Innovac GmbH Used machines from Germany
Innovac used-machines Milling machines [41 - 60 of 136]
Universal-Milling-Machine-Malick-and-Walkows-1000x300 used
Universal Milling Machine
Malick & Walkows 1000x300
Germany
1970
used
on request
INNO31675
A conventional universal milling machine Malick & Walkows is available. Table dimensions X/Y: 1000mm/300mm, speed: 1120rpm, travel X/Y/Z: 900mm/300mm/500mm, quill stroke: 80mm, feed rate: 250mm/min, machine dimensions X/Y/Z: approx. 1700mm/1900mm/1700mm, weight: approx. 1750kg. Including machine vise and accessories. An on-site inspection is possible.
CNC-Universal-Milling-Machine-Maho-MH-500-W used
CNC Universal Milling Machine
Maho MH 500 W
Germany
1991
used
on request
INNO31655
Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible.
CNC-Milling-Machine-Optimum-OPTI-mill-F-105 used
CNC Milling Machine
Optimum OPTI mill F 105
Germany
2017
used
on request
INNO31622
X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening width: 1055mm, foundation/installation area: 1520x2080mm, weight: 2.8t. An on site inspection is possible.
CNC-Tool-Milling-Machine-Union-Bielefeld-UWF-3.2-CNC used
CNC Tool Milling Machine
Union Bielefeld UWF 3.2 CNC
Germany
1989
used
on request
INNO31577
Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible.
Milling-Machine-Mikron-WF-32CH-TNC-355 used
Milling Machine
Mikron WF 32CH/ TNC 355
Germany
unknown
used
on request
INNO31558
X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible.
Universal-CNC-Tool-Milling-and-Drilling-Machine-Friedrich-Deckel-FP4-AT used
Universal CNC Tool Milling and Drilling Machine
Friedrich Deckel FP4 AT
Germany
1987
used
on request
INNO31545
Number of T-slots: 8, rated current: 23A, controls: CONTOUR 3, with tool magazine. An on-site inspection is possible.
CNC-Milling-Machine-Haas-TM-1H used
CNC Milling Machine
Haas TM-1H
Germany
2006
used
on request
INNO31527
Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible.
Universal-Milling-Machine-Index-SV4 used
Universal Milling Machine
Index SV4
Germany
unknown
used
on request
INNO31490
A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement.
Vertical-Milling-Machine-Bernhard-Steinel-SV-4g used
Vertical Milling Machine
Bernhard Steinel SV 4g
Germany
1969
used
on request
INNO31487
Offered is a universal tool milling machine. Working area X/Y/Z: approx. 330mm/145mm/370mm, table clamping surface: 630mm × 180mm, spindle speeds: 63-3150rpm (across 8 steps), spindle mount: SK 30, connected load: 380V/16A, control: manual. Equipped with swiveling vertical head, manual axis feed via handwheels, T-slot table, integrated chip support tray. Overall dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm. Inspection possible by arrangement.
Horizontal-Milling-Machine-Fritz-Werner-HF-1.6 used
Horizontal Milling Machine
Fritz Werner HF 1.6
Germany
1977
used
on request
INNO31485
Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.
CNC-Bed-Milling-Machine-Cmc-BF-01 used
CNC Bed Milling Machine
Cmc BF-01
Germany
1992
used
on request
INNO31450
A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.
Milling-and-Drilling-Machine-Hermle-deckel-FW-801-FW-710-FP-2 used
Milling and Drilling Machine
Hermle/deckel FW 801/FW 710/FP 2
Germany
1987
used
on request
INNO31342
Three old Hermle and Deckel milling and drilling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred.
CNC-Milling-Machine-Emco-EmcoMill-E900 used
CNC Milling Machine
Emco EmcoMill E900
Germany
2013
used
on request
INNO31321
A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible.
CNC-Milling-Machine-Sw-BA-35-CNC used
CNC Milling Machine
Sw BA 35 CNC
Germany
1997
used
on request
INNO31311
A CNC double-station milling machine Schwäbische Werkzeugmaschinen with 3 axes is available. Stations: 2, travel X/Y/Z: 700mm/500mm/500mm, positioning accuracy: +/-0.02mm, position scatter: +/-0.01mm, rapid traverse: 25m/min, feed force: 8500N. Machine dimensions X/Y/Z: approx. 6700mm/3200mm/3200mm, weight: approx. 11500kg, control: Siemens Sinumerik 840. The left sliding cover is defective, however another one from stock can be adapted for it. Documentation available. An on-site inspection is possible.
Bed-Type-Milling-Machine-Cme-FS-1 used
Bed Type Milling Machine
Cme FS-1
Germany
unknown
used
on request
INNO31299
Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible.
CNC-Milling-Machine-Hedelius-BC100-2500 used
CNC Milling Machine
Hedelius BC100-2500
Germany
2003
used
on request
INNO31277
Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible.
CNC-Milling-Machine-Hedelius-R80K-2300 used
CNC Milling Machine
Hedelius R80K-2300
Germany
2009
used
on request
INNO31276
Travel X/Y/Z: 2300mm/800mm/600mm, table dimensions X/Y: 1400mm/750mm, rotary table dimensions X/Y: 800mm/630mm, spindle speed: 12000rpm, tool positions: 30, tool holder: SK40, coolant pressure: 20bar, feed rate: 30m/min, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6200mm/3700mm/3600mm, weight: approx. 16000kg, control: Heidenhain iTNC 530, control hours: 63330h, machine hours: 61892h, operating hours: 28295h. Including internal coolant supply, 3D measuring probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible.
Milling-Machine-Zimmermann-FZ-4-V used
Milling Machine
Zimmermann FZ 4 V
Germany
1985
used
on request
INNO31258
A conventional milling machine Zimmermann including a Heidenhain digital display is available. Table dimensions X/Y: 1400mm/800mm, tool holder: SK40, travel X/Y/Z: 1600mm/900mm/300mm, spindle-table distance range: 30mm-1180mm, milling head swivel: 45°/90°, feed rate: 2400mm/min, speed: 2800rpm. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/3150mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible.
CNC-Universal-Milling-Machine-Fritz-Heckert-FQ-560 used
CNC Universal Milling Machine
Fritz Heckert FQ 560
Germany
1990
used
on request
INNO31241
Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.
Tool-Milling-Machine-Emco-FB-4 used
Tool Milling Machine
Emco FB-4
Germany
unknown
used
on request
INNO31181
A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible.