81

Germany

unknown

used

on request

INNO27226

A Weber wobble riveting machine is available. Compression force: 20KN, table dimensions X/Y: 400mm/400mm, throat depth: 200mm, stroke: 40mm, riveting time: 0.15s-3s. Documentation available. On-site inspection is possible.

Seam Closing Machine

Ras 22.15

Germany

1992

used

on request

INNO27222

Max. sheet thickness: 1.5mm, max. profile height: 20mm, dimensions X/Y/Z: approx. 1200mm/800mm/1200mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.

Coil Cradle

Schmitz/psm

Germany

2007

used

on request

INNO27178

A Schmitz/PSM slitting line for sheet metal processing is available. Coil weight: 5t/6t, strip width: 650mm, strip thickness (stainless steel): 0,4mm-1,5mm, coil inner diameter: 400mm/508mm/610mm, coil outer diameter: 1740mm/2000mm, speed: 100m/min, working direction: right(left) / DX - SX. Components: Decoiler with paper winder, deflection rollers, foil device on both sides, strip guiding, strip cutter, scrap winder, recoiler, coil take-up cross, hydraulic units as well as various tools and sanding belts. On-site inspection is possible.

Straightening Machine

Arku RM 3060.4/21

Germany

1999

used

on request

INNO27162

Material width: 600mm, max. sheet thickness: 4mm, number of straightening rollers: 21, straightening roller diameter: 30mm, material cross-section: 1800mm², speed: 6-36m/min, dimensions X/Y/Z: approx. 1500mm/2000mm/1900mm, weight: approx. 3000kg.

Section Shear

Geka Hydracop HYD-70

Germany

1992

used

on request

INNO27155

Punching force: 70t, max. punching capacity: 28mm/20mm, max. stroke: 80mm, working speed 19mm/20mm stroke: 48/37. Flat steel shears: Blade length: 455mm, max. cutting capacity length/thickness: 450mm/15mm. Angle steel shears: 90°: 130mm/130mm/13mm, 45°: 70mm/70mm/7mm. Round steel shears: Diameter: 45mm. Square steel shears: 45mm/45mm. Notch depth: 90mm, notch width: 52mm, material thickness: 13mm. Dimensions X/Y/Z: approx. 1300mm/2100mm/1800mm, weight: approx. 2400kg.

CNC Punch Laser Machine

Trumpf TruMatic 6000

Germany

2007

used

on request

INNO27127

Laser type: TruFlow 2700, punching force: 220kN, laser power: 2700W, max. sheet thickness: 8mm, working range X/Y: 2585mm/1280mm, speed X/Y/simultaneous: 90/60/108m/min, max. workpiece height punching/laser: 35mm/22mm. Dimensions X/Y/Z: 7500mm/8100mm/2400mm, weight: approx. 16000kg, operating hours: 73431h (12.06.2024). Including TrumaGrip GripMaster with pneumatic scissor lift table (400mm), TrumaLift SheetMaster 1305 with 4 movable tables, TrumaTool ToolMaster with 40 stations and chip conveyor. Resonator transmitter tube renewed (2022), diaphragm vacuum pump renewed (2023) and leak test carried out (2024). Documentation available. On-site inspection is possible.

Deburring Machine

Lissmac SBM-S 1000

Germany

2007

used

on request

INNO27071

A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available.

Billet Shear

Peddinghaus 214/200

Germany

unknown

used

on request

INNO27021

A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg.

Punching Machine

Bruderer BSTA 41

Germany

1980

used

on request

INNO26989

Press force: 400kN, stroke rate: 100-1200H/min, stroke adjustment: 13mm/15mm/19mm/25mm/32mm/38mm/44mm/51mm/57mm, max. fixed stroke: 57mm, ram adjustment: 57mm, installation opening: 690mm, max. belt passage width: 190mm, belt running height: 60mm-140mm, bed opening: 640mm-220mm. Dimensions X/Y/Z: approx. 3000mm/2200mm/1700mm, weight: approx. 6100kg. Documentation available. On-site inspection is possible.

Plate Shear

Eht TSS 4-60

Germany

1999

used

on request

INNO26985

Cutting length: 6000mm, max. material thickness: 4mm, blade length: 6000mm, passage from side stop to front stop: 200mm, top blade cutting angle: 1°, backgauge range: 10mm-1000mm, max. adjustment speed: 70mm/s. Dimensions X/Y/Z: approx. 6800mm/3500mm/2300mm, weight: approx. 21000kg. An on-site inspection is possible.

Section Shear

Mubea KLSH 550

Germany

unknown

used

on request

INNO26943

Hole punch projection: 310mm, table dimensions X/Y: 700mm/600mm, pressing force: 550kN, flat steel shears: 320mm/13mm. Dimensions X/Y/Z: 1200mm/600mm/1900mm, weight: approx. 1200kg. Tools included.

Sheet Metal Processing Centre

Schlebach Quadro TP/EZT 12050 RS 10

Germany

unknown

used

on request

INNO26912

Several Schlebach machines are available for complete thin sheet processing. 1) Profiling machine Quadro TP without cassettes, infeed width: 300mm-8000mm, control: Schneider Magelis. Including electronic length measurement, motor-driven roller knife for cross-cutting, documentation and spare parts list. 2) Infeed table EZT 12050 RS 10 with pivoting roller cutter (max. +10°). Length measurement min.: 1000mm, speed: 10m/min, infeed width: 1250mm, max. capacity non-ferrous metals/sheet steel/stainless steel sheet: 0.80mm/0.70mm/0.50mm. Documentation available. 3) Decoiler 2/600, max. coil width: 600mm, max. coil weight: 2000kg, max. coil inner diameter: approx. 510mm, max. coil outer diameter: approx. 1500mm. Documentation available. 4) Pair of exchangeable cassettes for Quadro, stations: 12, swivel capability: no, special profiling for non-ferrous metals with 0.5mm thickness. Documentation available for all machines.

CNC Folding Machine

Ras 74.30

Germany

2004

used

on request

INNO26881

Working width: 3200mm, max. sheet thickness at 400N/mm² with bending tool width 30mm: 4mm, min. bending radius: 1.25xsheet thickness, min. inner flange height: approx. 6xsheet thickness. Inner flange height: approx. 6xsheet thickness. Max. Opening height of upper beam: 400mm, max. adjustment range of bending and lower beam: 80mm, bending angle: 0°-180°, max. bending speed: 74°/s. Clamping speed upper beam DOWN/UP: 40mm/92mm, weight: approx. 5500kg, control: RAS System 6000, documentation available.

Riveting Machine

Böllhoff C-Zangen

Germany

1998

used

on request

INNO26832

There are 3x punch rivet feeders and 2x C-pliers Böllhoff available. Self-pierce rivet feeder: 2x ABF, 1x LG, years of construction: 1998-2003, rivets: 3x4mm and 3x5mm. C-tongs: Year of manufacture: 1998, max. rivet setting pressure: 250bar, max. rivet setting force: 50kN. Documentation available. On-site inspection is possible.

Notching Machine

Henning/rotox BVH8K2/SAF 165

Germany

2007

used

on request

INNO26705

There are 2 notching machines available. Rotox SAF 165, year of manufacture: 2007, saw blade diameter: 250mm, speed: 2800rpm, pressure: 6-7bar, weight: 273kg. Hanning BVH8K2, speed: 2700rpm.

Hydraulic Steel Shear

Bernardo HPS 90

Germany

2018

used

on request

INNO26601

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm

Punching Machine

Halbritter Gmbh HM15

Germany

2010

used

on request

INNO26510

Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.